[1]李财先,刁福俊,贾春桦,等.管式加热炉结垢机理与水击现象[J].油气储运,2011,30(08):640-642.[doi:10.6047/j.issn.1000-8241.2011.08.011]
 Li Caixian,Diao Fujun,Jia Chunhua,et al.Scaling mechanism and water hammer of tubular heater[J].Oil & Gas Storage and Transportation,2011,30(08):640-642.[doi:10.6047/j.issn.1000-8241.2011.08.011]
点击复制

管式加热炉结垢机理与水击现象

参考文献/References:

[1] 唐涤,张鉴,王兰生,等.SY/T 5523 - 2006 油田水分析方法[S].北京:石油工业出版社,2006.
[2]国家能源局.SY/T 0600-2009 油田水结垢趋势预测[S]. 北京:石油工业出版社,2009.
[3]唐涤,张鉴,苏忠锐,等.SY/T 5516 - 2000 碳酸盐岩化学分析方法[S]. 北京:石油工业出版社,2000.
[4]中国石油天然气总公司.SY/T 5673-1993 油田防垢剂性能评定方法[S]. 北京:石油工业出版社,1993.
[5]王树人. 水击理论与水击计算[M]. 北京:清华大学出版社,1981:1-2, 8-10.
[6]国家质量监督检验检疫总局.GB/T 1576-2008 工业锅炉水质[S]. 北京:中国标准出版社,2009.

相似文献/References:

[1]李自力,禹浩,程中海.长庆油田混输管道的结垢与防垢措施[J].油气储运,2011,30(02):133.[doi:10.6047/j.issn.1000-8241.2011.02.013]
 Li Zili,Yu Hao,Cheng Zhonghai.Scaling and anti-scaling in mixed transportation in Changqing oilfiled[J].Oil & Gas Storage and Transportation,2011,30(08):133.[doi:10.6047/j.issn.1000-8241.2011.02.013]
[2]裴召华.提高管式加热炉热效率的措施[J].油气储运,2009,28(11):52.[doi:DOI:10.6047/j.issn.1000-8241.2009.11.014]
 PEI Zhaohua.Technical Measures to Increase Heat Efficiency of Tubular Heaters[J].Oil & Gas Storage and Transportation,2009,28(08):52.[doi:DOI:10.6047/j.issn.1000-8241.2009.11.014]
[3]王兵,李长俊,廖柯熹,等.管道结垢原因分析及常用除垢方法[J].油气储运,2008,27(2):59.[doi:10.6047/j.issn.1000-8241.2008.02.017]
 WANG Bing,LI Changjun.Study on Fouling and Scale Removing of Pipeline[J].Oil & Gas Storage and Transportation,2008,27(08):59.[doi:10.6047/j.issn.1000-8241.2008.02.017]
[4]蒋官澄,梁宗会,李学甫,等.硫酸钡锶阻垢剂在输油管道上的应用[J].油气储运,2002,21(8):38.[doi:10.6047/j.issn.1000-8241.2002.08.011]
 JIANG Guancheng,LIANG Zonghui.The Application of Barium-Strontium Sulfate Scale Retarder in Oil Pipeline[J].Oil & Gas Storage and Transportation,2002,21(08):38.[doi:10.6047/j.issn.1000-8241.2002.08.011]
[5]高联益,安锦,闫东.大王庄油田掺水管道腐蚀结垢的研究[J].油气储运,2001,20(10):28.[doi:10.6047/j.issn.1000-8241.2001.10.007]
 Gao Lianyi,An Jin.A Study on the Corrosion and Scale Buildup of Produced-Water Reinjection Pipeline in Dawangzhuang Oilfield[J].Oil & Gas Storage and Transportation,2001,20(08):28.[doi:10.6047/j.issn.1000-8241.2001.10.007]
[6]韩力,路平,王中武,等.陆梁油田抽油井井下防腐防垢技术[J].油气储运,2010,29(11):841.[doi:10.6047/j.issn.1000-8241.2010.11.011]
 Han Li,Lu Ping,Wang Zhongwu.Anticorrosive and Scale Prevention Technique for Pumping Well in Luliang Oilfield[J].Oil & Gas Storage and Transportation,2010,29(08):841.[doi:10.6047/j.issn.1000-8241.2010.11.011]
[7]陈晓辉,王勇,余良民,等.HBP-1型声波除灰器在管式加热炉上的应用[J].油气储运,2006,25(11):56.[doi:10.6047/j.issn.1000-8241.2006.11.016]
 CHEN Xiaohui,WANG Yong.The Application of HBP-1 Wide-band Acoustic Wave Highly Efficient Sootor in Tubular Heater[J].Oil & Gas Storage and Transportation,2006,25(08):56.[doi:10.6047/j.issn.1000-8241.2006.11.016]
[8]蒋官澄,马先平,纪朝凤,等.大港三厂注水系统结垢趋势预测[J].油气储运,2006,25(7):43.[doi:10.6047/j.issn.1000-8241.2006.07.011]
 JIANG Guancheng,MA Xianping.The Research and Application of Scaling Tendency Prediction Technique for Every Waterflood System in Dagang Oilfield[J].Oil & Gas Storage and Transportation,2006,25(08):43.[doi:10.6047/j.issn.1000-8241.2006.07.011]
[9]丁芝来,张国华.热媒换热器结垢的原因及治理方案[J].油气储运,1996,15(6):17.[doi:10.6047/j.issn.1000-8241.1996.06.007]
 Ding Zhilai,Zhang Guohua.The Causes for Fouling in Heat Medium Exchanger and Its Cor-rective Measures[J].Oil & Gas Storage and Transportation,1996,15(08):17.[doi:10.6047/j.issn.1000-8241.1996.06.007]
[10]赵明,李艳荣.循环水结垢和腐蚀的机理及其控制[J].油气储运,1998,17(2):25.[doi:10.6047/j.issn.1000-8241.1998.02.007]
 Zhao Ming,Li Yanrong.The Scaling Mechanism of Recirculated Water and Corrosion Control[J].Oil & Gas Storage and Transportation,1998,17(08):25.[doi:10.6047/j.issn.1000-8241.1998.02.007]

备注/Memo

?作者简介:李财先,工程师,1981 年生,2006 年毕业于中国石油大学(北京)材料科学与防腐专业,现主要从事加热炉的设计工作。
电话:0316-2373121;Email:cppmlicx@cnpc.com.cn(收稿日期:2010-12-24)

更新日期/Last Update: