[1]林猛,牛迎战.管道剩磁产生原因与解决方法[J].油气储运,2011,30(11):878-879.[doi:10.6047/j.issn.1000-8241.2011.11.023]
 Lin Meng and Niu Yingzhan.Reasons caused residual magnetic flux and solutions for products pipeline[J].Oil & Gas Storage and Transportation,2011,30(11):878-879.[doi:10.6047/j.issn.1000-8241.2011.11.023]
点击复制

管道剩磁产生原因与解决方法

参考文献/References:

[1] 谢应璞. 电机学[M]. 成都:四川大学出版社,2007:2-3.
[2] 李建军. 管道焊接技术[M]. 北京:石油工业出版社,2007:51-57.
[3] 张文明,焦万才,刘兆甲. 焊条电弧焊[M]. 沈阳:辽宁科学技术出版社,2007:7-9.

相似文献/References:

[1]徐广丽,张国忠,赵仕浩.管道低洼处积水排除实验[J].油气储运,2011,30(05):369.[doi:10.6047/j.issn.1000-8241.2011.05.014]
 Xu Guangli,Zhang Guozhong,Zhao Shihao.An experiment on dewatering for lower location of pipeline[J].Oil & Gas Storage and Transportation,2011,30(11):369.[doi:10.6047/j.issn.1000-8241.2011.05.014]
[2]戴福俊.成品油顺序输送混油的检测与切割[J].油气储运,2011,30(04):255.[doi:10.6047/j.issn.1000-8241.2011.04.004]
 Dai Fujun.Detection and cutting technique of oil contamination in batch transportation process[J].Oil & Gas Storage and Transportation,2011,30(11):255.[doi:10.6047/j.issn.1000-8241.2011.04.004]
[3]郭祎,张道全,刘鹏,等.西部成品油管道末站混油切割改进措施[J].油气储运,2011,30(07):520.[doi:10.6047/j.issn.1000-8241.2011.07.011]
 Guo Yi,Zhang Daoquan,Liu Peng,et al.Improvement of mixed oil cutting of Western Oil Product Pipeline Terminal[J].Oil & Gas Storage and Transportation,2011,30(11):520.[doi:10.6047/j.issn.1000-8241.2011.07.011]
[4]张艳彩,李珍,李绍文.成品油管道工程经济的评价问题[J].油气储运,2011,30(07):550.[doi:10.6047/j.issn.1000-8241.2011.07.022]
 Zhang Yancai,Li Zhen,Li Shaowen.Issues of economic assessment in products oil pipeline project[J].Oil & Gas Storage and Transportation,2011,30(11):550.[doi:10.6047/j.issn.1000-8241.2011.07.022]
[5]李会朵,梁静华,朱峰,等.成品油混油掺混实验与临界比例计算[J].油气储运,2011,30(03):180.[doi:10.6047/j.issn.1000-8241.2011.03.006]
 Li Huiduo,Liang Jinghua,Zhu Feng,et al.Mixing experiment and critical proportion calculation for contamination of products[J].Oil & Gas Storage and Transportation,2011,30(11):180.[doi:10.6047/j.issn.1000-8241.2011.03.006]
[6]牛迎战,刘甫,林猛,等.成品油长输管道盗油点抢修方法的应用[J].油气储运,2011,30(02):150.[doi:10.6047/j.issn.1000-8241.2011.02.019]
 Niu Yingzhan,Liu Fu,Lin Meng,et al.Application of the emergency repair method in leak point of products pipeline[J].Oil & Gas Storage and Transportation,2011,30(11):150.[doi:10.6047/j.issn.1000-8241.2011.02.019]
[7]林猛,牛迎战,张玲.EP减阻剂在抚顺-鲅鱼圈成品油管道的应用[J].油气储运,2011,30(05):350.[doi:10.6047/j.issn.1000-8241.2011.05.008]
 Lin Meng,Niu Yingzhan,Zhang Ling.Application of EP DRA in Fushun-Bayuquan Products Pipeline[J].Oil & Gas Storage and Transportation,2011,30(11):350.[doi:10.6047/j.issn.1000-8241.2011.05.008]
[8]朱峰,梁静华,李会朵,等.成品油混油切割与掺混试验[J].油气储运,2011,30(05):364.[doi:10.6047/j.issn.1000-8241.2001.05.013]
 Zhu Feng,Liang Jinghua,Li Huiduo,et al.Testing on contamination cut and blending for products[J].Oil & Gas Storage and Transportation,2011,30(11):364.[doi:10.6047/j.issn.1000-8241.2001.05.013]
[9]宋飞,朱峰,潘红梅,等.兰成渝管道杂质来源分析[J].油气储运,2010,29(5):381.[doi:10.6047/j.issn.1000-8241.2010.05.021]
 Song Fei,Zhu Feng,Pan Hongmei.Analysis on lmpurity Origin of Lanzhou-Chengdu-Chongqing Oil Product Pipeline[J].Oil & Gas Storage and Transportation,2010,29(11):381.[doi:10.6047/j.issn.1000-8241.2010.05.021]
[10]马红娜,李彦娥,武征.成品油管道泄漏的环境风险评价[J].油气储运,2011,30(11):801.[doi:10.6047/j.issn.1000-8241.2011.11.001]
 Ma Hongna,Li Yane,Wu Zheng.Environmental risk evaluation of leaked products pipeline[J].Oil & Gas Storage and Transportation,2011,30(11):801.[doi:10.6047/j.issn.1000-8241.2011.11.001]

备注/Memo

林猛,在读硕士生,1974 年生,1996 年毕业于辽宁工学院机械制造专业,现主要从事设备的技术管理工作。
电话:0413-6520142;Email:cygslm@petrochina.com.cn(收稿日期:2011-01-13)

更新日期/Last Update: