[1]吴锴,张宏,杨悦,等.考虑强度匹配的高钢级管道环焊缝断裂评估方法[J].油气储运,2021,40(09):1008-1016.[doi:10.6047/j.issn.1000-8241.2021.09.006]
 WU Kai,ZHANG Hong,YANG Yue,et al.Fracture assessment method for girth welds of high-grade steel pipelines considering strength matching[J].Oil & Gas Storage and Transportation,2021,40(09):1008-1016.[doi:10.6047/j.issn.1000-8241.2021.09.006]
点击复制

考虑强度匹配的高钢级管道环焊缝断裂评估方法

参考文献/References:

[1] KUMAR V,GERMAN M D,WILKENING W W,ANDREWS W R,DELORENZI H G,MOWBRAY D F. Advances in elasticplastic fracture analysis:EPRI-NP-3607[R]. Schenectady:General Electric Co.,1984:12-21.
[2] KUMAR V,GERMAN M D. Elastic-plastic fracture analysis of through-wall and surface flaws in cylinders:EPRI-NP-5596[R]. Schenectady:General Electric Co.,1988:1-7.
[3] AINSWORTH R A,BANNISTER A C,ZERBST U. An overview of the European flaw assessment procedure SINTAP and its validation[J]. International Journal of Pressure Vessels and Piping,2000,77(14/15):869-876.
[4] 隋永莉. 油气管道环焊缝焊接技术现状及发展趋势[J]. 电焊机,2020,50(9):53-59.
SUI Y L. Current situation and development trend of girth welding technology for oil and gas pipeline[J]. Electric Welding Machine,2020,50(9):53-59.
[5] 邹斌,杨锋平,白鹤,王劲. 在役X80 输气管道环焊缝失效评估方法[J]. 油气储运,2021,40(8):874-879,887.
ZOU B,YANG F P,BAI H,WANG J. Method for assessing girth weld failure of X80 gas pipelines in service [J]. Oil & Gas Storage and Transportation,2021,40(8):874-879,887.
[6] 单克,帅健,杨光,孟伟,张浩. 美国油气管道基本失效概率评估方法及启示[J]. 油气储运,2020,39(5):530-535.
SHAN K,SHUAI J,YANG G,MENG W,ZHANG H. Evaluation method for basic failure probability of oil and gas pipeline based on accident statistics in the United States and enlightenments[J]. Oil & Gas Storage and Transportation,2020,39(5):530-535.
[7] 张振永. 高钢级大口径天然气管道环焊缝安全提升设计关键[J]. 油气储运,2020,39(7):740-748.
ZHANG Z Y. Key factors for safety improvement design of girth weld in high-grade large diameter natural gas pipelines[J]. Oil & Gas Storage and Transportation,2020,39(7):740-748.
[8] 帅健,王旭,张银辉,武旭. 高钢级管道环焊缝主要特征及安全性评价[J]. 油气储运,2020,39(6):623-631.
SHUAI J,WANG X,ZHANG Y H,WU X. Main characteristics and safety assessment of girth welds in high grade steel pipelines[J]. Oil & Gas Storage and Transportation,2020,39(6):623-631.
[9] 张宏,吴锴,刘啸奔,杨悦,隋永莉,张振永. 直径1 422 mm X80 管道环焊接头应变能力数值模拟方法[J]. 油气储运,2020,39(2):162-168.
ZHANG H,WU K,LIU X B,YANG Y,SUI Y L,ZHANG Z Y. Numerical simulation method for strain capacity of girth welding joint on X80 pipeline with 1 422 mm diameter[J]. Oil & Gas Storage and Transportation,2020,39(2):162-168.
[10] WU K,LIU X B,ZHANG H,SUI Y L,ZHANG Z Y,YANG D,et al. Fracture response of 1 422 mm diameter pipe with double-V groove weld joints and circumferential crack in fusion line[J]. Engineering Failure Analysis,2020,115:104641.
