PDF下载/HTML
[1]李睿,侯宇,刘淑聪,等.锚纹特征对管道外防腐环氧涂层附着力的影响[J].油气储运,2011,30(05):355-358.[doi:10.6047/j.issn.1000-8241.2011.05.010]
　Li Rui,Hou Yu,Li Jingmiao,et al.Impact of pattern on the adhesion of pipe external epoxy coating[J].Oil & Gas Storage and Transportation,2011,30(05):355-358.[doi:10.6047/j.issn.1000-8241.2011.05.010]
点击复制

锚纹特征对管道外防腐环氧涂层附着力的影响

《油气储运》[ISSN:1000-8241/CN:13-1093/TE] 卷: 30 期数: 2011年05期 页码: 355-358 栏目: 出版日期: 2011-05-25
Title:
Impact of pattern on the adhesion of pipe external epoxy coating
文章编号:
1000-8241(2011)05-0355-04
作者:
李睿1; 侯宇1; 刘淑聪2; 李晶淼1; 陈晶3; 赵吉诗1; 刘玲莉1
1.中国石油管道科技研究中心，河北廊坊 065000；2.防灾科技学院，河北三河 065201；3.中国民航大学，天津 300300
Author(s):
Li Rui;  Hou Yu;  Li Jingmiao;  et al
PetroChina Pipeline R&D Center， Langfang， Hebei， 065000.
关键词:
管道; 防腐; 环氧涂层; 表面处理; 锚纹特征; 附着力
Keywords:
pipe; corrosion control; epoxy coating; surface preparation; pattern characteristic; adhesion
分类号:
TE832
DOI:
10.6047/j.issn.1000-8241.2011.05.010
文献标志码:
A
摘要:
在长输油气管道的防腐作业过程中，管体表面处理质量对管体表面涂层附着力起着非常重要的作用，而锚纹特征是影响管体表面处理质量的重要因素之一。根据 GB/T 5210－2006 对不同锚纹特征进行环氧涂层附着力的测试，得到了涂层附着力的相关数据。根据实验数据，分别得出了表面粗糙度、锚纹微观不平度间距、锚纹深度和环氧涂层附着力之间的关系。对实验数据进行拟合，得出了不同特征的锚纹与环氧涂层附着力的关系式和图形。通过对实验结果的分析，得到了在进行管体表面除锈处理时使涂层与基体的结合效果最佳的锚纹特征，即基体的表面粗糙度Ra在 4～6 μm 之间，锚纹深度Rz保持在 30～45 μm 之间。
Abstract:
In ChineseIn the corrosion control of long-distance oil & gas pipeline，the surface preparation quality of pipe has an important impact on the adhesion of coating，while the pattern is one of the most important factors. Based on GB/T 5210－2006，the adhesion testing data for different patterns are obtained. By analyzing the data， the relationship between the pipe surface roughness，microcosmic unevenness gap，pattern depth and the coating’s adhesion is acquired. Fitting the data，the curves and formulations between pattern and the adhesion are established. By analyzing the experiment result，the optimum pattern is determined，i.e.，the surface roughness Ra is 4~6 μm，the pattern depth Rz remains at 30~45 μm.

参考文献/References:

[1 ] 杨晖，潘少明.基体表面粗糙度对涂层结合强度的影响[J].金属铸锻焊技术，2008（8）：118-121.
[2] 时秀伟，崔超.埋地管道防腐层表面处理质量的影响因素[J].涂装和电镀，2009（8）：25-27.
[3 ] 郑国娟.GB/T 5210－2006 色漆和清漆拉开法附着力试验[S].北京：中国标准出版社，2007.
[4 ] 洪栋煌，刘盘兴，鲁先庚，等.GB/T 8923－2008 涂装前钢材表面锈蚀等级和除锈等级[S].北京：中国标准出版社，2008.
[5?] 张瑛，许传新，权忠舆，等.SY/T0315－2005 钢质管道单层熔结环氧粉末外涂层技术规范[S].北京：石油工业出版社，2005.
[6 ] 张振远，张子起，肖利明，等.SY/T0066－1999 钢管防腐层厚度的无损测量方法（磁性法）[S].北京：石油工业出版社，1999.
[7 ] 韩[树强，刘泽年，刘军，等.不同表面处理方法对环氧胶粘涂层剪切强度影响[J].辽宁石油化工大学学报，2009，29（3）：55-57.
[8 ] 刘志文，刘敬福，李赫亮，等.表面处理对环氧胶粘涂层剪切强度的影响[J].表面技术，2002，31（3）：12-13.

相似文献/References:

[1]滕延平,蔡培培,徐承伟,等.应用同步监测法定位管道杂散电流的干扰源[J].油气储运,2011,30(05):347.[doi:10.6047/j.issn.1000-8241.2011.05.007]
　Teng Yanping,Cai Peipei,Xu Chengwei,et al.Applying synchronous monitoring method to locate interference sources of stray current in pipeline[J].Oil & Gas Storage and Transportation,2011,30(05):347.[doi:10.6047/j.issn.1000-8241.2011.05.007]
[2]段纪淼,宫敬,张宇,等.多相混输管道蜡沉积研究进展[J].油气储运,2011,30(04):241.[doi:10.6047/j.issn.1000-8241.2011.04.001]
　Duan Jimiao,Gong Jing,Zhang Yu,et al.Research progress of wax deposition in multiphase mixed transmission pipeline[J].Oil & Gas Storage and Transportation,2011,30(05):241.[doi:10.6047/j.issn.1000-8241.2011.04.001]
[3]薛光,袁献忠,张继亮.基于完整性管理的川气东送数字化管道系统[J].油气储运,2011,30(04):266.[doi:10.6047/j.issn.1000-8241.2011.04.007]
　Xue Guang,Yuan Xianzhong,Zhang Jiliang.Integrity management-based digitalization system of Sichuan Gas-to-East Transmission Pipeline[J].Oil & Gas Storage and Transportation,2011,30(05):266.[doi:10.6047/j.issn.1000-8241.2011.04.007]
[4]宋晓琴,刘广文,王雯娟.管道油品泄漏原因及其对环境的影响[J].油气储运,2011,30(04):297.[doi:10.6047/j.issn.1000-8241.2011.04.016]
　Song Xiaoqin,Liu Guangwen,Wang Wenjuan. The influence of oil pipeline leakage on environmental pollution [J].Oil & Gas Storage and Transportation,2011,30(05):297.[doi:10.6047/j.issn.1000-8241.2011.04.016]
[5]蔡亮学,何利民,吕宇玲,等.水平定向钻管道穿越孔底泥浆的力学特性[J].油气储运,2011,30(01):25.[doi:10.6047/j.issn.1000-8241.2011.01.007]
　Cai Liangxue,He Limin,Lv Yuling,et al.Hole-bottom slurry mechanical properties of horizontal directional drilling in pipeline crossing project[J].Oil & Gas Storage and Transportation,2011,30(05):25.[doi:10.6047/j.issn.1000-8241.2011.01.007]
[6]彭忍社,杨鲁明,屠明刚.天然气分输站场带冷凝水管道的防腐[J].油气储运,2011,30(01):41.[doi:10.6047/j.issn.1000-8241.2011.01.011]
　Peng Renshe,Yang Luming,Tu Minggang.Corrosion control on the pipeline contained condensation water in natural gas offtake station[J].Oil & Gas Storage and Transportation,2011,30(05):41.[doi:10.6047/j.issn.1000-8241.2011.01.011]
[7]樊三新,刘玉玲,楚威威.高寒地区管道低温水试压方法[J].油气储运,2011,30(01):73.[doi:10.6047/j.issn.1000-8241.2011.01.020]
　Fan Sanxin,Liu Yuling,Chu Weiwei.Pipeline hydrotest method of cold water in frigid zone[J].Oil & Gas Storage and Transportation,2011,30(05):73.[doi:10.6047/j.issn.1000-8241.2011.01.020]
[8]杜明俊,张振庭,张朝阳,等.多相混输管道90°弯管冲蚀破坏应力分析[J].油气储运,2011,30(06):427.[doi:10.6047/j.issn.1000-8241.2011.06.006]
　Du Mingjun,Chao Ling,Fu Xiaodong,et al.Analysis of erosion fracture stress of 90° elbow in multi-phase mixed transmission pipeline[J].Oil & Gas Storage and Transportation,2011,30(05):427.[doi:10.6047/j.issn.1000-8241.2011.06.006]
[9]罗金恒,杨锋平,马秋荣,等.新建大落差管道试压排水爆管原因分析[J].油气储运,2011,30(06):441.[doi:10.6047/j.issn.1000-8241.2011.06.010]
　Luo Jinheng,Yang Fengping,Ma Qiurong,et al.Reason analysis on pipe fracture in hydrotest during water draining for a newly-built pipeline with great fall[J].Oil & Gas Storage and Transportation,2011,30(05):441.[doi:10.6047/j.issn.1000-8241.2011.06.010]
[10]高河东,祁志江,任金岭,等.川气东送管道野三河跨越方案比选与实施[J].油气储运,2011,30(06):445.[doi:10.6047/j.issn.1000-8241.2011.06.011]
