PDF下载
[1]赵荣生.史密斯双向标准体积管控制系统的检修及调试[J].油气储运,1994,13(1):38-41.[doi:10.6047/j.issn.1000-8241.1994.01.010]
　Zhao Rong-sheng.Obverhaulling and Adjusting of Smith’s Bidirectional Standard Volume Tube Control System[J].Oil & Gas Storage and Transportation,1994,13(1):38-41.[doi:10.6047/j.issn.1000-8241.1994.01.010]
点击复制

史密斯双向标准体积管控制系统的检修及调试

《油气储运》[ISSN:1000-8241/CN:13-1093/TE] 卷: 13 期数: 1994年1期 页码: 38-41 栏目: 出版日期: 1900-01-01
Title:
Obverhaulling and Adjusting of Smith’s Bidirectional Standard Volume Tube Control System
作者:
赵荣生
东北输油管理局锦州输油公司
Author(s):
Zhao Rong-sheng
关键词:
计量; 标定; 控制系统; 检修; 调试; 史密斯双向标准体积管
Keywords:
metering; calibration; control system; overhaul; adjust and test; Smith’s bidirectional standard volume tube
DOI:
10.6047/j.issn.1000-8241.1994.01.010
摘要:
提高输油泵站原油计量检测水平,需增设标准体积管控制系统。为节约开支,利用了闲置多年的史密斯双向标准体积管控制系统。该装置部分零部件锈蚀、技术资料缺乏,经过调研、现场测试、记录,掌握了有关控制部分线路图,并经过检修、调试,恢复了装置的功能,安装后已投入了生产运行。经过中国石油天然气总公司验收和辽宁省计量检定测试技术研究所标定,确定出标准体积2275.82升,重复性优于0.02%,控制系统动作灵敏、可靠,达到了国家JJG 209-80检定规程的要求。
Abstract:
To raise the inspecting level of crude oil metering at pump stations, it’s necessary to allocateanother control system——a standard volume tube: Smith’s Bidirectional Standard Volume Tube Contriol System, which had been left idle for years, was put into use for cost saving. The plant, even though part of its components had got rusted and no referencial information availabe. It became functioning again after being overhaulled, adjusted and tested based on the plan wiring obtained through investigation and study, field testing and records. Its standard volume has been up to 2275.82 liters with the reproducibility of >0.02 percent defined in accordance with CNPC acceptance test and calibration done by Metering and Testing Research Institute, Liaoning Province. Both the sensitivity and reliability of the control system are found to meet the requirements of JJG 209-80 Inspection and Calibration Regulation.

相似文献/References:

