[1]鹿锋华,赵海鸿,曹晓燕.API1104与СНиП管道焊接工艺评定及焊工认证的对比分析[J].油气储运,2015,34(4):435-438.[doi:10.6047/j.issn.1000-8241.2015.04.020]
 LU Fenghua,ZHAO Haihong,CAO Xiaoyan.Comparative analysis of API 1104 and СНиП for assessment of welding techniques and welder certification[J].Oil & Gas Storage and Transportation,2015,34(4):435-438.[doi:10.6047/j.issn.1000-8241.2015.04.020]
点击复制

API1104与СНиП管道焊接工艺评定及焊工认证的对比分析

参考文献/References:

[1] 隋永莉,薛振奎,赵海鸿,等. 石油天然气金属管道焊接工艺评 定标准对比分析[J].压力容器,2006,12(6):1-5.
SUI Y L, XUE Z K, ZHAO H H, et al. Contrast of standard for weld procedure qualification of oil & gas metal pipeline[J]. Pressure Vessel Technology, 2006, 12(6): 1-5.
[3] 周立欣,王建国,郭建良,等. 俄罗斯 СНиП Ⅲ-42-80 与 GB 50368-2006 的对比[J]. 油气储运,2011,30(9):702-704.
ZHOU L X, WANG J G, GUO J L, et al. A comparison between the Russian СНиП III-42-80* and GB 50369-2006[J]. Oil & Gas Storage and Transportation, 2011, 30(9): 702-704.
[4] 王贵斌. 国际工程管道焊接质量过程管理初探[J]. 化学工程与 设备,2009(6):194-197.
WANG G B. A Study of the quality process management of pipeline welding in international engineering[J]. Chemical Engineering & Equipment, 2009(6): 194-197.
[5] 许威,李彦胜,尚用甲,等. 两种石油管道焊接典型标准的焊工 评定区别分析[J]. 电焊接,2009(6):194-197.
XU W, LI Y S, SHANG Y J, et al. Different analysis of welder qualification test on two typical codes in submarine pipelines welding[J]. Electric Welding Machine, 2009(6):194-197.
[6] ГОСУДАРСТВЕННЫЙ КОМИТЕТ СССР ПО ДЕЛАМ СТРОИТЕЛЬСТВА (ГОССТРОЙ СССР). СНиП Ⅲ-42-80 Магистральные трубопроводы Правила производства и приемки работ[S]. Mосква:Государственного комитета СССР по делам строительства,1997.
[7] 白世武. 管道环焊缝焊接缺陷相控阵超声检测系统研究[D]. 天 津:天津大学,2010.
BAI S W. Research on ultrasonic phased arrays detecting system for pipeline girth welding defect[D]. Tianjin: Tianjin University, 2010.
[8] 米秋占. 输气管线环焊缝焊接工艺研究[D]. 天津:天津大学, 2004.
MI Q Z. A study of the welding process for gas pipeline circumferential welds[D]. Tianjin: Tianjin University, 2004.
[9] 孟凡刚,陈玉华,王勇. X80 钢管道及现场环焊缝焊接技术发展 现状[J]. 石油化工设备,2008,37(3):44-49.
MENG F G, CHEN Y H, WANG Y. Development and present status of X80 steel pipeline and its welding technique[J]. Petro-Chemical Equipment, 2008, 37(3): 44-49.
[10] 乔宁. ERW 焊管环焊缝焊接接头的质量评定[J]. 石油工业技 术监督,2005,21(12):25-27.
QIAO N. Quality evaluation of the girth welding connection of ERW welding pipe[J]. Technology Supervision in Petroleum Industry, 2005, 21(12): 25-27.
[11] 轩艳群. 输气管线环焊缝焊接工艺探讨[J]. 科学之友,2010 (27):31-32.
XUAN Y Q. Gas pipeline girth weld process[J]. Friend of Science Amateurs, 2010 (27): 31-32.
[12] 高守稳. 对输气管线环焊缝焊接的探讨[J]. 科技促进发展, 2010(增刊1):25-26.
GAO S W. A discussion on the welding of oil pipeline circumferential welds[J]. Science & Technology for Development, 2010(Supplementary issue 1): 25-26.
[13] 隋永莉,曹晓军,胡小坡. 油气管道环焊缝焊接施工应关注的 问题及建议[J]. 焊管,2014,37(5):62-65, 72.
SUI Y L, CAO X J, HU X P. Focus on problems and suggestions of oil and gas pipeline circumferential weld welding at site construction[J]. Welded Pipe and Tube, 2014, 37(5): 62-65, 72.
[14] 张骁勇,张雪琴,刘涛,等. 高频电阻焊输送管环焊缝焊接接头 的质量评定[J]. 焊接技术,2006,35(2):62-63.
ZHANG X Y, ZHANG X Q, LIU T, et al. Quality evaluation on girth welded joint of high frequency resistance welding transporting pipe[J]. Welding Technology, 2006, 35(2): 62-63.
[15] 隋永莉. 国产X80 管线钢焊接技术研究[D]. 天津:天津大学, 2008.
SUI Y L. Welding technology research for girth of domestic X80 grade line pipe[D]. Tianjin: Tianjin University, 2008.
[16] 张世涛. 高铌X80 钢管环焊缝的安全评定研究[D]. 天津:天 津大学,2008.
ZHANG S T. Study on safety assessment of circumferential weld for the high-Nb X80 steel pipe[D]. Tianjin: Tianjin University, 2008.
[17] 王丽.X80 管线钢环缝焊接工艺及接头性能研究[D]. 天津:天 津大学,2007.
WANG L. Research on the welding techniques and joint performance of the X80 pipeline steel[D]. Tianjin: Tianjin University, 2007.
[18] 黄福祥,隋永莉,曾惠林. 西气东输二线工程X80 钢管半自动 焊工艺研究[J]. 压力容器,2009,26(5):13-17.
HUANG F X, SUI Y L, ZENG H L. Research on X80 pipeline steel semi-automatic welding for West to East Gas Pipeline II project[J]. Pressure Vessel Technology, 2009, 26(5): 13-17.
[19] 刘志义. X80 钢半自动焊及低温焊接施工工艺研究[D]. 北京: 中国石油大学(北京),2011.
LIU Z Y. Study on construction process of semi-automatic welding and low-temperature welding of X80 pipeline steel[D]. Beijing: China University of Petroleum - Beijing, 2011.

备注/Memo

收稿日期:2014-2-7;改回日期:2014-12-26。
作者简介:鹿锋华,工程师,1981年生,2007年硕士毕业于东北大学机械工艺制造及其自动化专业,现主要从事管道焊接工艺、焊接装备及其自动化方向相关技术的研究工作.Tel:13231620003,Email:lufenghua0402@163.com

更新日期/Last Update: 1900-01-01