[1]张足斌 张淑丽 潘俐敏 王婷婷 李波.腐蚀缺陷管道剩余强度评价方法选择及应用[J].油气储运,2020,39(04):400-406.[doi:10.6047/j.issn.1000-8241.2020.04.006]
 ZHANG Zubin,ZHANG Shuli,PAN Limin,et al.Selection and application of assessment methods for residual strength of corroded pipelines[J].Oil & Gas Storage and Transportation,2020,39(04):400-406.[doi:10.6047/j.issn.1000-8241.2020.04.006]
点击复制

腐蚀缺陷管道剩余强度评价方法选择及应用

参考文献/References:

[1] 张足斌,王海琴,银永明. 油气管道与储罐设计[M]. 东营:中国 石油大学出版社,2012:418-454. ZHANG Z B,WANG H Q,YIN Y M. Oil & gas pipeline and storage tank design[M]. Dongying:China University of Petroleum Press,2012:418-454.
[2] KIEFNER J F,MAXEY W A,EIBER R J,DUFFY A R. Failure stress levels of flaws in pressurized cylinders[J]. Astm Special Technical Publication,1973(536):461-481.
[3] 何东升,郭简,张鹏. 腐蚀管道剩余强度评价方法及其应用[J]. 石油学报,2007,28(6):125-128. HE D S,GUO J,ZHANG P. Assessment method for remaining strength of corroded pipeline and its application[J]. Acta Petrolei Sinica,2007,28(6):125-128.
[4] 张振永,张金源,李朝,左思维. 油气管道腐蚀缺陷评估方法研 究综述[J]. 腐蚀与防护,2015,36(增刊1):43-46. ZHANG Z Y,ZHANG J Y,LI C,ZUO S W. Review on methods of assessment of corrosion defects of oil and gas pipeline[J]. Corrosion & Protection,2015,36(S1):43-46.
[5] 帅健,蔡强康,吕英民. 埋地输油管道的断裂失效概率评估[J]. 中国石油大学学报(自然科学版),2001,25(2):87-90. SHUAI J,CAI Q K,LYU Y M. Assessment on fracture failure probability of buried oil pipelines[J]. Journal of the China University of Petroleum( Natural Science),2001,25(2):87-90.
[6] 王文和,於孝春,沈士明. 含缺陷压力管道安全评定方法研究的 现状与发展[J]. 管道技术与设备,2007(2):1-3. WANG W H,YU X C,SHEN S M. Situation and development of the safety assessment methods for the pressure piping with defects[J]. Pipeline Technology and Equipment,2007(2):1-3.
[7] 闫凤霞,高惠临. 风险评估及其在油气管道方面的应用[J]. 石油 工业技术监督,2003,19(2):1-6. YAN F X,GAO H L. Risk analysis and its application in oil and gas pipelines[J]. Petroleum Industry Technical Supervision, 2003,19(2):1-6.
[8] 李智劳,宁晓周,闫云聚,屈康康. 基于应力概率分布的管道可 靠性分析方法研究[J]. 武汉理工大学学报,2010,32(9):72-75. LI Z L,NING X Z,YAN Y J,QU K K. Research on reliability analysis of pipelines based on stress probability distribution[J]. Journal of Wuhan University of Technology,2010,32(9):72-75.
[9] STEPHENS D R,LEIS B N. Development of an alternative criterion for residual strength of corrosion defects in moderate to high toughness pipe[C]. Calgary:ASME 2000 3rd International Pipeline Conference,2000:781-792.
[10] ZHOU W,HUANG G X. Model error assessment of burst capacity models for corroded pipelines[J]. International Journal of Pressure Vessels and Piping,2012,99/100:1-8.
[11] 张奕,高富超,杨锋平,王琴,张良,王珂. 含体积型缺陷油气 管道剩余强度评价标准对比分析研究[J]. 石油管材与仪器, 2016,2(4):30-34. ZHANG Y,GAO F C,YANG F P,WANG Q,ZHANG L, WANG K. Comparative study on standards of volume flaw remaining strength assessment for oil & gas transmission pipeline[J]. Petroleum Tubular Goods & Instruments,2016,2(4): 30-34.
[12] 张良,赵新伟,罗金恒,张广利. 含体积型缺陷钢管的剩余强度 计算与水压爆破试验验证[J]. 焊管,2013,36(5):29-33,37. ZHANG L,ZHAO X W,LUO J H,ZHANG G L. The confirmation of residual strength calculation in steel pipe with volume defects and hydraulic test[J]. Welded Pipe and Tube, 2013,36(5):29-33,37.
[13] 帅健,张春娥,陈福来. 基于爆破试验数据对腐蚀管道剩余强 度评定方法的验证[J]. 压力容器,2006,23(10):5-8. SHUAI J,ZHANG C E,CHEN F L. Validation of assessment method for remaining strength of corroded pipeline based on burst test data[J]. Pressure Vessel Technology,2006,23(10):5-8.
[14] CRONIN D S,PICK R J. Experimental database for corroded pipe:Evaluation of RSTRENG and B31G[C]. Calgary:2000 3rd International Pipeline Conference,2000:757-768.
[15] BENJAMIN A,VIEIRA R,FREIRE J,CASTRO J. Burst tests on pipeline with long external corrosion[C]. Calgary:2000 3rd International Pipeline Conference,2000:793-799.
[16] CRONIN D,ROBERTS K A,PICK R J. Assessment of long corrosion grooves in line pipe[C]. Calgary:1st International Pipeline Conference,1996:401-408.
[17] WOO S K,YOUNG P K,YOUNG T K. Full scale burst test and finite element analysis on corroded gas pipeline[C]. Calgary: 4th International Pipeline Conference,2002:1501-1508.
[18] 苗聚昌. 概率风险分析中蒙特卡洛方法的研究与应用[D]. 天 津:天津理工大学,2009:18-38. MIAO J C. Study and application on Monte Carlo method in probabilistic risk analysis[D]. Tianjin:Tianjin University of Technology,2009:18-38.
[19] 温凯,张文伟,宫敬,李恒东,张振永,赵博渊. 天然气管道可靠 性的计算方法[J]. 油气储运,2014,33(7):729-733. WEN K,ZHANG W W,GONG J,LI H D,ZHANG Z Y, ZHAO B Y. Computation of gas pipeline reliability[J]. Oil & Gas Storage and Transportation,2014,33(7):729-733.
[20] 王侨,谢禹钧,龚雪. 基于蒙特卡罗法管道失效概率的计算[J]. 辽宁石油化工大学学报,2012,32(2):67-69,73. WANG Q,XIE Y J,GONG X. Calculation of pipe failure probability based on Monte Carlo method[J]. Journal of Liaoning Shihua University,2012,32(2):67-69,73.
[21] 张文博. 可靠性数值模拟方法及其应用的研究[D]. 西安:西 北工业大学,2002:18-37. ZHANG W B. Reliability numerical simulation methods and its application[D]. Xi'an:Northwestern Polytechnical University, 2002:18-37.
[22] 段楠,薛会民,潘越. 用蒙特卡洛法计算可靠度时模拟次数的 选择[J]. 煤矿机械,2002(3):13-14. DUAN N,XUE H M,PAN Y. A method for determining the number realizations in the calculation of reliability by Monte Carlo simulation method[J]. Coal Mine Machinery,2002(3):13-14.
[23] 杨俊雷,刘瑞海. 结构可靠度计算方法综述[J]. 中国西部科技, 2011,10(22):35-36,50. YANG J L,LIU R H. Summary of calculation methods of structural reliability[J]. Science and Technology of West China,2011,10(22):35-36,50.
[24] 陈兆雄,吴明,谢飞,王丹,郭强,马菲. 腐蚀管道剩余强度的 评价方法及剩余寿命预测[J]. 机械工程材料,2015,39(5): 97-101,106. CHEN Z X,WU M,XIE F,WANG D,GUO Q,MA F. Residual strength evaluation methodology and residual life prediction of corroded pipeline[J]. Materials for Mechanical Engineering,2015,39(5):97-101,106.
[25] 谷坛,唐德志,王竹,陈宏健,解红军. 典型离子对碳钢CO2 腐 蚀的影响[J]. 天然气工业,2019,39(7):106-112. GU T,TANG D Z,WANG Z,CHEN H J,XIE H J. Effect of typical ions on the corrosion behavior of carbon steel in CO2 environment[J]. Natural Gas Industry,2019,39(7):106-112.
[26] 马钢,李俊飞,白瑞,戴政. 基于PCA-SVR 模型的油气管道剩 余强度预测[J]. 油气储运,2019,38(10):1119-1124. MA G,LI J F,BAI R,DAI Z. Prediction on the residual strength of oil and gas pipelines based on PCA-SVR model[J]. Oil & Gas Storage and Transportation,2019,38(10):1119-1124.
[27] 徐国贤,谢仁军,吴怡,殷启帅. 不同腐蚀缺陷套管剩余强度预 测方法研究[J]. 石油机械,2019,47(7):122-127. XU G X,XIE R J,WU Y,YAN Q S. Prediction method of residual strength of casing with different corrosion defects[J]. China Petroleum Machinery,2019,47(7):122-127.

相似文献/References:

[1]石磊,帅健,许葵.大型油罐基础沉降国内外评价标准对比[J].油气储运,2014,33(8):862.[doi:10.6047/j.issn.1000-8241.2014.08.013]
 SHI Lei,SHUAI Jian,XU Kui.Comparison of evaluation standards for large oil tank foundation settlement in China and abroad[J].Oil & Gas Storage and Transportation,2014,33(04):862.[doi:10.6047/j.issn.1000-8241.2014.08.013]
[2]韩银杉,张宏.走滑断层作用下管道应变解析计算方法的适用性[J].油气储运,2016,35(12):1329.[doi:10.6047/j.issn.1000-8241.2016.12.014]
 HAN Yinshan,ZHANG Hong.Applicability of analytical calculation methods on the pipeline strain under the effect of strike-slip fault[J].Oil & Gas Storage and Transportation,2016,35(04):1329.[doi:10.6047/j.issn.1000-8241.2016.12.014]
[3]张足斌 张淑丽 潘俐敏 王婷婷 李波.腐蚀缺陷管道剩余强度评估方法选择及应用[J].油气储运,2020,39(01):1.
 ZHANG Zubin,ZHANG Shuli,PAN Limin,et al.Selection and application of assessment methods for residual strength of corroded pipelines[J].Oil & Gas Storage and Transportation,2020,39(04):1.

备注/Memo

(收稿日期:2017-12-29;修回日期:2020-02-24;编辑:杜娟) 基金项目:中国石化中原油田科研项目“普光气田集输管道力学性能测试”,10250003-14-ZC0613-0006。作者简介:张足斌,男,1971 年生,副教授,2010 年博士毕业于中国石油大学(华东)油气储运工程专业,现主要从事油气管道强度评价相关教学与科研工作。地址:山东省青岛市黄岛区长江西路66 号,266580。电话:15092255963。Email:zhangzubin_1@163.com

更新日期/Last Update: 2020-04-25