[1]商同林,张树华.旋转容积式流量计在天然气计量中的应用[J].油气储运,2011,30(01):63.[doi:10.6047/j.issn.1000-8241.2011.01.017]
　Shang Tonglin and Zhang Shuhua.The application of rotational positive displacement flowmeter in natural gas metering[J].Oil & Gas Storage and Transportation,2011,30(1):63.[doi:10.6047/j.issn.1000-8241.2011.01.017]
[2]袁献忠,薛光,黄明军,等.天然气分输站的计量调压设计[J].油气储运,2011,30(07):528.[doi:10.6047/j.issn.1000-8241.2011.07.013]
　Yuan Xianzhong,Xue Guang,Huang Mingjun,et al.Metering and pressure regulating design of gas offtake station[J].Oil & Gas Storage and Transportation,2011,30(1):528.[doi:10.6047/j.issn.1000-8241.2011.07.013]
[3]王鹏,杜梦溪,匡远奇,等.北京油气调控中心运营水平测评体系[J].油气储运,2011,30(07):539.[doi:10.6047/j.issn.1000-8241.2011.07.018]
　Wang Peng,Du Mengxi,Kuang Yuanqi,et al.Assessment system of operation level for PetroChina Oil & Gas Pipeline Control Center of Beijing[J].Oil & Gas Storage and Transportation,2011,30(1):539.[doi:10.6047/j.issn.1000-8241.2011.07.018]
[4]邢辉 张荣旺.液化天然气船到港接卸流程与优化[J].油气储运,2012,31(5):381.[doi:10.6047/j.issn.1000-8241.2012.05.016]
　Xing Hui and Zhang Rongwang.Harbor unloading process and optimization of LNG ship[J].Oil & Gas Storage and Transportation,2012,31(1):381.[doi:10.6047/j.issn.1000-8241.2012.05.016]
[5]曲卫方.LPG罐车气相余压对装车计量的影响[J].油气储运,2009,28(12):54.[doi:10.6047/j.issn.1000-8241.2009.12.017]
　QU Weifang.Influencing of Vapor-phase Residual Pressure of LPG Tanker on Loading Metering[J].Oil & Gas Storage and Transportation,2009,28(1):54.[doi:10.6047/j.issn.1000-8241.2009.12.017]
[6]郭忠明,张绚,戴长胜,等.液化石油气定量装车计量误差分析及预防[J].油气储运,2009,28(1):54.[doi:10.6047/j.issn.1000-8241.2009.01.017]
　GUO Zhongming,ZHANG Xuan.Analysis on Meting Error of Quantitative Loading Technique of LPG and Error Removal[J].Oil & Gas Storage and Transportation,2009,28(1):54.[doi:10.6047/j.issn.1000-8241.2009.01.017]
[7]刘钦,宋庆维,申振宏.HGC-1型原油自动交接系统在卸油计量中的应用[J].油气储运,2007,26(5):43.[doi:10.6047/j.issn.1000-8241.2007.05.012]
　LIU Qin,SONG Qingwei.The Application of HGC-1 Crude Oil Custody Transfer System in Oil Unloading Metering of Oilfield[J].Oil & Gas Storage and Transportation,2007,26(1):43.[doi:10.6047/j.issn.1000-8241.2007.05.012]
[8]刘培军,郝建斌,曹水来.不均衡用气条件下天然气的计量分析[J].油气储运,2004,23(6):48.[doi:10.6047/j.issn.1000-8241.2004.06.015]
　LIU Peijun,HAO Jianbin.Gas Metering Analysis under the Unbalanced Gas Consumption Conditions[J].Oil & Gas Storage and Transportation,2004,23(1):48.[doi:10.6047/j.issn.1000-8241.2004.06.015]
[9]虞庆文.腰轮流量计在油品计量中的误差分析[J].油气储运,2004,23(3):48.[doi:10.6047/j.issn.1000-8241.2004.03.016]
　YU Qingwen.Error Analysis on Roots Flowmeter in Products Metering[J].Oil & Gas Storage and Transportation,2004,23(1):48.[doi:10.6047/j.issn.1000-8241.2004.03.016]
[10]郭忠明.液化石油气气相对罐内液相计量的影响[J].油气储运,2004,23(2):43.[doi:10.6047/j.issn.1000-8241.2004.02.016]
　GUO Zhongming.Loading and Unloading Process of LPG Influences the Metering Accuracy[J].Oil & Gas Storage and Transportation,2004,23(1):43.[doi:10.6047/j.issn.1000-8241.2004.02.016]
[11]张明.10万m3立式油罐容积的标定与分析[J].油气储运,1993,12(6):43.[doi:10.6047/j.issn.1000-8241.1993.06.014]
　Zhang Ming.Carlibration and Analysis of the Capacity of 10×1033 m3 Vertical Tanks[J].Oil & Gas Storage and Transportation,1993,12(1):43.[doi:10.6047/j.issn.1000-8241.1993.06.014]
[12]程达.如何提高体积管标准体积的准确性[J].油气储运,1990,9(5):56.[doi:10.6047/j.issn.1000-8241.1990.05.014]
　Cheng Da.How to Increase the Accuracy of Meter Prover[J].Oil & Gas Storage and Transportation,1990,9(1):56.[doi:10.6047/j.issn.1000-8241.1990.05.014]

备注/Memo

收稿日期:1993-11-12。
作者简介:赵荣生工程师,1956年生,1989年毕业于沈阳化工学院化工自动化及仪表专业,从事自动化仪表管理工作.

更新日期/Last Update: 1900-01-01