PDF下载

[1]肖能阎军卢青针杨志勋岳前进.钢管脐带缆拉伸行为的有限元分析[J].油气储运,2012,31(3):199-202.[doi:10.6047/j.issn.1000-8241.2012.03.012]
　Xiao Neng,Yan Jun,Lu Qingzhen,et al.Finite element analysis for steel tube umbilical cable under axial tension[J].Oil & Gas Storage and Transportation,2012,31(3):199-202.[doi:10.6047/j.issn.1000-8241.2012.03.012]

点击复制

钢管脐带缆拉伸行为的有限元分析

《油气储运》[ISSN:1000-8241/CN:13-1093/TE] 卷: 31 期数: 2012年第3期页码: 199-202 栏目: 出版日期: 2012-03-25

Title:: Finite element analysis for steel tube umbilical cable under axial tension

文章编号:: 1000-8241（2012）03-0199-04

作者:: 肖能阎军卢青针杨志勋岳前进; 大连理工大学运载工程与力学学部? 工业装备结构分析国家重点实验室，辽宁大连 116023

Author(s):: Xiao Neng; Yan Jun; Lu Qingzhen; Yang Zhixun; Yue Qianjin; Dalian University of Technology, Department of Vehicles and Mechanics

关键词:: 脐带缆; 拉伸行为; 有限元; ANSYS; 摩擦

Keywords:: umbilical cable; tension; 3D finite element analysis; ANSYS; friction

分类号:: TE53

DOI:: 10.6047/j.issn.1000-8241.2012.03.012

文献标志码:: A

摘要:: 钢管脐带缆是由多种功能单元螺旋缠绕组成的复合结构，用于连接上部浮式设施与水下生产系统。基于ANSYS 有限元软件，采用梁单元模拟构件，建立钢管脐带缆的三维有限元数值模型，研究受拉伸荷载的脐带缆在自由端可发生扭转和不可发生扭转两种约束条件下的变形行为，并与解析理论解进行对比。在有限元模型中，通过在脐带缆相邻构件之间设置线线接触模拟其相互作用，并通过设置库伦摩擦，弥补解析方法不能考虑构件之间相互接触、摩擦作用的不足，计算效率得到显著提高。有限元方法和解析方法的计算结果吻合很好，验证了有限元数值模型的准确性，为脐带缆其他荷载行为如弯曲、挤压等作用下的变形规律研究奠定了基础。

Abstract:: Steel tube umbilical cable is consisted of multi-functional-unit spirally-wound composite structure, it is used in connecting the facilities and underwater production system. Based on ANSYS software, 3D finite element numerical model is established using beam element simulation components for the purpose of studying the deformation of the cable under tensile load for its free end in the constraint conditions of twist and non-twist, and comparing the research results with the analytical theory solutions. In the finite element model, it can make up the deficiency of the friction between components by imitating interaction which is completed by setting line-line touch in adjacent components of steel tube umbilical cable and setting Coulomb friction. The computation efficiency is improved greatly. The numerical results agree well with the analytical methods and the finite element method lays the foundation for the deformation law research on other steel tube umbilical cable under bending, squeezing, et al.

参考文献/References:

[1] Costello G A，Philips J W. Effective modulus of twisted wire cables[J]. ASCE Journal of the Engineering Mechanics Division，
1976，102：171-181.
[2] Love A E H. A treatise on the mathematical theory of elasticity[M].New York：Dover Publications，1944：345-358.
[3] Velinsky S A，Anderson G L，Costello G A. Wire rope with complex cross-sections[J].ASCE Journal of the Engineering
Mechanics Division，1984，110： 380-391.
[4] McConnell K G，Zemke W P. A model to predict the coupled axial torsion properties of ACSR electrical conductors[J].Experimental
Mechanics，1982，22（7）：237-244.
[5] Custodio A B，Vaz M A.A nonlinear formulation for the axisymmetric response of umbilical cables and flexible pipes[J].
Applied Ocean Research，2002，24：21-29.
[6] Knapp R H. Derivation of a new stiffness matrix for helically armoured cables considering tension and torsion[J].International
Journal for Numerical Methods in Engineering，1979，14：515-529.
[7] Slotboom O F. Simplified estimation of helically steel armored cable elongation，diameter reduction and rotation[C].Proceeding
of Oceans 95 MT-S/IEEE Conference，San Diego，CA，October，2005：126-137.
[8] Svein Savik，Knut I，Ekeberg. Non-linear stress analysis of complex umbilical cross-sections[C].OMAE，Oslo，Norway，
No.28126，2002.
[9] Ian Probyn，Alan Dobson，Michael Martinez.Advances in 3-D FEA techniques for metallic tube umbilical[C].ISOPE，Lisbon，
Portugal，2007：848-854.
[10] Vincent Le Corre，Ian Probyn.Validation of a 3-dimensional finite element analysis model of a deep water steel tube umbilical
in combined tension and cyclic bending[C].OMAE，Honolulu，USA，No.79168，2009.

备注/Memo

?国家863 计划资助项目“水下生产系统脐带缆结构设计的软件开发及实验研究”，2009AA09Z301-2；国家自然科学基金资
助项目“基于点阵材料微观临界应力的几何多尺度拓扑优化方法研究”，10902018
作者简介：肖能，助理工程师，1986 年生，2011 年硕士毕业于大连理工大学力学专业，现主要从事海洋柔性立管和脐带缆的设计、分
析和实验研究。电话：13795146687；Email： yanjun@dlut.edu.cn

更新日期/Last Update: