甬沪宁管道添加减阻剂增输试验

相似文献/References:

[1]戴福俊.成品油顺序输送混油的检测与切割[J].油气储运,2011,30(04):255.[doi:10.6047/j.issn.1000-8241.2011.04.004]
　Dai Fujun.Detection and cutting technique of oil contamination in batch transportation process[J].Oil & Gas Storage and Transportation,2011,30(10):255.[doi:10.6047/j.issn.1000-8241.2011.04.004]
[2]苗青,衣桂影,徐波,等.中国－朝鲜原油管道中方段流动安全性评价[J].油气储运,2011,30(04):252.[doi:10.6047/j.issn.1000-8241.2011.04.003]
　Miao Qing,Yi Guiying,Xu Bo,et al.Flow safety evaluation for China section of China-North Korea Crude Oil Pipeline[J].Oil & Gas Storage and Transportation,2011,30(10):252.[doi:10.6047/j.issn.1000-8241.2011.04.003]
[3]黄启玉,何莎莎.蜡沉积层冲刷实验[J].油气储运,2011,30(04):312.[doi:10.6047/j.issn.1000-8241.2011.04.021]
　Huang Qiyu and He Shasha.Scouring test of wax deposition layer[J].Oil & Gas Storage and Transportation,2011,30(10):312.[doi:10.6047/j.issn.1000-8241.2011.04.021]
[4]张绚,肖刚,齐文远,等.降凝剂在克拉玛依－独山子原油管道的应用[J].油气储运,2011,30(01):49.[doi:10.6047/j.issn.1000-8241.2011.01.013]
　Zhang Xuan,Xiao Gang,Qi Wenyuan,et al.The application of pour point depressant in Karamay-Dushanzi Crude Oil Pipeline[J].Oil & Gas Storage and Transportation,2011,30(10):49.[doi:10.6047/j.issn.1000-8241.2011.01.013]
[5]曹明,曹旦夫,吴杰,等.BEM-JN 油基降粘剂作用机理与应用试验[J].油气储运,2011,30(01):53.[doi:10.6047/j.issn.1000-8241.2011.01.014]
　Cao Ming,Cao Danfu,Wu Jie,et al.Mechanism and performance experiment of oil-based BEM-JN viscosity depressant[J].Oil & Gas Storage and Transportation,2011,30(10):53.[doi:10.6047/j.issn.1000-8241.2011.01.014]
[6]方爱国,薛海鸿.三塘湖原油管道水击保护措施[J].油气储运,2011,30(06):465.[doi:10.6047/j.issn.1000-8241.2011.06.017]
　Fang Aiguo and Xue Haihong.Measures in surge control in Santanghu Oil Pipeline[J].Oil & Gas Storage and Transportation,2011,30(10):465.[doi:10.6047/j.issn.1000-8241.2011.06.017]
[7]李会朵,梁静华,朱峰,等.成品油混油掺混实验与临界比例计算[J].油气储运,2011,30(03):180.[doi:10.6047/j.issn.1000-8241.2011.03.006]
　Li Huiduo,Liang Jinghua,Zhu Feng,et al.Mixing experiment and critical proportion calculation for contamination of products[J].Oil & Gas Storage and Transportation,2011,30(10):180.[doi:10.6047/j.issn.1000-8241.2011.03.006]
[8]张伟,刘乔,曲岩,等.热油管道总体工艺方案设计与软件开发[J].油气储运,2011,30(05):385.[doi:10.6047/j.issn.1000-8241.2011.05.018]
　Zhang Wei,Liu Qiao,Qu Yan,et al.Design and software development of total technology scheme for hot oil pipeline[J].Oil & Gas Storage and Transportation,2011,30(10):385.[doi:10.6047/j.issn.1000-8241.2011.05.018]
[9]朱峰,梁静华,李会朵,等.成品油混油切割与掺混试验[J].油气储运,2011,30(05):364.[doi:10.6047/j.issn.1000-8241.2001.05.013]
　Zhu Feng,Liang Jinghua,Li Huiduo,et al.Testing on contamination cut and blending for products[J].Oil & Gas Storage and Transportation,2011,30(10):364.[doi:10.6047/j.issn.1000-8241.2001.05.013]
[10]胡森,周广,苗青,等.东部原油管网能耗问题分析[J].油气储运,2010,29(5):395.[doi:10.6047/j.issn.1000-8241.2010.05.026]
　Hu Sen,ZhouGuang,Miao Qing.Energy Consumption Analysis on Eastern Oil Pipeline Network[J].Oil & Gas Storage and Transportation,2010,29(10):395.[doi:10.6047/j.issn.1000-8241.2010.05.026]
[11]鹿钦礼,杜明俊,马贵阳,等.变径管道对冷热原油顺序输送混油的影响[J].油气储运,2011,30(03):183.[doi:10.6047/j.issn.1000-8241.2011.03.007]
　Lu Qinli,Du Mingjun,Ma Guiyang,et al.nfluence of reduced pipeline on the batch transportation of cold-hot contaminated crude oil[J].Oil & Gas Storage and Transportation,2011,30(10):183.[doi:10.6047/j.issn.1000-8241.2011.03.007]
[12]张争伟,凌霄,王凯,等.同沟敷设中成品油管道对原油管道顺序输送的热力影响[J].油气储运,2008,27(6):10.[doi:10.6047/j.issn.1000-8241.2008.06.003]
　ZHANG Zhengwei,LING Xiao.Thermal Impact of the Product Pipeline on the Oil Temperature of the Crude Pipeline Laid in the Same Ditch in Batch Transportation[J].Oil & Gas Storage and Transportation,2008,27(10):10.[doi:10.6047/j.issn.1000-8241.2008.06.003]
[13]尚凤山.原油管道的顺序输送[J].油气储运,2004,23(1):9.[doi:10.6047/j.issn.1000-8241.2004.01.003]
　SHANG Fengshan.Batch Transportation of Crude Oil[J].Oil & Gas Storage and Transportation,2004,23(10):9.[doi:10.6047/j.issn.1000-8241.2004.01.003]
[14]慕希茂,郭跃平,李保国,等.顺序输送停输时的混油量计算[J].油气储运,2001,20(9):30.[doi:10.6047/j.issn.1000-8241.2001.09.007]
　Mu Ximao,Guo Yueping.Calculation on Contaminated Volume for Shutdown Oil Pipeline[J].Oil & Gas Storage and Transportation,2001,20(10):30.[doi:10.6047/j.issn.1000-8241.2001.09.007]
[15]梁翕章.成品油管道与原油管道的差异[J].油气储运,1995,14(4):8.[doi:10.6047/j.issn.1000-8241.1995.04.002]
　Liang Xizhang.The Differences between Products and Crude Oil Pipelines[J].Oil & Gas Storage and Transportation,1995,14(10):8.[doi:10.6047/j.issn.1000-8241.1995.04.002]
[16]王凯 张劲军 宇波.原油管道差温顺序输送水力-热力耦合计算模型[J].油气储运,2013,32(2):143.[doi:10.6047/j.issn.1000-8241.2013.02.007]
　Wang Kai,Zhang Jinjun,et al. Hydraulic-thermal coupled model of different temperature batch transportation of crude oil pipeline[J].Oil & Gas Storage and Transportation,2013,32(10):143.[doi:10.6047/j.issn.1000-8241.2013.02.007]
[17]吕梦芸.基于模拟退火-蚁群算法的原油管道顺序输送运行优化模型[J].油气储运,2017,36(10):1154.[doi:10.6047/j.issn.1000-8241.2017.10.009]
　LYU Mengyun.The operation optimization model of crude oil batch transportation pipeline based on the simulated annealing-ant colony algorithm[J].Oil & Gas Storage and Transportation,2017,36(10):1154.[doi:10.6047/j.issn.1000-8241.2017.10.009]
[18]肖文涛,李雪,刘刚,等.大批量原油顺序管输流量可视化优化方法[J].油气储运,2018,37(4):390.[doi:10.6047/j.issn.1000-8241.2018.04.005]
　XIAO Wentao,LI Xue,LIU Gang,et al.A visual optimization method on the flow rate of batch transportation of mass crude oil[J].Oil & Gas Storage and Transportation,2018,37(10):390.[doi:10.6047/j.issn.1000-8241.2018.04.005]