[1]张振永,周亚薇,张金源.现行设计系数对中俄东线OD 1 422 mm 管道的适用性[J].油气储运,2017,36(3):319-324.[doi:10.6047/j.issn.1000-8241.2017.03.014]
 ZHANG Zhenyong,ZHOU Yawei,ZHANG Jinyuan.Applicability of current design coefficient to OD 1 422 mm pipelines in China-Russia East Natural Gas Pipeline[J].Oil & Gas Storage and Transportation,2017,36(3):319-324.[doi:10.6047/j.issn.1000-8241.2017.03.014]
点击复制

现行设计系数对中俄东线OD 1 422 mm 管道的适用性

参考文献/References:

[1] 张宏,顾晓婷,赵丽恒. 基于可靠性的油气管道设计系数研究[J]. 焊管,2011,34(4):58-62. ZHANG H,GU X T,ZHAO L H. Research on design coefficient of oil and gas pipeline based on reliability[J]. Welded Pipe and Tube,2011,34(4):58-62.
[2] ZHANG W W,ZHANG Z Y,ZHANG J Y,et al. Research on reliability-based design technique of China domestic onshore gas pipeline[C]. Guangzhou:ICRMS 2014,2014:1304-1312.
[3] NESSIM M,ZHOU W,ZHOU J,et al. Target reliability levels for design and assessment of onshore natural gas pipelines[J]. Journal of Pressure Vessel Technology,2004,131(6):2501-2512.
[4] ZHANG J Y,ZHANG Z Y,YU Z F,et al. Building a target reliability adaptive to China onshore natural gas pipeline[C]. Calgary:Proceedings of the 10th International Pipeline Conference,2014:IPC2014-33129.
[5] CUNHA S B. Comparison and analysis of pipeline failure statistics[C]. Calgary:Proceedings of the 9th International Pipeline Conference,2012:IPC2012-90186.
[6] ZHANG Z Y,ZHANG W W,ZHANG J Y,et al. Application of reliability-based design method of pipeline material selection[C]. Calgary:Proceedings of the 10th International Pipeline Conference,2014:IPC2014-33038.
[7] ZHOU J,NESSIM M,ROTHWELL B,et al. Development of reliability-based design and assessment standards for onshore natural gas transmission pipelines[J]. Journal of Pressure Vessel Technology,2006,131(3):965-972.
[8] ZHOU W,HUANG G. Model error assessment of burst capacity models for corroded pipes[C]. Calgary:Proceedings of the 9th International Pipeline Conference,2012:IPC2012-90335.
[9] ZHU X K,LEIS B N. Assessment criteria and burst pressure prediction for pipelines with long blunt defects[C]. Calgary: Proceedings of the 9th International Pipeline Conference,2012: IPC2012-90625.
[10] ZHANG S,ZHOU W. An efficient methodology for the reliability analysis of corroding pipelines[C]. Calgary: Proceedings of the 9th International Pipeline Conference,2012: IPC2012-90482.
[11] VALOR A,CALEYO F,HALLEN J M,et al. Reliability assessment of buried pipelines based on different corrosion rate models[J]. Corrosion Science,2013,66(1):78-87.
[12] GIULIANO M. Extension of current defect assessment methods for gouge and corrosion defects in X80 grade pipeline[C]. Calgary:Proceedings of the 10th International Pipeline Conference,2012:IPC2012-90613.
[13] 帅健. 油气管道可靠性的极限状态设计方法[J]. 石油规划设 计,2002,13(1):18-21. SHUAI J. The reliability used limit state design method[J]. Petroleum Planning & Engineering,2002,13(1):18-21.
[14] ZHANG Z Y,JIANG Q M,GUO B. Establishment of limit state equation for buried pipeline corrosion defects[C]. Guangzhou:ICEESE 2015,2015:1815-1821.
[15] ZHANG S,ZHOU W. System reliability of corroding pipelines considering stochastic process-based models for defect growth and internal pressure[J]. International Journal of Pressure Vessels & Piping,2013(6):120-130.
[16] ZHANG J Y,LI C,ZHANG Z Y,et al. Application of reliability-based evaluation technology to natural gas pipelines[C]. Guangzhou:ICEESE 2015,2015:1807-1814.
[17] ZHANG J Y,ZHANG Z Y,ZHOU Y W. Study on impact of steel pipe performance parameters on reliability of oil-gas pipeline[C]. Guangzhou:ICEESE 2015,2015:1791-1800.
[18] ZHANG S,ZHOU W. An efficient methodology for the reliability analysis of corroding pipelines[C]. Calgary: Proceeding of the International Pipeline Conference,2012: IPC2012-90482.
[19] 温凯,张文伟,宫敬,等. 天然气管道可靠性的计算方法[J] 油 气储运,2014,33(7):729-733 WEN K,ZHANG W W,GONG J,et al. Computation of gas pipeline reliability[J]. Oil & Gas Storage and Transportation, 2014,33(7):729-733.
[20] 罗金恒,赵新伟,韩晓毅,等. 西气东输管道可靠度预评估[J]. 焊管,2005,28(3):62-65. LUO J H,ZHAO X W,HAN X Y,et al. Pre evaluation on reliability of West-East Gas Transmission Pipeline[J]. Welded Pipe and Tube,2005,28(3):62-65.

相似文献/References:

[1]张振永,孟献强,孙学军,等.中俄东线站场工艺管道用高钢级低温钢管韧性指标[J].油气储运,2018,37(4):435.[doi:10.6047/j.issn.1000-8241.2018.04.012]
 ZHANG Zhenyong,MENG Xianqiang,SUN Xuejun,et al.Toughness index of low-temperature pipe of high steel grade used for the process pipelines at the station of China-Russia eastern natural gas pipeline[J].Oil & Gas Storage and Transportation,2018,37(3):435.[doi:10.6047/j.issn.1000-8241.2018.04.012]
[2]周亚薇 张振永.中俄东线天然气管道环焊缝断裂韧性设计[J].油气储运,2018,37(预出版):1.
 ZHOU Yawei,ZHANG Zhenyong.The design for the fracture toughness of girth weld in Russia-China Eastern Gas Pipeline[J].Oil & Gas Storage and Transportation,2018,37(3):1.
[3]张振永 周亚薇 张金源.现行设计系数对中俄东线OD 1 422 mm 管道的适用性[J].油气储运,2017,36(预出版):1.
 ZHANG Zhenyong,ZHOU Yawei,ZHANG Jinyuan.Applicability of current design coefficient to OD 1 422mm pipelines in China-Russia East Natural Gas Pipeline[J].Oil & Gas Storage and Transportation,2017,36(3):1.
[4]张振永 张文伟 周亚薇 薄国公.中俄东线OD 1 422 mm 埋地管道的断裂控制设计[J].油气储运,2017,36(预出版):1.
 ZHANG Zhenyong,ZHANG Wenwei,ZHOU Yawei,et al.The fracture control design of the OD 1 422 mm buried pipeline in China-Russia Eastern Gas Pipeline[J].Oil & Gas Storage and Transportation,2017,36(3):1.
[5]张振永,张文伟,周亚薇,等.中俄东线OD 1 422 mm 埋地管道的断裂控制设计[J].油气储运,2017,36(9):1059.[doi:10.6047/j.issn.1000-8241.2017.09.013]
 ZHANG Zhenyong,ZHANG Wenwei,ZHOU Yawei,et al.The fracture control design of the OD 1 422 mm buried pipeline in China-Russia Eastern Gas Pipeline[J].Oil & Gas Storage and Transportation,2017,36(3):1059.[doi:10.6047/j.issn.1000-8241.2017.09.013]
[6]蒲明 李育天 孙骥姝.中俄东线天然气管道工程前期工作关键点及创新成果[J].油气储运,2020,39(04):371.[doi:10.6047/j.issn.1000-8241.2020.04.002]
 PU Ming,LI Yutian,SUN Jishu.The key to the preliminary work of China–Russia Eastern Gas Pipeline Project and innovative achievements[J].Oil & Gas Storage and Transportation,2020,39(3):371.[doi:10.6047/j.issn.1000-8241.2020.04.002]
[7]王振声 陈朋超 王巨洪.中俄东线天然气管道智能化关键技术创新与思考[J].油气储运,2020,39(07):730.[doi:10.6047/j.issn.1000-8241.2020.07.002]
 WANG Zhensheng,CHEN Pengchao,WANG Juhong.Key technological innovations and thinking of pipeline intelligence in China-Russia Eastern Gas Pipeline[J].Oil & Gas Storage and Transportation,2020,39(3):730.[doi:10.6047/j.issn.1000-8241.2020.07.002]
[8]贾韶辉 张新建 李妍 徐杰 陈泮西.油气管道全生命周期数据管理及其在中俄东线的应用[J].油气储运,2020,39(07):756.[doi: 10.6047/j.issn.1000-8241.2020.07.005]
 JIA Shaohui,ZHANG Xinjian,LI Yan,et al.Full life cycle data management of oil and gas pipeline and its application in China-Russia Eastern Gas Pipeline[J].Oil & Gas Storage and Transportation,2020,39(3):756.[doi: 10.6047/j.issn.1000-8241.2020.07.005]
[9]姜昌亮.中俄东线天然气管道工程管理与技术创新[J].油气储运,2020,39(02):121.[doi:10.6047/j.issn.1000-8241.2020.02.001]
 JIANG Changliang.Management and technological innovation in China–Russia Eastern Gas Pipeline Project[J].Oil & Gas Storage and Transportation,2020,39(3):121.[doi:10.6047/j.issn.1000-8241.2020.02.001]
[10]隋永莉 王鹏宇.中俄东线天然气管道黑河—长岭段环焊缝焊接工艺[J].油气储运,2020,39(09):961.[doi:10.6047/j.issn.1000-8241.2020.09.001]
 SUI Yongli,WANG Pengyu.Girth welding technology used in Heihe-Changling Section of China-Russia Eastern Gas Pipeline[J].Oil & Gas Storage and Transportation,2020,39(3):961.[doi:10.6047/j.issn.1000-8241.2020.09.001]
[11]周亚薇,张振永.中俄东线天然气管道环焊缝断裂韧性设计[J].油气储运,2018,37(10):1174.[doi:10.6047/j.issn.1000-8241.2018.10.015]
 ZHOU Yawei,ZHANG Zhenyong.The design for the fracture toughness of girth weld in China-Russia Eastern Gas Pipeline[J].Oil & Gas Storage and Transportation,2018,37(3):1174.[doi:10.6047/j.issn.1000-8241.2018.10.015]

备注/Memo

基金项目:中国石油天然气股份公司“十二· 五”重大科技专项“第 三代大输量天然气管道关键技术研究”,2012E-2801-01。 作者简介:张振永,男,1971 年生,高级工程师,1995 年毕业于中 国石油大学(华东)焊接设备及材料专业,现主要从事油气长输管道 工程设计和管材可靠性评估等工作。地址:河北省廊坊市广阳区 和平路146 号管道设计大厦,065000。电话:0316-2075949,Email: cppe_zhangzy@cnpc.com.cn

更新日期/Last Update: 1900-01-01