[1]赵赏鑫.油气长输管道工程自动焊施工的技术准备要点[J].油气储运,2021,40(12):1409-1415.[doi:10.6047/j.issn.1000-8241.2021.12.012]
 ZHAO Shangxin.Key points of technical preparation for automatic welding of longdistance oil and gas pipelines[J].Oil & Gas Storage and Transportation,2021,40(12):1409-1415.[doi:10.6047/j.issn.1000-8241.2021.12.012]
点击复制

油气长输管道工程自动焊施工的技术准备要点

参考文献/References:

[1] 隋永莉. 油气管道环焊缝焊接技术现状及发展趋势[J]. 电焊机, 2020,50(9):53-59. SUI Y L. Current situation and development trend of girth welding technologyfor oil and gas pipeline[J]. Electric Welding Machine, 2020, 50(9): 53-59.
[2] 王婷,王新,李在蓉,薛鲁宁,高振波,王毓薇. 国内外长输油气 管道失效对比[J]. 油气储运,2017,36(11):1258-1264. WANG T, WANG X, LI Z R, XUE L N, GAO Z B, WANG Y W. Comparison on failures of long-distance oil & gas pipelines at home and abroad[J]. Oil & Gas Storage and Transportation, 2017, 36(11): 1258-1264.
[3] 程玉峰. 保障中俄东线天然气管道长期安全运行的若干技术思 考[J]. 油气储运,2020,39(1):1-8. CHENG Y F. Technical insights into the long-term integrity and sustainability of China-Russia Eastern Gas Pipeline[J]. Oil & Gas Storage and Transportation, 2020, 39(1): 1-8.
[4] 戴联双,考青鹏,杨辉,胡亚博. 高强度钢管道环焊缝隐患治理 措施研究[J]. 石油管材与仪器,2020,6(2):32-37. DAI L S, KAO Q P, YANG H, HU Y B. Hazard control measurement of girth weld in high strength steel pipeline[J]. Petroleum Instruments, 2020, 6(2): 32-37.
[5] 张振永. 高钢级大口径天然气管道环焊缝安全提升设计关 键[J]. 油气储运,2020,39(7):740-748. ZHANG Z Y. Key factors for safety improvement design of girth weld in high-grade large diameter natural gas pipelines[J]. Oil & Gas Storage and Transportation, 2020, 39(7): 740-748.
[6] LIU X B, ZHANG H, WU K, XIA M Y, CHEN Y F, LI M. Buckling failure mode analysis of buried X80 steel gas pipeline under reverse fault displacement[J]. Engineering Failure Analysis, 2017, 77: 50-64.
[7] European Gas Pipeline Incident Data Group. 9th Report of the gas pipeline incidents of European gas pipeline: EGIG 11.R.0402[R]. Groningen: EGIG, 2013: 17-20, 53.
[8] MAJID Z,MOHSIN R. Failure investigation of natural gas pipeline[J]. Arabian Journal for Science & Engineering, 2012, 37(4):1083-1088.
[9] 隋永莉,王鹏宇. 中俄东线天然气管道黑河—长岭段环焊缝焊 接工艺[J]. 油气储运,2020,39(9):961-970. SUI Y L, WANG P Y. Girth welding technology used in Heihe- Changling Section of China-Russia Eastern Gas Pipeline[J]. Oil & Gas Storage and Transportation, 2020, 39(9): 961-970.
[10] 张小强,刘艳东,蒋庆梅. 大口径管道自动焊技术的设计及施 工要求[J]. 焊接技术,2016,45(9):111-114. ZHANG X Q, LIU Y D, JIANG Q M. Design and construction requirements of automatic welding for large diameter pipes[J]. Welding Technology, 2016, 45(9): 111-114.
[11] 张小强,蒋庆梅,詹胜文,谷青悦,金鑫,王琴. 针对中俄东线 高钢级大口径输气管道自动焊的设计提升[J]. 天然气工业, 2020,40(10):126-132. ZHANG X Q, JIANG Q M, ZHAN S W, GU Q Y, JIN X, WANG Q. Design improvement measures for the automatic welding of high-steel-grade andlarge-diameter gas line pipes in the project of the China-Russian Eastern Gas Pipeline[J]. Natural Gas Industry, 2020, 40(10): 126-132.
[12] 张小强,侯宇,蒋庆梅,冯伟. 中俄东线直径1 422 mm X80 钢级 冷弯管设计参数的确定[J]. 油气储运,2020,39(2):222-225. ZHANG X Q, HOU Y, JIANG Q M, FENG W. Determination of the design parameters of X80 cold bending pipe with 1 422 mm diameter in China-Russia Eastern Gas Pipeline[J]. Oil & Gas Storage and Transportation, 2020, 39(2): 222-225.
[13] 蒋庆梅,张小强,魏新峰,李宝华. 减少中俄天然气东线焊接连 头口的设计新思路[J]. 焊接技术,2018,47(9):85-88. JIANG Q M, ZHANG X Q, WEI X F, LI B H. New design ideas for reducing tie in welds in China-Russia EasternNatural Gas Pipeline[J]. Welding Technology, 2018, 47(9): 85-88.
[14] 梁涛. 管道全自动焊接质量控制浅谈[J]. 金属加工(热加工), 2018(10):73-75. LIANG T. Research welding quality control on pipeline automatic welding[J]. Metal Working, 2018(10): 73-75.
[15] 吕健,马子健,王亮. 中俄东线D 1 422 mm 管道自动焊装备应 用及分析[J]. 焊接技术,2019,48(6):61-64. LYU J, MA Z J, WANG L. Application and analysis of automatic welding equipment for D 1 422 mm pipeline in China- Russia Eastern Pipeline Project[J]. Welding Technology, 2019, 48(6): 61-64.
[16] 袁吉伟,张敬洲,朱文学. 中俄东线长输管道自动焊焊接难点 解析[J]. 金属加工(热加工),2020(3):30-32. YUAN J W, ZHANG J Z, ZHU W X. Analysis of welding difficulties in the automatic welding of the long distance pipeline on the eastern route between China and Russia[J]. Metal Working, 2020(3): 30-32.
[17] 蒋庆梅,张小强,张弥,李朝. 中俄东线天然气管道环焊缝断裂 韧性的确定[J]. 焊接技术,2017,46(9):82-85. JIANG Q M, ZHANG X Q, ZHANG M, LI C. Determination of fracture toughness for girth weld in China-Russia Eastern Natural Gas Pipeline[J]. Welding Technology, 2017, 46(9): 82-85.
[18] 周广言,郑娜,刘全利,吕新昱,赵杰,姚志峰. 全自动超声检测 的工艺评定[J]. 无损检测,2017,39(11):62-64,67. ZHOU G Y, ZHENG N, LIU Q L, LYU X Y, ZHAO J, YAO Z F. Automatic ultrasonic testing procedure qualification[J]. Nondestructive Testing, 2017, 39(11): 62-64, 67.
[19] 蒋庆梅,张小强,周广言,余志峰. 中俄东线管道的无损检测方 法及应用[J]. 无损检测,2020,42(7):28-34. JIANG Q M, ZHANG X Q, ZHOU G Y, YU Z F. Nondestructive testing method and application of China-Russia Eastern Natural Gas Pipeline[J]. Nondestructive Testing, 2020, 42(7): 28-34.
[20] 姜昌亮. 中俄东线天然气管道工程管理与技术创新[J]. 油气储 运,2020,39(2):121-129. JIANG C L. Management and technological innovation in China-Russia Eastern Gas Pipeline Project[J]. Oil & Gas Storage and Transportation, 2020, 39(2): 121-129.
[21] 张振永. 中俄东线X80 钢级φ 1 422 mm 管道工程设计关键技 术应用[J]. 焊管,2019,42(7):64-71. ZHANG Z Y. Application of key technologies in design of X80 φ 1 422 mm pipeline engineering of China-Russia East Natural Gas Pipeline Project[J]. Welded Pipe and Tube, 2019, 42(7): 64-71.
[22] 薛岩,周广言,李佳,闫臣. 油气管道环焊缝自动超声检测与射 线检测方法对比[J]. 无损检测,2016,38(11):45-48,73. XUE Y, ZHOU G Y, LI J, YAN C. Contrast of AUT/ RT detection method on oil and gas pipeline girth weld[J]. Nondestructive Testing, 2016, 38(11): 45-48, 73.
[23] 刘全利,苗绘,吕新昱,周广言. 中俄东线天然气管道工程DR 设备校验方法[J]. 油气储运,2020,39(4):453-458. LIU Q L, MIAO H, LYU X Y, ZHOU G Y. Calibration method of DR equipment in China-Russia Eastern Gas Pipeline[J]. Oil & Gas Storage and Transportation, 2020, 39(4): 453-458.
[24] 刘芳媛,侯磊,吕家兴,刘少柱. 组对焊接管道自由端最大允许 位移的模拟计算[J]. 油气储运,2021,40(7):747-752. LIU F Y, HOU L, LYU J X, LIU S Z. Simulating calculation on maximum allowable displacement of the free end of pipeline based on butt welding[J]. Oil & Gas Storage and Transportation, 2021, 40(7): 747-752.
[25] 黄波,王旺,王佳,李轩,何庆中,左超. 全焊接球阀焊接残余应 力及变形数值模拟[J]. 油气储运,2021,40(8):895-902. HUANG B, WANG W, WANG J, LI X, HE Q Z, ZUO C. Numerical simulation on welding residual stress and deformation of all-welded ball valves[J]. Oil & Gas Storage and Transportation, 2021, 40(8): 895-902.

相似文献/References:

[1]高永东,赵海宴,张宏洲.管道自动焊技术在西气东输工程中的应用[J].油气储运,2003,22(12):53.[doi:10.6047/j.issn.1000-8241.2003.12.016]
 GAO Yongdong,ZHAO Haiyan.The Application of Automatic Welding Technol ogy in West-to-East Gas Pipeline Project[J].Oil & Gas Storage and Transportation,2003,22(12):53.[doi:10.6047/j.issn.1000-8241.2003.12.016]
[2]黄玲,吴明,王卫强,等.基于Arc GISEngine的三维长输管道信息系统构建[J].油气储运,2014,33(6):615.[doi:10.6047/j.issn.1000-8241.2014.06.009]
 HUANG Ling,WU Ming,WANG Weiqiang,et al.Construction of 3D long-distance pipeline information system based on ArcGIS Engine[J].Oil & Gas Storage and Transportation,2014,33(12):615.[doi:10.6047/j.issn.1000-8241.2014.06.009]
[3]郭磊,许芳霞,周利剑,等.管道完整性系统数据集成与应用[J].油气储运,2014,33(6):593.[doi:10.6047/j.issn.1000-8241.2014.06.005]
 GUO Lei,XU Fangxia,ZHOU Lijian,et al.Data integration and application of pipeline integrity management system[J].Oil & Gas Storage and Transportation,2014,33(12):593.[doi:10.6047/j.issn.1000-8241.2014.06.005]
[4]隋永莉,吴宏.我国长输油气管道自动焊技术应用现状及展望[J].油气储运,2014,33(9):913.[doi:10.6047/j.issn.1000-8241.2014.09.001]
 SUI Yongli,WU Hong.Current and future applications of automatic welding technology for long-distance oil/gas pipeline in China[J].Oil & Gas Storage and Transportation,2014,33(12):913.[doi:10.6047/j.issn.1000-8241.2014.09.001]
[5]赵国辉.长输油气管道自控技术的发展与中俄东线SCADA系统[J].油气储运,2020,39(01):1.
 ZHAO Guohui.Development of long-distance oil and gas pipeline automatic control technology and SCADA system for China–Russia Eastern Gas Pipeline [J].Oil & Gas Storage and Transportation,2020,39(12):1.
[6]王婷 王新 李在蓉 薛鲁宁 高振波 王毓薇.国内外长输油气管道失效对比分析[J].油气储运,2017,36(预出版):1.
 WANG Ting,WANG Xin,LI Zairong,et al.Comparison and analysis on failures of long-distance oil & gas pipelines at home and abroad[J].Oil & Gas Storage and Transportation,2017,36(12):1.
[7]隋永莉 王鹏宇.中俄东线天然气管道黑河—长岭段环焊缝焊接工艺[J].油气储运,2020,39(09):961.[doi:10.6047/j.issn.1000-8241.2020.09.001]
 SUI Yongli,WANG Pengyu.Girth welding technology used in Heihe-Changling Section of China-Russia Eastern Gas Pipeline[J].Oil & Gas Storage and Transportation,2020,39(12):961.[doi:10.6047/j.issn.1000-8241.2020.09.001]
[8]胡亚博,吴志平,吴世勤,等.高压直流接地极对埋地管道腐蚀的影响和管控思考[J].油气储运,2021,40(03):256.[doi:10.6047/j.issn.1000-8241.2021.03.003]
 Hu Yabo,Wu Zhiping,Wu Shiqin,et al.Influence of HVDC grounding electrode on corrosion of buried pipelines and thought on risk management and control[J].Oil & Gas Storage and Transportation,2021,40(12):256.[doi:10.6047/j.issn.1000-8241.2021.03.003]
[9]陈娟,宋锦,张悦,等.高钢级大口径油气管道在役自动焊工艺[J].油气储运,2021,40(08):914.[doi:10.6047/j.issn.1000-8241.2021.08.012]
 CHEN Juan,SONG Jin,ZHANG Yue,et al.In-service automatic welding technology for high-grade large-diameter oil and gas pipelines[J].Oil & Gas Storage and Transportation,2021,40(12):914.[doi:10.6047/j.issn.1000-8241.2021.08.012]

备注/Memo

收稿日期:2021-08-04;修回日期:2021-09-06;编辑:李在蓉
基金项目:国家石油天然气管网集团有限公司科学研究与技术开发项目“高钢级管道环焊缝失效机理研究”,WZXGL202105。
作者简介:赵赏鑫,男,1979 年生,高级工程师,2006 年博士毕业于中国石油大学(北京)机械设计与理论专业,现主要从事油气管道建设管理工作。地址:河北省廊坊市经济技术开发区四海路18 号,065000。电话:0316-5973763。Email:zhaosx@pipechina.com.cn

更新日期/Last Update: 2021-12-25