PDF下载/HTML
[1]唐平,关志永,石睿,等.广东潮州大型LPG 冷库建设[J].油气储运,2011,30(06):472-473.[doi:10.6047/j.issn.1000-8241.2011.06.020]
　Tang Ping,Guan Yongzhi,Shi Rui,et al.Construction technique in Chaozhou LPG Freezer of Guangdong Province[J].Oil & Gas Storage and Transportation,2011,30(06):472-473.[doi:10.6047/j.issn.1000-8241.2011.06.020]
点击复制

广东潮州大型LPG 冷库建设

《油气储运》[ISSN:1000-8241/CN:13-1093/TE] 卷: 30 期数: 2011年06期 页码: 472-473 栏目: 出版日期: 2011-06-25
Title:
Construction technique in Chaozhou LPG Freezer of Guangdong Province
文章编号:
1000-8241（2011）06-0472-02
作者:
唐平1; 关志永2; 石睿2; 杨禹3
1. 广东省深圳市科铭达实业有限公司，广东深圳 518054 ；
?2. 广东省潮州市华丰造气厂有限公司，广东潮州 524022 ；
?3. 浙江省嵊州中石油昆仑燃气公司，浙江嵊州 312400
Author(s):
Tang Ping; Guan Yongzhi; Shi Rui; et al
Tang Ping：Shenzhen Sciencestone Industy Co.Limited，Shenzhen，Guangdong，518054.
关键词:
LPG 冷库; 低温储罐; 软地基; 压缩机; 土工布加筋复合垫层
Keywords:
LPG freezer; low-temperature tank; weak base; desalination of sea water; compressor; reinforced geotextile cushion
分类号:
TE972
DOI:
10.6047/j.issn.1000-8241.2011.06.020
文献标志码:
A
摘要:
广东潮州华丰LPG 冷库建设工程在消化吸收国外先进技术的基础上，实施多项技术创新：采用土工织物加筋垫层处理储罐软地基；将消防水循环使用，作为丙烷的换热载体，解决了设备和管道
的腐蚀问题；使用不同规格的丙烷和丁烷压缩机，解决压缩机间负荷不一致以及两种气体加压时间不同步的问题；采用“分离结构”方案，现场配制低温储罐抗压圈结构，20 kPa 气密性试压结果证实其具有必要的可靠度和安全性。这些技术创新，不仅使工程质量达到了国内外有关规范的要求，而且大幅节省了工程投资，使该工程成为国内单位储量投资最少的大型LPG 冷冻库。
Abstract:
Chaozhou Huafeng LPG Freezer of Guangdong Province was put into construction with innovated combination techniques.
During the project construction，the reinforced geotextile cushion was adopted to treat with the weak base of tank the fire water，
as a carrier of heat exchange of propane，was recycled the desalinated sea water was used in corrosion control of device and
pipeline propane and butane compressors were put into operation to fit their load and synchronically compress them；based on
“split structure” plan，the compressive cushion suitable for low-temperature tank was field manufactured，and tightness testing
at 20 kPa gave safety and reliability. As a lowest cost case in inland large-scale LPG freezer construction，the project met the
relative specifications and standards at home and abroad.

参考文献/References:

[1] American Petroleum Institute.API Standard 620 Design and construction of large，welded，low-pressure storage tanks[S].2003.

相似文献/References:

[1]张培元.日本低温储罐的发展[J].油气储运,1986,5(1):34.[doi:10.6047/j.issn.1000-8241.1986.01.007]
　Zhang Pei-yuan.The Advance of L. T. Tanks in Japan[J].Oil & Gas Storage and Transportation,1986,5(06):34.[doi:10.6047/j.issn.1000-8241.1986.01.007]
[2]何才宁.加气站LNG低温储罐液位计比选及优化方案[J].油气储运,2015,34(9):961.[doi:10.6047/j.issn.1000-8241.2015.09.009]
　HE Caining.Comparison and optimal scheme of level gauge for low-temperature LNG tank in gas filling station[J].Oil & Gas Storage and Transportation,2015,34(06):961.[doi:10.6047/j.issn.1000-8241.2015.09.009]

备注/Memo

作者简介：唐平，工程师，1958 年生，1983 年毕业于河北廊坊管道职工学院管道工程专业，现主要从事储运与阴极保护工程的设计与
施工工作。电话：13828271880 ；Email：chenhongyun@126.com?（收稿日期：2010-02-24）

更新日期/Last Update: