[1]李雪,王晓霖,肖文涛.成品油管道混油动态体积分数判断两段式切割法[J].油气储运,2017,36(10):1149-1153.[doi:10.6047/j.issn.1000-8241.2017.10.008]
 LI Xue,WANG Xiaolin,XIAO Wentao.Two-section cutting method of contamination in products pipeline by dynamic volume fraction judgment[J].Oil & Gas Storage and Transportation,2017,36(10):1149-1153.[doi:10.6047/j.issn.1000-8241.2017.10.008]
点击复制

成品油管道混油动态体积分数判断两段式切割法

参考文献/References:

[1] 杨筱蘅. 输油管道设计与管理[M]. 东营:中国石油大学出版社,2011:76-81.
YANG X H. Pipeline design and management[M]. Dongying:China University of Petroleum Press,2011:76-81.
[2] 文林. 成品油管道顺序输送优化运行研究[D]. 西安:西安石油大学,2014:5-7.
图4 某成品油管道末站混油体积分数分布曲线划分图WEN L. Research on batching transport operation optimizationof the products oil pipeline[D]. Xi'an:Xi'an Shiyou University,2014:5-7.
[3] 吕坦. 成品油管道顺序输送混油分析与模拟研究[D]. 西安:西安石油大学,2012:5-17.
LYU T. The analysis and simulation study about batchingtransportation of mix oil by products pipeline[D]. Xi'an:Xi'anShiyou University,2012:5-17.
[4] 吴玉国,田垦. 成品油管道技术发展现状与趋势[J]. 现代化工,2014,34(5):4-8.
WU Y G,TIAN K. Current status and development trends ofrefined oil pipeline technology[J]. Modern Chemical Industry,2014,34(5):4-8.
[5] 于金广. 鲁皖成品油管道增设混油处理设施的实践[J]. 油气储运,2013,32(2):157-161.
YU J G. Practice of installing contaminated treatment facilities inShangdong-Anhui Products Pipeline[J]. Oil & Gas Storage andTransportation,2013,32(2):157-161.
[6] 付永杰. 华北成品油管网混油控制及处理改进措施[J]. 油气储运,2013,32(10):1058-1062.
FU Y J. Improvement on the control and treatment of mixedoil in North China Product Oil Pipeline Network[J]. Oil & GasStorage and Transportation,2013,32(10):1058-1062.
[7] 吕坦,文林,王佳,等. 成品油顺序输送混油与调度研究[J]. 辽宁化工,2013,42(11):1346-1348.
LYU T,WEN L,WANG J,et a1. Study on contaminated oilquantity and scheduling of batch transportation of products[J].
Liaoning Chemical Industry,2013,42(11):1346-1348.
[8] 宫敬,王琴,王卫东,等. 成品油管道的混油计算方法研究[J]. 管道技术与设备,2013(1):1-3.
GONG J,WANG Q,WANG W D,et a1. Study of the calculationmethod for mixing volume in products pipeline[J]. PipelineTechnique and Equipment,2013(1):1-3.
[9] 赵晓刚. 成品油管道混油量计算方法及减少混油量措施探讨[J].
当代化工,2012,41(3):328-330.
ZHAO X G. Study on calculating methods of mixed oil quantity inthe product pipeline and measures to reduce mixed oil quantity[J].
Contemporary Chemical Industry,2012,41(3):328-330.
[10] 赵堂玉. 兰郑长管道混油处理相关问题和建议[J]. 油气储运,2015,34(4):400-402.
ZHAO T Y. Problems in treatment of mixed oil in Lanzhou Zhengzhou-Changsha Products Pipeline and relevantsuggestions[J]. Oil & Gas Storage and Transportation,2015,34(4):400-402.
[11] 董荣国. 华东成品油管道混油影响因素的分析和优化控制措施[J]. 石油库与加油站,2013,22(1):12-17.
DONG R G. Influencing factors analysis on mixed oil amountin East China Oil Product Pipeline and optimization controlmeasures[J]. Oil Depot and Gas Station,2013,22(1):12-17.
[12] 王晏林. 兰成渝成品油管道油品质量控制研究[D]. 北京:中国石油大学(北京),2012:4-6.
WANG Y L. Research on product oil quality control ofLanzhou-Chengdu-Chongqing Products Pipeline[D]. Beijing:China University of Petroleum(Beijing),2012:4-6.
[13] 王凤娟,李立婉,王思维. 提高顺序输送成品油管道混油切割精度方法[J]. 当代化工,2014,43(7):1376-1378.
WANG F J,LI L W,WANG S W. Method to improve thecontamination cutting precision during product oil batchtransportation[J]. Contemporary Chemical Industry,2014,43(7):1376-1378.
[14] 丁小勇. 西部成品油管道混油切割新方法[J]. 油气储运,2013,32(12):1279-1281.
DING X Y. New method of contaminated oil cutting usedin Western Product Pipeline[J]. Oil & Gas Storage andTransportation,2013,32(12):1279-1281.
[15] 郭祎,张道全,刘鹏,等. 西部成品油管道末站混油切割改进措施[J]. 油气储运,2011,30(7):520-522.
GUO Y,ZHANG D Q,LIU P, et al. The improvement ofmixed oil cutting in Western Product Pipeline[J]. Oil & GasStorage and Transportation,2011,30(7):520-522.
[16] 祝和军,刘玉梅. 克乌成品油管道工程设计[J]. 油气储运,1999,18(2):34-36,59.
ZHU H J,LIU Y M. The engineering project of Kewu ProductPipeline[J]. Oil & Gas Storage and Transportation,1999,18(2):34-36,59.
[17] 任瑾云,曾宇平,贾旭,等. 中银原油管道改成品油管道混油量的研究[J]. 现代化工,2016,36(5):196-198.
REN J Y,ZENG Y P,JIA X,et a1. Study on the mixture oil ofthe Zhong Yin crude oil pipeline modify the product pipeline[J].
Modern Chemical Industry,2016,36(5):196-198.
[18] 陈世一,崔艳星,崔艳雨. 成品油顺序输送管道混油量计算方法[J]. 油气储运,2007,26(8):16-18.
CHEN S Y,CUI Y X,CUI Y Y. The calculation method ofthe mixed oil volume in multi-product pipeline[J]. Oil & GasStorage and Transportation,2007,26(8):16-18.
[19] 谷俊标. 顺序输送管道不同工况下混油量的计算[J]. 油气田地面工程,2005,24(3):15-17.
GU J B. The calculation of the mixed oil volume in differentoperating condition of multi-product pipeline[J]. Oil-GasfieldSurface Engineering,2005,24(3):15-17.
[20] 周宇,邱姝娟,吴明,等. 成品油顺序输送混油浓度的计算[J].
油气储运,2006,25(9):15-27.
ZHOU Y,QIU S J,WU M,et al. The calculation of the mixedoil concentration in multi-products pipeline[J]. Oil & GasStorage and Transportation,2006,25(9):15-27.
[21] 李欣泽. 成品油管道的混油长度计算方法[J]. 油气储运,2015,34(5):497-499.
LI X Z. Calculation method for length of oil mixtures in productpipelines[J]. Oil & Gas Storage and Transportation,2015,34(5):497-499.
[22] 李会朵,梁静华,朱峰,等. 成品油混油掺混实验与临界比例计算[J]. 油气储运,2011,30(3):180-182.
LI H D,LIANG J H,ZHU F,et al. Mixing experiment andcritical proportion calculation for contamination of products[J].
Oil & Gas Storage and Transportation,2011,30(3):180-182.

相似文献/References:

[1]徐广丽,张国忠,赵仕浩.管道低洼处积水排除实验[J].油气储运,2011,30(05):369.[doi:10.6047/j.issn.1000-8241.2011.05.014]
 Xu Guangli,Zhang Guozhong,Zhao Shihao.An experiment on dewatering for lower location of pipeline[J].Oil & Gas Storage and Transportation,2011,30(10):369.[doi:10.6047/j.issn.1000-8241.2011.05.014]
[2]戴福俊.成品油顺序输送混油的检测与切割[J].油气储运,2011,30(04):255.[doi:10.6047/j.issn.1000-8241.2011.04.004]
 Dai Fujun.Detection and cutting technique of oil contamination in batch transportation process[J].Oil & Gas Storage and Transportation,2011,30(10):255.[doi:10.6047/j.issn.1000-8241.2011.04.004]
[3]张艳彩,李珍,李绍文.成品油管道工程经济的评价问题[J].油气储运,2011,30(07):550.[doi:10.6047/j.issn.1000-8241.2011.07.022]
 Zhang Yancai,Li Zhen,Li Shaowen.Issues of economic assessment in products oil pipeline project[J].Oil & Gas Storage and Transportation,2011,30(10):550.[doi:10.6047/j.issn.1000-8241.2011.07.022]
[4]李会朵,梁静华,朱峰,等.成品油混油掺混实验与临界比例计算[J].油气储运,2011,30(03):180.[doi:10.6047/j.issn.1000-8241.2011.03.006]
 Li Huiduo,Liang Jinghua,Zhu Feng,et al.Mixing experiment and critical proportion calculation for contamination of products[J].Oil & Gas Storage and Transportation,2011,30(10):180.[doi:10.6047/j.issn.1000-8241.2011.03.006]
[5]牛迎战,刘甫,林猛,等.成品油长输管道盗油点抢修方法的应用[J].油气储运,2011,30(02):150.[doi:10.6047/j.issn.1000-8241.2011.02.019]
 Niu Yingzhan,Liu Fu,Lin Meng,et al.Application of the emergency repair method in leak point of products pipeline[J].Oil & Gas Storage and Transportation,2011,30(10):150.[doi:10.6047/j.issn.1000-8241.2011.02.019]
[6]林猛,牛迎战,张玲.EP减阻剂在抚顺-鲅鱼圈成品油管道的应用[J].油气储运,2011,30(05):350.[doi:10.6047/j.issn.1000-8241.2011.05.008]
 Lin Meng,Niu Yingzhan,Zhang Ling.Application of EP DRA in Fushun-Bayuquan Products Pipeline[J].Oil & Gas Storage and Transportation,2011,30(10):350.[doi:10.6047/j.issn.1000-8241.2011.05.008]
[7]宋飞,朱峰,潘红梅,等.兰成渝管道杂质来源分析[J].油气储运,2010,29(5):381.[doi:10.6047/j.issn.1000-8241.2010.05.021]
 Song Fei,Zhu Feng,Pan Hongmei.Analysis on lmpurity Origin of Lanzhou-Chengdu-Chongqing Oil Product Pipeline[J].Oil & Gas Storage and Transportation,2010,29(10):381.[doi:10.6047/j.issn.1000-8241.2010.05.021]
[8]马红娜,李彦娥,武征.成品油管道泄漏的环境风险评价[J].油气储运,2011,30(11):801.[doi:10.6047/j.issn.1000-8241.2011.11.001]
 Ma Hongna,Li Yane,Wu Zheng.Environmental risk evaluation of leaked products pipeline[J].Oil & Gas Storage and Transportation,2011,30(10):801.[doi:10.6047/j.issn.1000-8241.2011.11.001]
[9]殷炳纲.优化成品油管道设计减少混油量[J].油气储运,2011,30(11):834.[doi:10.6047/j.issn.1000-8241.2011.11.010]
 Yin Binggang.Optimizing the design of products pipeline to reduce the contaminated volume[J].Oil & Gas Storage and Transportation,2011,30(10):834.[doi:10.6047/j.issn.1000-8241.2011.11.010]
[10]林猛,牛迎战.管道剩磁产生原因与解决方法[J].油气储运,2011,30(11):878.[doi:10.6047/j.issn.1000-8241.2011.11.023]
 Lin Meng and Niu Yingzhan.Reasons caused residual magnetic flux and solutions for products pipeline[J].Oil & Gas Storage and Transportation,2011,30(10):878.[doi:10.6047/j.issn.1000-8241.2011.11.023]
[11]朱峰,梁静华,李会朵,等.成品油混油切割与掺混试验[J].油气储运,2011,30(05):364.[doi:10.6047/j.issn.1000-8241.2001.05.013]
 Zhu Feng,Liang Jinghua,Li Huiduo,et al.Testing on contamination cut and blending for products[J].Oil & Gas Storage and Transportation,2011,30(10):364.[doi:10.6047/j.issn.1000-8241.2001.05.013]
[12]郭祎,张道全,刘鹏,等.西部成品油管道末站混油切割改进措施[J].油气储运,2011,30(07):520.[doi:10.6047/j.issn.1000-8241.2011.07.011]
 Guo Yi,Zhang Daoquan,Liu Peng,et al.Improvement of mixed oil cutting of Western Oil Product Pipeline Terminal[J].Oil & Gas Storage and Transportation,2011,30(10):520.[doi:10.6047/j.issn.1000-8241.2011.07.011]
[13]徐燕萍,左志恒,徐光春.成品油长输管道的混油下载与切割[J].油气储运,2010,29(7):505.[doi:10.6047/j.issn.1000-8241.2010.07.008]
 Xu Yanping,Zuo Zhiheng,Xu Guangchun.Contamination Unloading and Cutting of Long-distance Oil Product Pipeline[J].Oil & Gas Storage and Transportation,2010,29(10):505.[doi:10.6047/j.issn.1000-8241.2010.07.008]
[14]孙振功,王兰菊.抚鲅线输送+5号柴油与汽油混油切割条件分析[J].油气储运,2005,24(2):12.[doi:10.6047/j.issn.1000-8241.2005.02.004]
 SUN Zhengong,WANG Lanju.Analysis on Contaminated Product Cutting Condition for +5# Diesel and Gasoline Batch Transportation in Fushun--Bayuquan Products Pipeline[J].Oil & Gas Storage and Transportation,2005,24(10):12.[doi:10.6047/j.issn.1000-8241.2005.02.004]
[15]王以家,冯润,王铁成.镇杭成品油管道顺序输送混油的切割与处理[J].油气储运,2002,21(8):5.[doi:10.6047/j.issn.1000-8241.2002.08.002]
 WANG Yijia,FENG Run.Contaminated Products Cut and Blending of Zhenhai Refinery-Hangzhou Kangqiao Products Pipeline[J].Oil & Gas Storage and Transportation,2002,21(10):5.[doi:10.6047/j.issn.1000-8241.2002.08.002]

备注/Memo

作者简介:李雪,女,1988 年生,助理工程师,2014 年硕士毕业于中国石油大学(北京)油气储运工程专业,现主要从事油气储运工艺优化相关研究。地址:辽宁省大连市旅顺口区南开街96 号,116045。电话:0411-56399222,Email:lixue.fshy@sinopec.com

更新日期/Last Update: 2017-10-15