[1]郭超,俞龙,赵泽茂,等.南苏丹法罗杰FPF 站场气相腐蚀分析及对策[J].油气储运,2018,37(5):527-532.[doi:10.6047/j.issn.1000-8241.2018.05.008]
 GUO Chao,YU Long,ZHAO Zemao,et al.Factor analysis and countermeasures of gas corrosion at Palouch FPF station in the South Sudan[J].Oil & Gas Storage and Transportation,2018,37(5):527-532.[doi:10.6047/j.issn.1000-8241.2018.05.008]
点击复制

南苏丹法罗杰FPF 站场气相腐蚀分析及对策

参考文献/References:

[1] LI X G,ZHANG D W,LIU Z Y,et al. Share corrosion data[J].Nature,2015,527(7479):441-442.
[2] 黄振东,劳景水,罗军,等. 高压高含量二氧化碳气田井口管道设计[J]. 油气储运,2015,34(5):552-556.
HUANG Z D,LAO J S,LUO J,et al. Wellhead pipeline designfor high-pressure and high-CO2 gasfields[J]. Oil & Gas Storageand Transportation,2015,34(5):552-556.
[3] MANSOORI H,MIRZAEE R,ESMAEILZADEH F,et al.Pitting corrosion failure analysis of a wet gas pipeline[J].Engineering Failure Analysis,2017,82:16-25.
[4] LI P,ZHAO Y,LIU B,et al. Experimental testing and numericalsimulation to analyze the corrosion failures of single wellpipelines in Tahe oilfield[J]. Engineering Failure Analysis,2017,80:112-122.
[5] GUENTER S,MICHAELA H. Fundamental aspects of CO2metal loss corrosion – part II:influence of different parameterson CO2 corrosion mechanisms[C]. San Diego:61st AnnualConference and Exposition,San Diego,2006:1-26.
[6] SVENNINGSEN G,MORLAND B H,DUGSTAD A,etal. Stress corrosion cracking testing of 13Cr stainless steel indense phase CO2 with oxygen[J]. Energy Procedia,2017,114:6778-6799.
[7] WAARD D C,LOTZ U,MILLIAMS D E. Predictive modelfor CO2 corrosion engineering in wet natural gas pipelines[J].Corrosion,1991,47(12):976.
[8] 张国华,张国庆,李妍. 油气田CO2 腐蚀典型预测模型的比较及探究[J]. 全面腐蚀控制,2008,22(4):47-51.
ZHANG G H,ZHANG G Q,LI Y. A contrast and research onseveral typical predictive models for CO2 corrosion of oil and gasfields[J]. Total Corrosion Control,2008,22(4):47-51.
[9] SOBHAN H,ALIREZA G A,MOHAMMAD N K,et al. Onthe prediction of CO2 corrosion in petroleum industry[J]. TheJournal of Supercritical Fluids,2016,117:108-112.
[10] KERMANI M B,SMITH L M. CO2 corrosion control in oiland gas production[M]. London:The Institute of Materials,1997:18-19.
[11] 张国安,陈长风,路民旭,等. 油气田中CO2 腐蚀的预测模型[J]. 中国腐蚀与防护学报,2005,25(2):119-123.
ZHANG G A,CHEN C F,LU M X,et al. Prediction modelsfor CO2 corrosion of oil and gas fields[J]. Journal of ChineseSociety for Corrosion and Protection,2005,25(2):119-123.
[12] MORLAND B H,DUGSTAD A,SVENNINGSEN G.
Corrosion of carbon steel in dense phase CO2 with water aboveand below the solubility limit[J]. Energy Procedia,2017,114:6752-6765.
[13] 梅士盛. 苏丹Palogue 油田注CO2 采油实验和数值模拟研究[D]. 北京:中国科学院研究生院(渗流流体力学研究所),2006:12.
MEI S S. Study on experiment and simulation of CO2 injection in Palogue oilfield of Republic of the Sudan[D]. Beijing:Graduate University of Chinese Academy of Sciences,2006:12.
[14] TANUPABRUNGSUN T, BROWN B, NESIC S. Effect ofpH on CO2 corrosion of mild steel at elevated temperatures[C].Orlancb:CORROSION 2013,2013:1-11.
[15] MOBBASSAR H S,ABOUBAKR M A,MONIKA K,et al.
Local supersaturation and the growth of protective scales duringCO2 corrosion of steel:Effect of pH and solution flow[J].Corrosion Science,2017,126:26-36.
[16] 李春福,张颖,王斌,等. 油气开发过程中CO2 腐蚀产物膜的研究进展[J]. 腐蚀与防护,2005,26(10):443-447.
LI C F,ZHANG Y,WANG B,et al. Advances in the researchof CO2 corrosion films in oil and gas production[J]. Corrosion& Protection,2005,26(10):443-447.
[17] OLVERA-MART?NEZ M E, MENDOZA-FLORES J,GENESCA J. CO2 corrosion control in steel pipelines. Influenceof turbulent flow on the performance of corrosion inhibitors[J].Journal of Loss Prevention in the Process Industries,2015,35:19-28.
[18] LI W,XU L N,QIAO L J,et al. Effect of free Cr content oncorrosion behavior of 3Cr steels in a CO2 environment[J].Applied Surface Science,2017,425(15):32-45.
[19] NAVEEN E,RAMNATH V B,ELANCHEZHIAN C,et al.
Influence of organic corrosion inhibitors on pickling corrosionbehaviour of sinter-forged C45 steel and 2% Cu alloyed C45steel[J]. Journal of Alloys and Compounds,2017,695(25):3299-3309.
[20] SINGH A,LIN Y H,ANSARI K R,et al. Electrochemicaland surface studies of some porphines as corrosion inhibitor forJ55 steel in sweet corrosion environment[J]. Applied SurfaceScience,2015, 359(30):331-339.

相似文献/References:

[1]刘晓燕,刘扬,康凯,等.热油管道停输再启动模拟试验[J].油气储运,2010,29(3):171.[doi:10.6047/j.issn.1000-8241.2010.03.004]
 Liu Xiaoyan,Liu Yang,Kang Kai.Simulation Testing on Shut-down and Restart-up of Hot Oil Pipelines[J].Oil & Gas Storage and Transportation,2010,29(5):171.[doi:10.6047/j.issn.1000-8241.2010.03.004]
[2]耿德江,王岳,翁蕾,等.温度对高凝成品油管壁结蜡规律影响的研究[J].油气储运,2009,28(10):52.[doi:10.6047/j.issn.1000-8241.2009.10.014]
 GENG Dejiang,WANG Yue.Study of Temperature Influence on Pipe Wall Wax Deposit Law of High Pour Point Oil Product[J].Oil & Gas Storage and Transportation,2009,28(5):52.[doi:10.6047/j.issn.1000-8241.2009.10.014]
[3]龚大利.大庆油田高含水原油流变性的研究[J].油气储运,2005,24(8):25.[doi:10.6047/j.issn.1000-8241.2005.08.008]
 GONG Dali.Study on the Rheology of High Water-content Crude Oil in Daqing Oilfield[J].Oil & Gas Storage and Transportation,2005,24(5):25.[doi:10.6047/j.issn.1000-8241.2005.08.008]
[4]王可中.混合原油温度对流变性的影响[J].油气储运,2004,23(1):15.[doi:10.6047/j.issn.1000-8241.2004.01.005]
 WANG Kezhong.Temperature Variation Influences the Rheology of Blend Crude Oil[J].Oil & Gas Storage and Transportation,2004,23(5):15.[doi:10.6047/j.issn.1000-8241.2004.01.005]
[5]黄启玉,苗青,杨占品,等.一种由混合油粘度求混合油比例的新方法[J].油气储运,2002,21(1):32.[doi:DOI:10.6047/j.issn.1000-8241.2002.01.009]
 HUANG Qiyu,MIAO Qing.A New Method Derived the Proportion of Mixed Oil from the Viscosity of Mixed Oil[J].Oil & Gas Storage and Transportation,2002,21(5):32.[doi:DOI:10.6047/j.issn.1000-8241.2002.01.009]
[6]唐桂华.球罐容积的检定和修正[J].油气储运,2001,20(5):52.[doi:DOI:10.6047/j.issn.1000-8241.2001.05.015]
 Tang Guihua.Volume Strapping and Correction of Spherical Tank[J].Oil & Gas Storage and Transportation,2001,20(5):52.[doi:DOI:10.6047/j.issn.1000-8241.2001.05.015]
[7]喻西崇,冯叔初,李玉星.多相流管道温降公式的推导[J].油气储运,2000,19(4):22.[doi:10.6047/j.issn.1000-8241.2000.04.006]
 Yu Xichong,Feng Shuchu.The Deduction of Temperature Drop Formula to Calculate Multiphase Pipeline[J].Oil & Gas Storage and Transportation,2000,19(5):22.[doi:10.6047/j.issn.1000-8241.2000.04.006]
[8]刘焕桥,陶锦娟.应用立式罐罐壁平均温度计算式的建议[J].油气储运,2000,19(1):35.[doi:DOI:10.6047/j.issn.1000-8241.2000.01.012]
 Liu Huanqiao.The Average Tank-shell Temperature Formula Can Acurrately Measure the Tank Volume for Vertical Tank[J].Oil & Gas Storage and Transportation,2000,19(5):35.[doi:DOI:10.6047/j.issn.1000-8241.2000.01.012]
[9]李锦昕.原油加剂改性的影响因素[J].油气储运,1999,18(9):32.[doi:10.6047/j.issn.1000-8241.1999.09.009]
 Li Jinxin.Influence Factors on Modifield Crude Oil[J].Oil & Gas Storage and Transportation,1999,18(5):32.[doi:10.6047/j.issn.1000-8241.1999.09.009]
[10]李宝山,杜秋萍,段马力,等.油罐车的非稳定传热计算[J].油气储运,1997,16(3):13.[doi:10.6047/j.issn.1000-8241.1997.03.004]
 Li Baoshan,Du Qiuping.The Calculation on Non-Stable Heat Transfer for Road Tanker[J].Oil & Gas Storage and Transportation,1997,16(5):13.[doi:10.6047/j.issn.1000-8241.1997.03.004]

备注/Memo

基金项目:中石油集团公司工程建设板块项目“四新技术应用研究”,2012GJTC-01-07-02。
作者简介:郭超,男,1978 年生,高级工程师,2007 年博士毕业于北京化工大学材料学专业,现主要从事油气选材、防腐的设计和相关技术研究。地址:北京市朝阳区安立路101 号名人大厦32 层,100101。电话:18101336578,Email:guochao@cpecc.com.cn

更新日期/Last Update: 2018-05-15