　Gao Hedong,Qi Zhijiang,Ren Jinling,et al.Programs comparison and construction of the Yesanhe River Overhead Crossing NG Project of Sichuan-to-East Gas Pipeline[J].Oil & Gas Storage and Transportation,2011,30(05):445.[doi:10.6047/j.issn.1000-8241.2011.06.011]
[11]徐昌学　马厚逢.管道防腐作业工艺参数及其算法[J].油气储运,2012,31(5):379.[doi:10.6047/j.issn.1000-8241.2012.05.015]
　Xu Changxue and Ma Houfeng.Technological parameters and calculation in anti-corrosion operation of pipeline[J].Oil & Gas Storage and Transportation,2012,31(05):379.[doi:10.6047/j.issn.1000-8241.2012.05.015]
[12]乔军平,张嗣伋,张永宏,等.油气管道防腐保温一次成型新工艺[J].油气储运,2006,25(4):38.[doi:10.6047/j.issn.1000-8241.2006.04.010]
　QIAO Junping,ZHANG Siji.The Method of Once-step Moulding Used in Manufacturing of Pipeline Coating[J].Oil & Gas Storage and Transportation,2006,25(05):38.[doi:10.6047/j.issn.1000-8241.2006.04.010]
[13]葛国防.管道内涂层经济可行性分析[J].油气储运,2003,22(2):54.[doi:10.6047/j.issn.1000-8241.2003.02.014]
　GE Guofang.Economy and Feasibility Analysis on Internal Coating of Pipeline[J].Oil & Gas Storage and Transportation,2003,22(05):54.[doi:10.6047/j.issn.1000-8241.2003.02.014]
[14]何英勇,杨鼎文.管道内喷涂防腐技术的应用[J].油气储运,1999,18(4):30.[doi:10.6047/j.issn.1000-8241.1999.04.008]
　He Yingyong,Yang Dingwen.Pipeline Coating Spraying Technique[J].Oil & Gas Storage and Transportation,1999,18(05):30.[doi:10.6047/j.issn.1000-8241.1999.04.008]
[15]姜炳卫.管道塑膜管内衬施工方法[J].油气储运,1998,17(8):23.[doi:10.6047/j.issn.1000-8241.1998.08.008]
　Jiang Bingwei.Installation method of pipeline plastic film inner lining[J].Oil & Gas Storage and Transportation,1998,17(05):23.[doi:10.6047/j.issn.1000-8241.1998.08.008]
[16]尹国耀,龚胜起,卢效顺.管道三层PE防腐技术及设备[J].油气储运,1998,17(3):20.[doi:10.6047/j.issn.1000-8241.1998.03.007]
　Yin Guoyao,Gong Shengqi.Pipeline three-layer PE corrosion protection technology and equipment[J].Oil & Gas Storage and Transportation,1998,17(05):20.[doi:10.6047/j.issn.1000-8241.1998.03.007]
[17]罗富绪.环氧树脂/煤焦油瓷漆管道防腐新工艺[J].油气储运,1997,16(12):59.[doi:10.6047/j.issn.1000-8241.1997.12.018]
　Luo Fuxu.Epoxy Resin and Coal Tar Enamel Coatings Used in the Corrosion Control of Pipeline[J].Oil & Gas Storage and Transportation,1997,16(05):59.[doi:10.6047/j.issn.1000-8241.1997.12.018]
[18]马书定,王学善.管道内防腐现场双球挤涂新工艺[J].油气储运,1997,16(6):28.[doi:10.6047/j.issn.1000-8241.1997.06.009]
　Ma Shuding,Wang Xueshan.A New Process for the Application of Internal Insitu Pipeline Coating with Double-Pig[J].Oil & Gas Storage and Transportation,1997,16(05):28.[doi:10.6047/j.issn.1000-8241.1997.06.009]
[19]白淑媛.涂塑钢的耐蚀性能及其应用[J].油气储运,1997,16(2):31.[doi:10.6047/j.issn.1000-8241.1997.02.011]
　Bai Shuyuan.The Corrosion Resistance of Clad Steel and its Application[J].Oil & Gas Storage and Transportation,1997,16(05):31.[doi:10.6047/j.issn.1000-8241.1997.02.011]
[20]马书定.聚乙烯管套接衬里新工艺[J].油气储运,1996,15(12):27.[doi:10.6047/j.issn.1000-8241.1996.12.008]
　Ma Shuding.A New Technology for Liner Insertion of PE Plastic Pipe[J].Oil & Gas Storage and Transportation,1996,15(05):27.[doi:10.6047/j.issn.1000-8241.1996.12.008]

备注/Memo

李睿，助理工程师，1983 年生，2009 年硕士毕业于吉林大学精密仪器与机械设计专业，现主要从事管道防腐和节能技术的研究工作。
电话：15003162325；Email：kjlirui@petrochina.com.cn（收稿日期：2010-11-04）

更新日期/Last Update: