版权所有@2014 《油气储运》杂志社 冀ICP备号:0000000
地址:河北省廊坊市金光道51号(065000);电话:0316-2177193 / 0316-2176753; 传真:0316-2177392; 网址:yqcy.paperonce.org
技术支持:西安三才科技实业有限公司 029-89381847;029-88222991
The formation and variation laws of oil contamination in batch transportation of products oil pipeline are analyzed. The condition for using vibrating densitometer to do inline detection,cutting,and installation is discussed.The existed problems in density inspection system itself and pipeline running are summarized as follows:filter clogging, slug entering into magnetic pump,no pressure compensation,open air setting and the technical causes that the density data from different stations can not be properly compared and inline sampling in different stations are varied. In order to effectively monitor and control the oil contamination volume and increase quality during batch transportation and oil unloading,the technical measures for improving the density inspection system are proposed. The formation and variation laws of oil contamination in batch transportation of products oil pipeline are analyzed. The condition for using vibrating densitometer to do inline detection,cutting,and installation is discussed. The existed problems in density inspection system itself and pipeline running are summarized as follows: filter clogging,slug entering into magnetic pump,no pressure compensation,open air setting and the technical causes that the density data from different stations can not be properly compared and inline sampling in different stations are varied. In order to effectively monitor and control the oil contamination volume and increase quality during batch transportation and oil unloading,the technical measures for improving the density inspection system are proposed.
?
[1]?曾多礼,邓松圣.成品油管道输送技术[M].北京:石油工业出版社,2002:120-124.
[2] 卢里耶M B.成品油顺序输送最优化[M].北京:石油工业出版社,1989:69-73.
[3] 严大凡.输油管道设计与管理[M].北京:石油工业出版社,1986:241-242,253.
[1]林猛,牛迎战,张玲.EP减阻剂在抚顺-鲅鱼圈成品油管道的应用[J].油气储运,2011,30(05):350.[doi:10.6047/j.issn.1000-8241.2011.05.008]
Lin Meng,Niu Yingzhan,Zhang Ling.Application of EP DRA in Fushun-Bayuquan Products Pipeline[J].Oil & Gas Storage and Transportation,2011,30(04):350.[doi:10.6047/j.issn.1000-8241.2011.05.008]
[2]徐广丽,张国忠,赵仕浩.管道低洼处积水排除实验[J].油气储运,2011,30(05):369.[doi:10.6047/j.issn.1000-8241.2011.05.014]
Xu Guangli,Zhang Guozhong,Zhao Shihao.An experiment on dewatering for lower location of pipeline[J].Oil & Gas Storage and Transportation,2011,30(04):369.[doi:10.6047/j.issn.1000-8241.2011.05.014]
[3]夏于飞,史占华,陈亚军.卵石层地质条件下定向钻穿越工艺与设备优化[J].油气储运,2011,30(04):269.[doi:10.6047/j.issn.1000-8241.2011.04.008]
Xia Yufei,Shi Zhanhua,Chen Yajun.Directional drilling crossing technology in pebble bed geology and equipment optimization[J].Oil & Gas Storage and Transportation,2011,30(04):269.[doi:10.6047/j.issn.1000-8241.2011.04.008]
[4]郭祎,张道全,刘鹏,等.西部成品油管道末站混油切割改进措施[J].油气储运,2011,30(07):520.[doi:10.6047/j.issn.1000-8241.2011.07.011]
Guo Yi,Zhang Daoquan,Liu Peng,et al.Improvement of mixed oil cutting of Western Oil Product Pipeline Terminal[J].Oil & Gas Storage and Transportation,2011,30(04):520.[doi:10.6047/j.issn.1000-8241.2011.07.011]
[5]张艳彩,李珍,李绍文.成品油管道工程经济的评价问题[J].油气储运,2011,30(07):550.[doi:10.6047/j.issn.1000-8241.2011.07.022]
Zhang Yancai,Li Zhen,Li Shaowen.Issues of economic assessment in products oil pipeline project[J].Oil & Gas Storage and Transportation,2011,30(04):550.[doi:10.6047/j.issn.1000-8241.2011.07.022]
[6]马国光,刘苏,林辉,等.油气回收装置在油库混油处理中的应用[J].油气储运,2011,30(06):478.[doi:10.6047/j.issn.1000-8241.2011.06.023]
Ma Guoguang,Liu Su,Lin Hui,et al.Application of oil contamination recovery unit of tankfarm[J].Oil & Gas Storage and Transportation,2011,30(04):478.[doi:10.6047/j.issn.1000-8241.2011.06.023]
[7]鹿钦礼,杜明俊,马贵阳,等.变径管道对冷热原油顺序输送混油的影响[J].油气储运,2011,30(03):183.[doi:10.6047/j.issn.1000-8241.2011.03.007]
Lu Qinli,Du Mingjun,Ma Guiyang,et al.nfluence of reduced pipeline on the batch transportation of cold-hot contaminated crude oil[J].Oil & Gas Storage and Transportation,2011,30(04):183.[doi:10.6047/j.issn.1000-8241.2011.03.007]
[8]牛迎战,刘甫,林猛,等.成品油长输管道盗油点抢修方法的应用[J].油气储运,2011,30(02):150.[doi:10.6047/j.issn.1000-8241.2011.02.019]
Niu Yingzhan,Liu Fu,Lin Meng,et al.Application of the emergency repair method in leak point of products pipeline[J].Oil & Gas Storage and Transportation,2011,30(04):150.[doi:10.6047/j.issn.1000-8241.2011.02.019]
[9]成旭霞,林森,张宁,等.甬沪宁管道添加减阻剂增输试验[J].油气储运,2011,30(10):764.[doi:10.6047/j.issn.1000-8241.2011.10.014]
Chen Xuxia,Lin Seng,Zhang Ning,et al.Throughput increasing experiment on YongHuNing Oil Pipeline by drag reduction agent injection[J].Oil & Gas Storage and Transportation,2011,30(04):764.[doi:10.6047/j.issn.1000-8241.2011.10.014]
[10]马红娜,李彦娥,武征.成品油管道泄漏的环境风险评价[J].油气储运,2011,30(11):801.[doi:10.6047/j.issn.1000-8241.2011.11.001]
Ma Hongna,Li Yane,Wu Zheng.Environmental risk evaluation of leaked products pipeline[J].Oil & Gas Storage and Transportation,2011,30(04):801.[doi:10.6047/j.issn.1000-8241.2011.11.001]
[11]朱峰,梁静华,李会朵,等.成品油混油切割与掺混试验[J].油气储运,2011,30(05):364.[doi:10.6047/j.issn.1000-8241.2001.05.013]
Zhu Feng,Liang Jinghua,Li Huiduo,et al.Testing on contamination cut and blending for products[J].Oil & Gas Storage and Transportation,2011,30(04):364.[doi:10.6047/j.issn.1000-8241.2001.05.013]
[12]李会朵,梁静华,朱峰,等.成品油混油掺混实验与临界比例计算[J].油气储运,2011,30(03):180.[doi:10.6047/j.issn.1000-8241.2011.03.006]
Li Huiduo,Liang Jinghua,Zhu Feng,et al.Mixing experiment and critical proportion calculation for contamination of products[J].Oil & Gas Storage and Transportation,2011,30(04):180.[doi:10.6047/j.issn.1000-8241.2011.03.006]
[13]胡煊,陈世一.管道顺序输送混油浓度一维模型的应用[J].油气储运,2010,29(12):913.[doi:10.6047/j.issn.1000-8241.2010.12.011]
Hu Xuan,Chen Shiyi.Application of One-dimensional Model of Contaminated Concentration in Pipeline Batch Transportation[J].Oil & Gas Storage and Transportation,2010,29(04):913.[doi:10.6047/j.issn.1000-8241.2010.12.011]
[14]刘学志,吴明,王维强,等.抚顺-鲅鱼圈成品油管道调度运行管理系统[J].油气储运,2010,29(12):954.[doi:10.6047/j.issn.1000-8241.2010.10.025]
Liu Xuezhi,Wu Ming,Wang Weiqiang.Scheduling Operating Management System for Fushun-Bayuquan Products Pipeline[J].Oil & Gas Storage and Transportation,2010,29(04):954.[doi:10.6047/j.issn.1000-8241.2010.10.025]
[15]徐燕萍,左志恒,徐光春.成品油长输管道的混油下载与切割[J].油气储运,2010,29(7):505.[doi:10.6047/j.issn.1000-8241.2010.07.008]
Xu Yanping,Zuo Zhiheng,Xu Guangchun.Contamination Unloading and Cutting of Long-distance Oil Product Pipeline[J].Oil & Gas Storage and Transportation,2010,29(04):505.[doi:10.6047/j.issn.1000-8241.2010.07.008]
[16]王剑波,陈振友.石太管道顺序输送的压力变化与控制[J].油气储运,2010,29(7):543.[doi:10.6047/j.issn.1000-8241.2010.07.019]
Wang Jianbo,Chen Zhenyou.Pressure Variation and Control of Batch Transportation in ShiTai Oil Product Pipeline[J].Oil & Gas Storage and Transportation,2010,29(04):543.[doi:10.6047/j.issn.1000-8241.2010.07.019]
[17]张争伟,凌霄,王凯,等.同沟敷设中成品油管道对原油管道顺序输送的热力影响[J].油气储运,2008,27(6):10.[doi:10.6047/j.issn.1000-8241.2008.06.003]
ZHANG Zhengwei,LING Xiao.Thermal Impact of the Product Pipeline on the Oil Temperature of the Crude Pipeline Laid in the Same Ditch in Batch Transportation[J].Oil & Gas Storage and Transportation,2008,27(04):10.[doi:10.6047/j.issn.1000-8241.2008.06.003]
[18]雍歧卫,蒋仕章,何德安,等.顺序输送混油浓度换算中的温度补偿计算[J].油气储运,2007,26(11):20.[doi:10.6047/j.issn.1000-8241.2007.11.006]
YONG Qiwei,JIANG Shizhang.Temperature Compensation of Contaminated Concentration Conversion of Batch Transportation in Multi-product Pipelines[J].Oil & Gas Storage and Transportation,2007,26(04):20.[doi:10.6047/j.issn.1000-8241.2007.11.006]
[19]唐海燕,徐舜华.顺序输送成品油管道混油量计算公式对比[J].油气储运,2007,26(10):25.[doi:10.6047/j.issn.1000-8241.2007.10.007]
TANG Haiyan,XU Xunhua.Comparison to Contaminated Volume Calculation Formulas of Batch Transportation Pipeline[J].Oil & Gas Storage and Transportation,2007,26(04):25.[doi:10.6047/j.issn.1000-8241.2007.10.007]
[20]陈世一,崔艳星,崔艳雨.成品油顺序输送管道混油量计算方法[J].油气储运,2007,26(8):16.[doi:10.6047/j.issn.1000-8241.2007.08.005]
CHEN Shiyi,CUI Yanxing.Research on the Calculation Method of Contaminated Volume in Multi-Product Pipeline[J].Oil & Gas Storage and Transportation,2007,26(04):16.[doi:10.6047/j.issn.1000-8241.2007.08.005]
戴福俊,高级工程师,1962 年生,1984 年毕业于抚顺石油学院储运专业,现主要从事长输成品油管道的运行管理工作。
电话:022-23059508;Email:dfj19620206@163.com(收稿日期:2010-11-04)