[11] YANG Y,ZHANG H,WU K,CHEN P C,SUI Y L,YANG D,et al. Strain capacity analysis of the mismatched welding joint with misalignments of OD 1 422 mm X80 steel pipelines:an experimental and numerical investigation[J]. Journal of Pipeline Science and Engineering,2021,1(2):212-224.
[12] TKACZYK T,O'DOWD N P,NIKBIN K. Fracture assessment procedures for steel pipelines using a modified reference stress solution[J]. Journal of Pressure Vessel Technology,2009,131(3):031409.
[13] KASTNER W,RÖHRICH E,SCHMITT W,STEINBUCH R. Critical crack sizes in ductile piping[J]. International Journal of Pressure Vessel and Piping,1981,9(3):197-219.
[14] KUMAR V,GERMAN M D,SHIH C F. Engineering approach for elastic-plastic fracture analysis:EPRI-NP-1931[R]. Schenectady:General Electric Co.,1981:15-20.
[15] LEI Y,AINSWORTH R A. A J integral estimation method for cracks in welds with mismatched mechanical properties[J]. International Journal of Pressure Vessels and Piping,1997,70(3):237-245.
[16] LEI Y,AINSWORTH R A. Failure assessment diagrams for cracks in welds with mismatched mechanical properties[C]. Montreal:American Society of Mechanical Engineers (ASME) Pressure Vessels and Piping Conference,1996:65-73.
[17] WU K,ZHANG H,YANG Y,LIU X B. Numerical analysis of the crack driving force of mismatched girth welded pipes subject to large plastic deformations[C]. Virtual Online:American Society of Mechanical Engineers,Pressure Vessels and Piping Conference,2021:61188.
[18] LEI Y,LI P,WAMG Z. A new J integral estimation method for defects in materials with non-Ramberg-Osgood stress-strain relationships:East China University of Science and Technology Report for Project 85-924-02-021[R]. Shanghai:East China University of Science and Technology,1994:9-17.
[19] KIM Y J,SHIM D J,NIKBIN K,KIM Y J,HWANG S S,KIM J S. Finite element based plastic limit loads for cylinders with part-through surface cracks under combined loading[J]. International Journal of Pressure Vessels and Piping,2003,80(7/8):527-540.
[20] KIM S H,HAN J J,KIM Y J. Limit load solutions of V-groove welded pipes with a circumferential crack at the centre of weld[J]. Procedia Materials Science,2014,3:706-713.
[21] KIM J S,SONG T K,KIM Y J,JIN T E. Strength mis-match effect on limit loads for circumferential surface cracked pipes[J]. Engineering Fracture Mechanics,2009,76(8):1074-1086.
[22] AINSWORTH R A. The assessment of defects in structures of strain hardening material[J]. Engineering Fracture Mechanics,1984,19(4):633-642.
[23] JIA P Y,JING H Y,XU L Y,HAN Y D,ZHAO L. A modified fracture assessment method for pipelines under combined inner pressure and large-scale axial plastic strain[J]. Theoretical and Applied Fracture Mechanics,2017,87:91-98.
[24] KIM Y J,BUDDEN P J. Reference stress approximations for J and COD of circumferential through-wall cracked pipes[J]. International Journal of Fracture,2002,116(3):195-218.

相似文献/References:

[1]王鹏,刘迎来,吉玲康,等.试样形状对高强度感应加热弯管拉伸实验的影响[J].油气储运,2011,30(05):362.[doi:10.6047/j.issn.1000-8241.2011.05.012]
 Wang Peng,Liu Yinglai,Ji Lingkang,et al.Influence of sample shape on high-intensity induction heated bend pipe in tensile test[J].Oil & Gas Storage and Transportation,2011,30(09):362.[doi:10.6047/j.issn.1000-8241.2011.05.012]
[2]张振永 郭彬 管军 陈文国. 超大输量天然气管道工艺方案筛选[J].油气储运,2013,32(8):857.[doi:10.6047/j.issn.1000-8241.2013.08.012]
 Zhang Zhenyong,Guo Bin,Guan Jun,et al.Selection of transmission program for super-throughput gas pipeline[J].Oil & Gas Storage and Transportation,2013,32(09):857.[doi:10.6047/j.issn.1000-8241.2013.08.012]
[3]帅健 孔令圳.高钢级管道环焊缝应变能力评价[J].油气储运,2017,36(预出版):1.
 SHUAI Jian,KONG Lingzhen.Evaluation on strain capacity of girth weld in high-grade pipeline[J].Oil & Gas Storage and Transportation,2017,36(09):1.
[4]臧雪瑞 顾晓婷 王秋妍 王立航.含腐蚀缺陷高钢级输气管道的失效压力模型[J].油气储运,2019,38(预出版):1.
 ZANG Xuerui,GU Xiaoting,WANG Qiuyan,et al.A failure pressure model for high-grade gas pipelines with corrosion defects[J].Oil & Gas Storage and Transportation,2019,38(09):1.
[5]臧雪瑞,顾晓婷,王秋妍,等.含腐蚀缺陷高钢级输气管道的失效压力模型[J].油气储运,2019,38(03):285.[doi:10.6047/j.issn.1000-8241.2019.03.007]
 ZANG Xuerui,GU Xiaoting,WANG Qiuyan,et al.A failure pressure model for high-grade gas pipelines with corrosion defects[J].Oil & Gas Storage and Transportation,2019,38(09):285.[doi:10.6047/j.issn.1000-8241.2019.03.007]
[6]李荣光 张巍 赵振 于憬 汤斌 孙旭 邸曼丽 王亚军.高钢级管道环焊缝缺陷修复技术探讨[J].油气储运,2020,39(01):1.
 LI Rongguang,ZHANG Wei,ZHAO Zhen,et al.Discussion on repair technology of girth weld defects of high-grade steel pipelines[J].Oil & Gas Storage and Transportation,2020,39(09):1.
[7]帅健 王旭 张银辉 武旭.高钢级管道环焊缝主要特征及安全性评价[J].油气储运,2020,39(06):623.[doi:10.6047/j.issn.1000-8241.2020.06.003]
 SHUAI Jian,WANG Xu,ZHANG Yinhui,et al.Main characteristics and safety assessment of girth welds in high grade steel pipelines[J].Oil & Gas Storage and Transportation,2020,39(09):623.[doi:10.6047/j.issn.1000-8241.2020.06.003]
[8]李荣光 张巍 赵振 于憬 汤斌 孙旭 邸曼丽 王亚军.高钢级管道环焊缝缺陷修复技术探讨[J].油气储运,2020,39(03):307.[doi:10.6047/j.issn.1000-8241.2020.03.009]
 LI Rongguang,ZHANG Wei,ZHAO Zhen,et al.Discussion on repair technology of girth weld defects of high-grade steel pipelines[J].Oil & Gas Storage and Transportation,2020,39(09):307.[doi:10.6047/j.issn.1000-8241.2020.03.009]

备注/Memo

收稿日期:2021-04-30;修回日期:2021-08-11;编辑:张雪琴
基金项目:国家自然科学基金资助项目“逆断层作用下X80 管道屈曲演化与韧性破损机理研究”,52004314;新疆自治区天山青年计划项目“复杂载荷作用下高钢级管道韧性断裂与后屈曲失效行为”,2019Q088。
作者简介:吴锴,男,1994 年生,在读博士生,2018 年硕士毕业于中国石油大学(北京)安全工程专业,现主要从事油气装备失效分析与完整性管理方向的研究工作。地址:北京市昌平区府学路18 号中国石油大学(北京),102249。电话:13691133698。Email:wk0609@126.com
通信作者:张宏,男,1963 年生,教授,博士生导师,2003 年博士毕业于中国石油大学(北京)机械设计及理论专业,现主要从事油气储运设施结构强度的研究工作。地址:北京市昌平区府学路18 号中国石油大学(北京),102249。电话:13601034401。Email:hzhang@cup.edu.cn

更新日期/Last Update: 2021-09-25