PDF下载
分享
[1]韩志广,宫敬.兰成渝成品油管道仿真系统的开发[J].油气储运,2003,22(2):20-23.[doi:10.6047/j.issn.1000-8241.2003.02.005]
　HAN Zhiguang,GONG Jing.The Development of Simulation System for Lanzhou—Chengdu—Chongqing Products Pipeline[J].Oil & Gas Storage and Transportation,2003,22(2):20-23.[doi:10.6047/j.issn.1000-8241.2003.02.005]
点击复制

兰成渝成品油管道仿真系统的开发

《油气储运》[ISSN:1000-8241/CN:13-1093/TE] 卷: 22 期数: 2003年2期 页码: 20-23 栏目: 出版日期: 1900-01-01
Title:
The Development of Simulation System for Lanzhou—Chengdu—Chongqing Products Pipeline
作者:
韩志广1;  宫敬2
1.中国化工进出口总公司;
2.石油大学(北京)
Author(s):
HAN Zhiguang1;  GONG Jing2
关键词:
成品油管道; 计算机; 仿真系统; 模型; 设计; 应用
Keywords:
products pipeline; computer; simulation system; model; design; application
DOI:
10.6047/j.issn.1000-8241.2003.02.005
摘要:
以兰成渝成品油管道为例,介绍了成品油管道计算机仿真模型的建立和软件的开发过程。仿真模型包括设备、中间分输站、首站等模型,仿真软件由11种模块构成,给出了仿真程序软件的框图。这种仿真系统有助于操作者迅速掌握管道动态运行时全线水力过程的变化和对全线的监控。
Abstract:
The model design and software development of products pipeline simulation is introduced based on the example of Lanzhou—Chengdu—Chongqing Products Pipeline.There are equipment,offtake station, initial station and so on in the simulation model.The simulation software consists of 11 models.The frame of simulation software also is given in the paper.The simulation system will help operators to master promptly the change of the surge process during the dynamic running of pipeline and monitor the whole pipeline.

参考文献/References:

[1] Forlenza D G : New Training Technology for the Pipeline Industry, Pipeline Industry,1992(4).
[2] 常大海等:国外管道仿真技术发展概况,油气储运,1997,16(10).
[3] 蒲家宁:管道水击分析与控制,机械工业出版社(北京),1991.
[4] 宫敬于达等:庆铁输油管道仿真系统发动机设计及其实现,油气储运,1999,18(12).
[5] 严大凡:输油管道设计与管理,石油工业出版社(北京),1989年.
[6] 杨筱蘅张国忠:输油管道设计与管理,石油工业出版社(北京),1996.

相似文献/References:

[1]徐广丽,张国忠,赵仕浩.管道低洼处积水排除实验[J].油气储运,2011,30(05):369.[doi:10.6047/j.issn.1000-8241.2011.05.014]
　Xu Guangli,Zhang Guozhong,Zhao Shihao.An experiment on dewatering for lower location of pipeline[J].Oil & Gas Storage and Transportation,2011,30(2):369.[doi:10.6047/j.issn.1000-8241.2011.05.014]
[2]戴福俊.成品油顺序输送混油的检测与切割[J].油气储运,2011,30(04):255.[doi:10.6047/j.issn.1000-8241.2011.04.004]
　Dai Fujun.Detection and cutting technique of oil contamination in batch transportation process[J].Oil & Gas Storage and Transportation,2011,30(2):255.[doi:10.6047/j.issn.1000-8241.2011.04.004]
[3]郭祎,张道全,刘鹏,等.西部成品油管道末站混油切割改进措施[J].油气储运,2011,30(07):520.[doi:10.6047/j.issn.1000-8241.2011.07.011]
　Guo Yi,Zhang Daoquan,Liu Peng,et al.Improvement of mixed oil cutting of Western Oil Product Pipeline Terminal[J].Oil & Gas Storage and Transportation,2011,30(2):520.[doi:10.6047/j.issn.1000-8241.2011.07.011]
[4]张艳彩,李珍,李绍文.成品油管道工程经济的评价问题[J].油气储运,2011,30(07):550.[doi:10.6047/j.issn.1000-8241.2011.07.022]
　Zhang Yancai,Li Zhen,Li Shaowen.Issues of economic assessment in products oil pipeline project[J].Oil & Gas Storage and Transportation,2011,30(2):550.[doi:10.6047/j.issn.1000-8241.2011.07.022]
[5]李会朵,梁静华,朱峰,等.成品油混油掺混实验与临界比例计算[J].油气储运,2011,30(03):180.[doi:10.6047/j.issn.1000-8241.2011.03.006]
　Li Huiduo,Liang Jinghua,Zhu Feng,et al.Mixing experiment and critical proportion calculation for contamination of products[J].Oil & Gas Storage and Transportation,2011,30(2):180.[doi:10.6047/j.issn.1000-8241.2011.03.006]
[6]牛迎战,刘甫,林猛,等.成品油长输管道盗油点抢修方法的应用[J].油气储运,2011,30(02):150.[doi:10.6047/j.issn.1000-8241.2011.02.019]
　Niu Yingzhan,Liu Fu,Lin Meng,et al.Application of the emergency repair method in leak point of products pipeline[J].Oil & Gas Storage and Transportation,2011,30(2):150.[doi:10.6047/j.issn.1000-8241.2011.02.019]
[7]林猛,牛迎战,张玲.EP减阻剂在抚顺－鲅鱼圈成品油管道的应用[J].油气储运,2011,30(05):350.[doi:10.6047/j.issn.1000-8241.2011.05.008]
　Lin Meng,Niu Yingzhan,Zhang Ling.Application of EP DRA in Fushun-Bayuquan Products Pipeline[J].Oil & Gas Storage and Transportation,2011,30(2):350.[doi:10.6047/j.issn.1000-8241.2011.05.008]
[8]朱峰,梁静华,李会朵,等.成品油混油切割与掺混试验[J].油气储运,2011,30(05):364.[doi:10.6047/j.issn.1000-8241.2001.05.013]
　Zhu Feng,Liang Jinghua,Li Huiduo,et al.Testing on contamination cut and blending for products[J].Oil & Gas Storage and Transportation,2011,30(2):364.[doi:10.6047/j.issn.1000-8241.2001.05.013]
[9]宋飞,朱峰,潘红梅,等.兰成渝管道杂质来源分析[J].油气储运,2010,29(5):381.[doi:10.6047/j.issn.1000-8241.2010.05.021]
　Song Fei,Zhu Feng,Pan Hongmei.Analysis on lmpurity Origin of Lanzhou-Chengdu-Chongqing Oil Product Pipeline[J].Oil & Gas Storage and Transportation,2010,29(2):381.[doi:10.6047/j.issn.1000-8241.2010.05.021]
[10]马红娜,李彦娥,武征.成品油管道泄漏的环境风险评价[J].油气储运,2011,30(11):801.[doi:10.6047/j.issn.1000-8241.2011.11.001]
　Ma Hongna,Li Yane,Wu Zheng.Environmental risk evaluation of leaked products pipeline[J].Oil & Gas Storage and Transportation,2011,30(2):801.[doi:10.6047/j.issn.1000-8241.2011.11.001]

备注/Memo

收稿日期:2002-6-12。
作者简介:韩志广,助理工程师,1973年生,1997年毕业于抚顺石油学院油气储运专业,2002年毕业于石油大学(北京)油气储运专业,获硕士学位,现在中国化工进出口总公司工作.102249,北京市西城区复兴门外大街A2号,电话:(010)88079270.

更新日期/Last Update: 1900-01-01