[1]王以家,冯润,王铁成.镇杭成品油管道顺序输送混油的切割与处理[J].油气储运,2002,21(8):5-7.[doi:10.6047/j.issn.1000-8241.2002.08.002]
 WANG Yijia,FENG Run.Contaminated Products Cut and Blending of Zhenhai Refinery-Hangzhou Kangqiao Products Pipeline[J].Oil & Gas Storage and Transportation,2002,21(8):5-7.[doi:10.6047/j.issn.1000-8241.2002.08.002]
点击复制

镇杭成品油管道顺序输送混油的切割与处理

相似文献/References:

[1]林猛,牛迎战,张玲.EP减阻剂在抚顺-鲅鱼圈成品油管道的应用[J].油气储运,2011,30(05):350.[doi:10.6047/j.issn.1000-8241.2011.05.008]
 Lin Meng,Niu Yingzhan,Zhang Ling.Application of EP DRA in Fushun-Bayuquan Products Pipeline[J].Oil & Gas Storage and Transportation,2011,30(8):350.[doi:10.6047/j.issn.1000-8241.2011.05.008]
[2]徐广丽,张国忠,赵仕浩.管道低洼处积水排除实验[J].油气储运,2011,30(05):369.[doi:10.6047/j.issn.1000-8241.2011.05.014]
 Xu Guangli,Zhang Guozhong,Zhao Shihao.An experiment on dewatering for lower location of pipeline[J].Oil & Gas Storage and Transportation,2011,30(8):369.[doi:10.6047/j.issn.1000-8241.2011.05.014]
[3]夏于飞,史占华,陈亚军.卵石层地质条件下定向钻穿越工艺与设备优化[J].油气储运,2011,30(04):269.[doi:10.6047/j.issn.1000-8241.2011.04.008]
 Xia Yufei,Shi Zhanhua,Chen Yajun.Directional drilling crossing technology in pebble bed geology and equipment optimization[J].Oil & Gas Storage and Transportation,2011,30(8):269.[doi:10.6047/j.issn.1000-8241.2011.04.008]
[4]郭祎,张道全,刘鹏,等.西部成品油管道末站混油切割改进措施[J].油气储运,2011,30(07):520.[doi:10.6047/j.issn.1000-8241.2011.07.011]
 Guo Yi,Zhang Daoquan,Liu Peng,et al.Improvement of mixed oil cutting of Western Oil Product Pipeline Terminal[J].Oil & Gas Storage and Transportation,2011,30(8):520.[doi:10.6047/j.issn.1000-8241.2011.07.011]
[5]张艳彩,李珍,李绍文.成品油管道工程经济的评价问题[J].油气储运,2011,30(07):550.[doi:10.6047/j.issn.1000-8241.2011.07.022]
 Zhang Yancai,Li Zhen,Li Shaowen.Issues of economic assessment in products oil pipeline project[J].Oil & Gas Storage and Transportation,2011,30(8):550.[doi:10.6047/j.issn.1000-8241.2011.07.022]
[6]马国光,刘苏,林辉,等.油气回收装置在油库混油处理中的应用[J].油气储运,2011,30(06):478.[doi:10.6047/j.issn.1000-8241.2011.06.023]
 Ma Guoguang,Liu Su,Lin Hui,et al.Application of oil contamination recovery unit of tankfarm[J].Oil & Gas Storage and Transportation,2011,30(8):478.[doi:10.6047/j.issn.1000-8241.2011.06.023]
[7]鹿钦礼,杜明俊,马贵阳,等.变径管道对冷热原油顺序输送混油的影响[J].油气储运,2011,30(03):183.[doi:10.6047/j.issn.1000-8241.2011.03.007]
 Lu Qinli,Du Mingjun,Ma Guiyang,et al.nfluence of reduced pipeline on the batch transportation of cold-hot contaminated crude oil[J].Oil & Gas Storage and Transportation,2011,30(8):183.[doi:10.6047/j.issn.1000-8241.2011.03.007]
[8]牛迎战,刘甫,林猛,等.成品油长输管道盗油点抢修方法的应用[J].油气储运,2011,30(02):150.[doi:10.6047/j.issn.1000-8241.2011.02.019]
 Niu Yingzhan,Liu Fu,Lin Meng,et al.Application of the emergency repair method in leak point of products pipeline[J].Oil & Gas Storage and Transportation,2011,30(8):150.[doi:10.6047/j.issn.1000-8241.2011.02.019]
[9]成旭霞,林森,张宁,等.甬沪宁管道添加减阻剂增输试验[J].油气储运,2011,30(10):764.[doi:10.6047/j.issn.1000-8241.2011.10.014]
 Chen Xuxia,Lin Seng,Zhang Ning,et al.Throughput increasing experiment on YongHuNing Oil Pipeline by drag reduction agent injection[J].Oil & Gas Storage and Transportation,2011,30(8):764.[doi:10.6047/j.issn.1000-8241.2011.10.014]
[10]马红娜,李彦娥,武征.成品油管道泄漏的环境风险评价[J].油气储运,2011,30(11):801.[doi:10.6047/j.issn.1000-8241.2011.11.001]
 Ma Hongna,Li Yane,Wu Zheng.Environmental risk evaluation of leaked products pipeline[J].Oil & Gas Storage and Transportation,2011,30(8):801.[doi:10.6047/j.issn.1000-8241.2011.11.001]
[11]朱峰,梁静华,李会朵,等.成品油混油切割与掺混试验[J].油气储运,2011,30(05):364.[doi:10.6047/j.issn.1000-8241.2001.05.013]
 Zhu Feng,Liang Jinghua,Li Huiduo,et al.Testing on contamination cut and blending for products[J].Oil & Gas Storage and Transportation,2011,30(8):364.[doi:10.6047/j.issn.1000-8241.2001.05.013]
[12]戴福俊.成品油顺序输送混油的检测与切割[J].油气储运,2011,30(04):255.[doi:10.6047/j.issn.1000-8241.2011.04.004]
 Dai Fujun.Detection and cutting technique of oil contamination in batch transportation process[J].Oil & Gas Storage and Transportation,2011,30(8):255.[doi:10.6047/j.issn.1000-8241.2011.04.004]
[13]李会朵,梁静华,朱峰,等.成品油混油掺混实验与临界比例计算[J].油气储运,2011,30(03):180.[doi:10.6047/j.issn.1000-8241.2011.03.006]
 Li Huiduo,Liang Jinghua,Zhu Feng,et al.Mixing experiment and critical proportion calculation for contamination of products[J].Oil & Gas Storage and Transportation,2011,30(8):180.[doi:10.6047/j.issn.1000-8241.2011.03.006]
[14]胡煊,陈世一.管道顺序输送混油浓度一维模型的应用[J].油气储运,2010,29(12):913.[doi:10.6047/j.issn.1000-8241.2010.12.011]
 Hu Xuan,Chen Shiyi.Application of One-dimensional Model of Contaminated Concentration in Pipeline Batch Transportation[J].Oil & Gas Storage and Transportation,2010,29(8):913.[doi:10.6047/j.issn.1000-8241.2010.12.011]
[15]刘学志,吴明,王维强,等.抚顺-鲅鱼圈成品油管道调度运行管理系统[J].油气储运,2010,29(12):954.[doi:10.6047/j.issn.1000-8241.2010.10.025]
 Liu Xuezhi,Wu Ming,Wang Weiqiang.Scheduling Operating Management System for Fushun-Bayuquan Products Pipeline[J].Oil & Gas Storage and Transportation,2010,29(8):954.[doi:10.6047/j.issn.1000-8241.2010.10.025]
[16]徐燕萍,左志恒,徐光春.成品油长输管道的混油下载与切割[J].油气储运,2010,29(7):505.[doi:10.6047/j.issn.1000-8241.2010.07.008]
 Xu Yanping,Zuo Zhiheng,Xu Guangchun.Contamination Unloading and Cutting of Long-distance Oil Product Pipeline[J].Oil & Gas Storage and Transportation,2010,29(8):505.[doi:10.6047/j.issn.1000-8241.2010.07.008]
[17]王剑波,陈振友.石太管道顺序输送的压力变化与控制[J].油气储运,2010,29(7):543.[doi:10.6047/j.issn.1000-8241.2010.07.019]
 Wang Jianbo,Chen Zhenyou.Pressure Variation and Control of Batch Transportation in ShiTai Oil Product Pipeline[J].Oil & Gas Storage and Transportation,2010,29(8):543.[doi:10.6047/j.issn.1000-8241.2010.07.019]
[18]张争伟,凌霄,王凯,等.同沟敷设中成品油管道对原油管道顺序输送的热力影响[J].油气储运,2008,27(6):10.[doi:10.6047/j.issn.1000-8241.2008.06.003]
 ZHANG Zhengwei,LING Xiao.Thermal Impact of the Product Pipeline on the Oil Temperature of the Crude Pipeline Laid in the Same Ditch in Batch Transportation[J].Oil & Gas Storage and Transportation,2008,27(8):10.[doi:10.6047/j.issn.1000-8241.2008.06.003]
[19]雍歧卫,蒋仕章,何德安,等.顺序输送混油浓度换算中的温度补偿计算[J].油气储运,2007,26(11):20.[doi:10.6047/j.issn.1000-8241.2007.11.006]
 YONG Qiwei,JIANG Shizhang.Temperature Compensation of Contaminated Concentration Conversion of Batch Transportation in Multi-product Pipelines[J].Oil & Gas Storage and Transportation,2007,26(8):20.[doi:10.6047/j.issn.1000-8241.2007.11.006]
[20]唐海燕,徐舜华.顺序输送成品油管道混油量计算公式对比[J].油气储运,2007,26(10):25.[doi:10.6047/j.issn.1000-8241.2007.10.007]
 TANG Haiyan,XU Xunhua.Comparison to Contaminated Volume Calculation Formulas of Batch Transportation Pipeline[J].Oil & Gas Storage and Transportation,2007,26(8):25.[doi:10.6047/j.issn.1000-8241.2007.10.007]

备注/Memo

收稿日期:2002-3-5。
作者简介:王以家,工程师,1968年生,1991年毕业于抚顺石油学院机械系石油及天然气储运专业,现在镇海炼化工程公司从事设计工作.315207,浙江省宁波市镇海炼化工程公司设计部;电话:(0574)86442423.

更新日期/Last Update: 1900-01-01