PDF下载/HTML
[1]李会朵,梁静华,朱峰,等.成品油混油掺混实验与临界比例计算[J].油气储运,2011,30(03):180-182.[doi:10.6047/j.issn.1000-8241.2011.03.006]
　Li Huiduo,Liang Jinghua,Zhu Feng,et al.Mixing experiment and critical proportion calculation for contamination of products[J].Oil & Gas Storage and Transportation,2011,30(03):180-182.[doi:10.6047/j.issn.1000-8241.2011.03.006]
点击复制

成品油混油掺混实验与临界比例计算

《油气储运》[ISSN:1000-8241/CN:13-1093/TE] 卷: 30 期数: 2011年03期 页码: 180-182 栏目: 出版日期: 2011-03-25
Title:
Mixing experiment and critical proportion calculation for contamination of products
文章编号:
1000-8241（2011）03-0180-03
作者:
李会朵1; 梁静华1; 朱峰1; 霍连风1; 张志军2; 郭祎2
1.中国石油管道科技研究中心,河北廊坊 065000；
? 2.中国石油北京油气调控中心,北京 100007
Author(s):
Li Huiduo; Liang Jinghua; Zhu Feng; et al
Li Huiduo：PetroChina Pipeline R&D Center，Langfang，Hebei，065000.
关键词:
成品油管道; 顺序输送; 混油; 掺混; 实验; 临界掺混比例; 计算公式
Keywords:
products pipeline; batch transportation; contamination; mixing; experiment; critical mixing proportion; calculation formula
分类号:
TE86
DOI:
10.6047/j.issn.1000-8241.2011.03.006
文献标志码:
A
摘要:
混油处理是成品油长距离输送管道运行管理的关键环节之一。基于将混油以掺混的方式部分或全部回掺到纯净油品中的混油处理方法，以 GB 17930－2006《车用汽油》和 GB/T 19147－2003《车用柴油》规定的质量控制指标和测试方法为依据，结合国内顺序输送管道运行的实际情况，针对特定管道开展了顺序输送油品的掺混实验。结果表明：在柴油中掺入汽油，对掺混比例最敏感的质量项目是闭口闪点；在汽油中掺入柴油，受到显著影响的质量项目有终馏点、研究法辛烷值、抗爆指数，而终馏点的敏感性表现最突出。依据测试结果，以敏感质量项目为控制目标，推荐了生产实际可采用的临界掺混比例计算公式。
Abstract:
Contamination treatment is one of the key links of operation management for long-distance products pipeline. Based on the method of mixing some or all contamination back to the pure oil，according to the quality control indicators and testing methods regulated by GB 17930-2006 motor gasoline and GB/T 19147-2003 motor diesel fuel，combined with the actual operating situation of batch transportation pipeline in China，a mixing experiment of batch transportation oil is carried out for the particular pipeline. The results show that in diesel mixed with gasoline，the most sensitive quality item to mixing proportion is the closed flash point；in gasoline mixed with diesel，the significant influence on quality item is final boiling point，research octane number，anti-explosion index，and the sensitivity of the final boiling point is the most prominent. According to the testing results，critical mixing proportion calculation formula available for the actual production is recommended with the sensitive quality item as the control target.

参考文献/References:

[1] 邓松圣，蒲家宁.对流扩散方程在成品油顺序输送混油分析中的应用[J].应用数学和力学，1998，19（8）：50-57.
?[2] 杨筱蘅，张国忠.输油管道设计与管理[M].东营：石油大学出版社，1996：297-303.

相似文献/References:

[1]林猛,牛迎战,张玲.EP减阻剂在抚顺－鲅鱼圈成品油管道的应用[J].油气储运,2011,30(05):350.[doi:10.6047/j.issn.1000-8241.2011.05.008]
　Lin Meng,Niu Yingzhan,Zhang Ling.Application of EP DRA in Fushun-Bayuquan Products Pipeline[J].Oil & Gas Storage and Transportation,2011,30(03):350.[doi:10.6047/j.issn.1000-8241.2011.05.008]
[2]徐广丽,张国忠,赵仕浩.管道低洼处积水排除实验[J].油气储运,2011,30(05):369.[doi:10.6047/j.issn.1000-8241.2011.05.014]
　Xu Guangli,Zhang Guozhong,Zhao Shihao.An experiment on dewatering for lower location of pipeline[J].Oil & Gas Storage and Transportation,2011,30(03):369.[doi:10.6047/j.issn.1000-8241.2011.05.014]
[3]夏于飞,史占华,陈亚军.卵石层地质条件下定向钻穿越工艺与设备优化[J].油气储运,2011,30(04):269.[doi:10.6047/j.issn.1000-8241.2011.04.008]
　Xia Yufei,Shi Zhanhua,Chen Yajun.Directional drilling crossing technology in pebble bed geology and equipment optimization[J].Oil & Gas Storage and Transportation,2011,30(03):269.[doi:10.6047/j.issn.1000-8241.2011.04.008]
[4]郭祎,张道全,刘鹏,等.西部成品油管道末站混油切割改进措施[J].油气储运,2011,30(07):520.[doi:10.6047/j.issn.1000-8241.2011.07.011]
　Guo Yi,Zhang Daoquan,Liu Peng,et al.Improvement of mixed oil cutting of Western Oil Product Pipeline Terminal[J].Oil & Gas Storage and Transportation,2011,30(03):520.[doi:10.6047/j.issn.1000-8241.2011.07.011]
[5]张艳彩,李珍,李绍文.成品油管道工程经济的评价问题[J].油气储运,2011,30(07):550.[doi:10.6047/j.issn.1000-8241.2011.07.022]
　Zhang Yancai,Li Zhen,Li Shaowen.Issues of economic assessment in products oil pipeline project[J].Oil & Gas Storage and Transportation,2011,30(03):550.[doi:10.6047/j.issn.1000-8241.2011.07.022]
[6]马国光,刘苏,林辉,等.油气回收装置在油库混油处理中的应用[J].油气储运,2011,30(06):478.[doi:10.6047/j.issn.1000-8241.2011.06.023]
　Ma Guoguang,Liu Su,Lin Hui,et al.Application of oil contamination recovery unit of tankfarm[J].Oil & Gas Storage and Transportation,2011,30(03):478.[doi:10.6047/j.issn.1000-8241.2011.06.023]
[7]鹿钦礼,杜明俊,马贵阳,等.变径管道对冷热原油顺序输送混油的影响[J].油气储运,2011,30(03):183.[doi:10.6047/j.issn.1000-8241.2011.03.007]
　Lu Qinli,Du Mingjun,Ma Guiyang,et al.nfluence of reduced pipeline on the batch transportation of cold-hot contaminated crude oil[J].Oil & Gas Storage and Transportation,2011,30(03):183.[doi:10.6047/j.issn.1000-8241.2011.03.007]
[8]牛迎战,刘甫,林猛,等.成品油长输管道盗油点抢修方法的应用[J].油气储运,2011,30(02):150.[doi:10.6047/j.issn.1000-8241.2011.02.019]
　Niu Yingzhan,Liu Fu,Lin Meng,et al.Application of the emergency repair method in leak point of products pipeline[J].Oil & Gas Storage and Transportation,2011,30(03):150.[doi:10.6047/j.issn.1000-8241.2011.02.019]
[9]成旭霞,林森,张宁,等.甬沪宁管道添加减阻剂增输试验[J].油气储运,2011,30(10):764.[doi:10.6047/j.issn.1000-8241.2011.10.014]
　Chen Xuxia,Lin Seng,Zhang Ning,et al.Throughput increasing experiment on YongHuNing Oil Pipeline by drag reduction agent injection[J].Oil & Gas Storage and Transportation,2011,30(03):764.[doi:10.6047/j.issn.1000-8241.2011.10.014]
[10]马红娜,李彦娥,武征.成品油管道泄漏的环境风险评价[J].油气储运,2011,30(11):801.[doi:10.6047/j.issn.1000-8241.2011.11.001]
　Ma Hongna,Li Yane,Wu Zheng.Environmental risk evaluation of leaked products pipeline[J].Oil & Gas Storage and Transportation,2011,30(03):801.[doi:10.6047/j.issn.1000-8241.2011.11.001]
[11]朱峰,梁静华,李会朵,等.成品油混油切割与掺混试验[J].油气储运,2011,30(05):364.[doi:10.6047/j.issn.1000-8241.2001.05.013]
