储油罐海水试压可行性技术研究

相似文献/References:

[1]张洪奎 张宁 曹旦夫.沿海地区钢结构的腐蚀及防腐涂层[J].油气储运,2012,31(2):135.[doi:CNKI:13-1093/TE.20111231.1705.008]
　Zhang Hongkui,Zhang Ning,Cao Danfu. Corrosion of steel structure and anti-corrosion coating in coastal areas[J].Oil & Gas Storage and Transportation,2012,31(9):135.[doi:CNKI:13-1093/TE.20111231.1705.008]
[2]聂世全,崔振兴,王伟峰.油罐内浮盘密封失效原因与预防措施[J].油气储运,2011,30(06):468.[doi:10.6047/j.issn.1000-8241.2011.06.019]
　Nie Shiquan,Cui Zhenxing,Wang Weifeng.Seal failure causes and prevention measures of inner floating deck of oil tank[J].Oil & Gas Storage and Transportation,2011,30(9):468.[doi:10.6047/j.issn.1000-8241.2011.06.019]
[3]樊文斌,罗自治,张策.管内高压封堵器的研制[J].油气储运,2011,30(08):657.[doi:10.6047/j.issn.1000-8241.2011.08.015]
　Fan Wenbin,Luo Zizhi,Zhang Ce.Development of high-pressure pipeline isolation plug[J].Oil & Gas Storage and Transportation,2011,30(9):657.[doi:10.6047/j.issn.1000-8241.2011.08.015]
[4]张瑶,何亮,青彩霞,等.节能涂料在减少储油罐呼吸损耗中的应用[J].油气储运,2011,30(10):790.[doi:10.6047/j.issn.1000-8241.2011.10.022]
　Zhang Yao,He Liang,Qing Caixia,et al.Application of a new type environmental protection coating material in decreasing the breathing loss of oil tank[J].Oil & Gas Storage and Transportation,2011,30(9):790.[doi:10.6047/j.issn.1000-8241.2011.10.022]
[5]赵杉林,李萍,李君华,等.罐内硫化氢腐蚀产物自燃性的研究[J].油气储运,2009,28(1):24.[doi:10.6047/j.issn.1000-8241.2009.01.007]
　ZHAO Shanlin,LI Ping.Research on the Spontaneous Combustion Characteristics of the Corrosion Produced of Hydrogen Sulfide in Oil Tanks[J].Oil & Gas Storage and Transportation,2009,28(9):24.[doi:10.6047/j.issn.1000-8241.2009.01.007]
[6]潘家华.管道老龄化问题及其应对措施[J].油气储运,2007,26(6):1.[doi:10.6047/j.issn.1000-8241.2007.06.001]
　PAN Jiahua.Pipeline Ageing Question and its Solution[J].Oil & Gas Storage and Transportation,2007,26(9):1.[doi:10.6047/j.issn.1000-8241.2007.06.001]
[7]赵新颖,李自力,王春涛.石油储罐火灾爆炸事故树分析[J].油气储运,2007,26(1):37.[doi:10.6047/j.issn.1000-8241.2007.01.009]
　ZHAO Xinying,LI Zili.Fault Tree Analysis of Fire and Explosion in Oil Tank[J].Oil & Gas Storage and Transportation,2007,26(9):37.[doi:10.6047/j.issn.1000-8241.2007.01.009]
[8]李建华,黄郑华.油罐火灾沸溢喷溅的控制措施[J].油气储运,2006,25(12):46.[doi:10.6047/j.issn.1000-8241.2006.12.011]
　LI Jianhua,HUANG Zhenghua.On the Controlling Measures against the Boil-over in Oil Tank Fires[J].Oil & Gas Storage and Transportation,2006,25(9):46.[doi:10.6047/j.issn.1000-8241.2006.12.011]
[9]朱建华.高压水清洗技术在储罐维修中的应用[J].油气储运,2006,25(9):60.[doi:10.6047/j.issn.1000-8241.2006.09.017]
　ZHU Jianhua.Application of High-pressure Water Jet Technology in Tank Repair[J].Oil & Gas Storage and Transportation,2006,25(9):60.[doi:10.6047/j.issn.1000-8241.2006.09.017]
[10]王永全,胡春伟.油罐底板检修及其焊接变形的防治措施[J].油气储运,2006,25(8):42.[doi:10.6047/j.issn.1000-8241.2006.08.012]
　WANG Yongquan,HU Chunwei.Maintenance of Tank Bottom Plate and Countermeasures against its Welding Deformation[J].Oil & Gas Storage and Transportation,2006,25(9):42.[doi:10.6047/j.issn.1000-8241.2006.08.012]
[11]姚志祥.油罐冒顶憋压损坏后的修复[J].油气储运,1998,17(5):21.[doi:10.6047/j.issn.1000-8241.1998.05.005]
　Yao Zhixiang.Rehabilitation of oil tank damaged by badly bleeding and oppression[J].Oil & Gas Storage and Transportation,1998,17(9):21.[doi:10.6047/j.issn.1000-8241.1998.05.005]