　Zhu Feng,Liang Jinghua,Li Huiduo,et al.Testing on contamination cut and blending for products[J].Oil & Gas Storage and Transportation,2011,30(03):364.[doi:10.6047/j.issn.1000-8241.2001.05.013]
[12]戴福俊.成品油顺序输送混油的检测与切割[J].油气储运,2011,30(04):255.[doi:10.6047/j.issn.1000-8241.2011.04.004]
　Dai Fujun.Detection and cutting technique of oil contamination in batch transportation process[J].Oil & Gas Storage and Transportation,2011,30(03):255.[doi:10.6047/j.issn.1000-8241.2011.04.004]
[13]胡煊,陈世一.管道顺序输送混油浓度一维模型的应用[J].油气储运,2010,29(12):913.[doi:10.6047/j.issn.1000-8241.2010.12.011]
　Hu Xuan,Chen Shiyi.Application of One-dimensional Model of Contaminated Concentration in Pipeline Batch Transportation[J].Oil & Gas Storage and Transportation,2010,29(03):913.[doi:10.6047/j.issn.1000-8241.2010.12.011]
[14]刘学志,吴明,王维强,等.抚顺-鲅鱼圈成品油管道调度运行管理系统[J].油气储运,2010,29(12):954.[doi:10.6047/j.issn.1000-8241.2010.10.025]
　Liu Xuezhi,Wu Ming,Wang Weiqiang.Scheduling Operating Management System for Fushun-Bayuquan Products Pipeline[J].Oil & Gas Storage and Transportation,2010,29(03):954.[doi:10.6047/j.issn.1000-8241.2010.10.025]
[15]徐燕萍,左志恒,徐光春.成品油长输管道的混油下载与切割[J].油气储运,2010,29(7):505.[doi:10.6047/j.issn.1000-8241.2010.07.008]
　Xu Yanping,Zuo Zhiheng,Xu Guangchun.Contamination Unloading and Cutting of Long-distance Oil Product Pipeline[J].Oil & Gas Storage and Transportation,2010,29(03):505.[doi:10.6047/j.issn.1000-8241.2010.07.008]
[16]王剑波,陈振友.石太管道顺序输送的压力变化与控制[J].油气储运,2010,29(7):543.[doi:10.6047/j.issn.1000-8241.2010.07.019]
　Wang Jianbo,Chen Zhenyou.Pressure Variation and Control of Batch Transportation in ShiTai Oil Product Pipeline[J].Oil & Gas Storage and Transportation,2010,29(03):543.[doi:10.6047/j.issn.1000-8241.2010.07.019]
[17]张争伟,凌霄,王凯,等.同沟敷设中成品油管道对原油管道顺序输送的热力影响[J].油气储运,2008,27(6):10.[doi:10.6047/j.issn.1000-8241.2008.06.003]
　ZHANG Zhengwei,LING Xiao.Thermal Impact of the Product Pipeline on the Oil Temperature of the Crude Pipeline Laid in the Same Ditch in Batch Transportation[J].Oil & Gas Storage and Transportation,2008,27(03):10.[doi:10.6047/j.issn.1000-8241.2008.06.003]
[18]雍歧卫,蒋仕章,何德安,等.顺序输送混油浓度换算中的温度补偿计算[J].油气储运,2007,26(11):20.[doi:10.6047/j.issn.1000-8241.2007.11.006]
　YONG Qiwei,JIANG Shizhang.Temperature Compensation of Contaminated Concentration Conversion of Batch Transportation in Multi-product Pipelines[J].Oil & Gas Storage and Transportation,2007,26(03):20.[doi:10.6047/j.issn.1000-8241.2007.11.006]
[19]唐海燕,徐舜华.顺序输送成品油管道混油量计算公式对比[J].油气储运,2007,26(10):25.[doi:10.6047/j.issn.1000-8241.2007.10.007]
　TANG Haiyan,XU Xunhua.Comparison to Contaminated Volume Calculation Formulas of Batch Transportation Pipeline[J].Oil & Gas Storage and Transportation,2007,26(03):25.[doi:10.6047/j.issn.1000-8241.2007.10.007]
[20]陈世一,崔艳星,崔艳雨.成品油顺序输送管道混油量计算方法[J].油气储运,2007,26(8):16.[doi:10.6047/j.issn.1000-8241.2007.08.005]
　CHEN Shiyi,CUI Yanxing.Research on the Calculation Method of Contaminated Volume in Multi-Product Pipeline[J].Oil & Gas Storage and Transportation,2007,26(03):16.[doi:10.6047/j.issn.1000-8241.2007.08.005]

备注/Memo

作者简介：李会朵，高级工程师，1964 年生，1986 年毕业于华东石油学院自动化专业，现主要从事油气储运工艺技术研究。
电话：0316-2077914；Email：lhdgkj@163.com（收稿日期：2010-08-05）

更新日期/Last Update: