分享
[1]管文涌 王新园 杨阔.站场ESD 系统触发回路可靠性及提升措施[J].油气储运,2019,38(10):1151-1158.[doi:10.6047/j.issn.1000-8241.2019.10.012]
 GUAN Wenyong,WANG Xinyuan,YANG Kuo.The reliability and improvement measures of trigger circuit of ESD system at gas transmission stations[J].Oil & Gas Storage and Transportation,2019,38(10):1151-1158.[doi:10.6047/j.issn.1000-8241.2019.10.012]
点击复制

站场ESD 系统触发回路可靠性及提升措施

参考文献/References:

[1] 孙腾,李效亚,杨柳. 过程工业领域的安全仪表系统功能安 全[J]. 仪器仪表标准化与计量,2018,31(1):11-14. SUN T,LI X Y,YANG L. Functional safety of safety instrument system in the field of process industry[J]. Instrument Standardization & Metrology,2018,31(1):11-14.
[2] 高铁军,赵明,毛亚纯.供水管网全网关阀预案与关键阀门分析[J]. 哈尔滨工业大学学报,2018,50(2):94-99. GAO T J,ZHAO M,MAO Y C. Analysis of valve closing schemes and key valves in water distribution networks[J]. Journal of Harbin Institute of Technology,2018,50(2):94-99.
[3] 盛锴,刘复平,刘武林,等. 汽轮机阀门流量特性对电力系统的 影响及其控制策略[J]. 电力系统自动化,2012,36(7):104-109. SHENG K,LIU F P,LIU W L,et al. Influence of steam turbine valve discharge characteristics on power systems and its control strategy[J]. Automation of Electric Power Systems,2012,36(7): 104-109.
[4] LAM C,ZHOU W X. Statistical analyses of incidents on onshore gas transmission pipelines based on PHMSA database[J]. International Journal of Pressure Vessels and Piping,2016,145: 29-40.
[5] 王书惠. ESD 按钮的选型探讨[J]. 自动化博览,2012,29(11): 84-86,95. WANG S H. Discussion on selection of ESD button[J]. Automation Panorama,2012,29(11):84-86,95.
[6] 黄燕,周密,黄卫星,等. 阀门故障分析及其分类[J]. 阀门,2007, 14(6):41-44. HUANG Y,ZHOU M,HUANG W X,et al. The valve failure analysis and classification[J]. Valve,2007,14(6):41-44.
[7] 彭结林,朱华炳,邝先进. 阀门密封的研究现状综述[J]. 机械制 造与自动化,2018,25(2):61-63,77. PENG J L,ZHU H B,KUANG X J. Review of research status of valve sealing[J]. Machine Building & Automation,2018,25(2): 61-63,77.
[8] 李效亚. 风险可接受标准的确定[J]. 仪器仪表标准化与计量, 2017,30(1):23-25,29. LI X Y. The determination of acceptance risk criteria[J]. Instrument Standardization & Metrology,2017,30(1): 23-25,29.
[9] 刘瑶,王虎. 危化品企业应急预案评估实践[J]. 仪器仪表标准化 与计量,2018,31(2):15-18. LIU Y,WANG H. Practice of assessment for contingency plan in hazardous chemicals production enterprises[J]. Instrument Standardization & Metrology,2018,31(2):15-18.
[10] 严密,管文涌,田家兴,等. 带诊断电阻的ESD 按钮选型分析[J]. 电气自动化,2015,37(6):111-113. YAN M,GUAN W Y,TIAN J X,et al. An analysis on model selection of ESD buttons with diagnosis resistor[J]. Electrical Automation,2015,37(6):111-113.
[11] 赵廉斌,朱金辉,张丽,等. 以Safety Manager 为控制核心的安全 仪表系统在输气站场中的可用性和可靠性探讨[J]. 化工自动化 及仪表,2014,41(11):1324-1327. ZHAO L B,ZHU J H,ZHANG L,et al. Investigation about the availability and reliability of the gas station in the safety instrument control system which named Safety Manager[J]. Control and Instruments in Chemical Industry,2014,41(11): 1324-1327.
[12] 姚安林,周立国,汪龙,等. 天然气长输管道地区等级升级管理 与风险评价[J]. 天然气工业,2017,37(1):124-130. YAO A L,ZHOU L G,WANG L,et al. Management and risk evaluation on long-distance gas pipelines related to regional level upgrading[J]. Natural Gas Industry,2017,37(1):124-130.
[13] LIANG W,HU J Q,ZHANG L B,et al. Assessing and classifying risk of pipeline third-party interference based on fault tree and SOM[J]. Engineering Applications of Artificial Intelligence:The International Journal of Intelligent Real-Time Automation,2012,25(3):594-608.
[14] SHI L,SHUAI J,XU K. Fuzzy fault tree assessment based on improved AHP for fire and explosion accidents for steel oil storage tanks[J]. Journal of Hazardous Materials,2014, 278(15):529-538.
[15] 贾爱林,郭建林. 智能化油气田建设关键技术与认识[J]. 石油 勘探与开发,2012,39(1):118-122. JIA A L,GUO J L. Key technologies and understandings on the construction of smart fields[J]. Petroleum Exploration and Development,2012,39(1):118-122.
[16] 祝华远,赵功伟,王文秀,等. 基于帕累托法则的平均修复时间 分析研究[J]. 航空维修与工程,2012,19(4):43-44. ZHU H Y,ZHAO G W,WANG W X,et al. Analysis and research about mean repair time based on Pareto principle[J]. Aviation Maintenance & Engineering,2012,19(4):43-44.
[17] 帅健,单克. 基于失效数据的油气管道定量风险评价方法[J]. 天然气工业,2018,38(9):129-138. SHUAI J,SHAN K. A quantitative risk assessment method for oil and gas pipelines based on failure data[J]. Natural Gas Industry,2018,38(9):129-138.
[18] 刘瑶. 保护层分析(LOPA)的复合场景分析研究与工程实 践[J]. 仪器仪表标准化与计量,2017,30(5):19-23. LIU Y. Research and engineering practice of multiple scenario analysis in layer of protection analysis(LOPA)[J]. Instrument Standardization & Metrology,2017,30(5):19-23.
[19] 史学玲. 功能安全认证过程中对诊断的判别、计算与测试[J]. 仪器仪表标准化与计量,2009,22(1):15-17,22. SHI X L. Judgement,calculation and test for diagnosis in the process of functional safety assessment[J]. Instrument Standardization & Metrology,2009,22(1):15-17,22.
[20] 王景军. 电动阀门手动操作的常见问题及其解决措施[J]. 流体 机械,2018,46(3):42-46. WANG J J. The common problems of electric valve manual operation and its solutions[J]. Fluid Machinery,2018,46(3): 42-46.
[21] 王琼. 气体阀门内漏在线监测系统研发与应用[J]. 安全、健康 和环境,2018,25(7):9-12. WANG Q. Research of gas valve inner leakage online monitoring system and its application[J]. Safety Health & Environment,2018,25(7):9-12.
[22] 张荣伟,鲁建明,叶挺挺. 阀门泄漏故障特征量提取技术及其 工程应用[J]. 阀门,2018,25(6):29-32. ZHANG R W,LU J M,YE T T. The technology of feature extraction of valve leakage fault and its engineering application[J]. Valve,2018,25(6):29-32.
[23] 林伟国,吴石恩. 阀门内漏声波监测及其信号特征提取方法[J]. 振动与冲击,2018,37(9):120-126. LIN W G, WU S E. Acoustic monitoring and signal feature extraction for valve internal leakage[J]. Journal of Vibration and Shock,2018,37(9):120-126.
[24] P R A T E E P A S E N A ,K A EWWA EWN O I W , KAEWTRAKULPONG P. Smart portable noninvasive instrument for detection of internal air leakage of a valve using acoustic emission signals[J]. Measurement,2011,2(2):378-384.
[25] 管文涌. 基于部分行程测试法的在役电动阀设计与改造[J]. 仪 器仪表标准化与计量,2017,30(1):32-36. GUAN W Y. The design and modification of the electric valve in service based on the method of partial stroke testing[J]. Instrument Standardization & Metrology,2017,30(1):32-36.
[26] 戴富林,吴晓. 电液(伺服)执行器在阀门上的应用[J]. 阀门, 2018,25(6):21-24. DAI F L,WU X. The application of electronic-hydraulic(servo) actuators to the valves[J]. Valve,2018,25(6):21-24.
[27] 施隋靖,刘瑶. 煤制甲醇工艺中功能安全评估的研究与应用[J]. 仪器仪表标准化与计量,2018,31(6):12-16,29. SHI S J,LIU Y. The research and application of functional safety assessment on coal-to-methanol technology[J]. Instrument Standardization & Metrology,2018,31(6):12-16,29.
[28] 史威,熊文泽. 过程工业安全仪表系统离线检验测试浅析[J]. 仪器仪表标准化与计量,2015,28(3):20-23. SHI W,XIONG W Z. Analysis of off-line proof test in safety instrumented system for process sector[J]. Instrument Standardization & Metrology,2015,28(3):20-23.

相似文献/References:

[1]胡镁林,黄坤,吴晓南.基于D-S证据理论的天然气管道可靠性评价[J].油气储运,2011,30(07):490.[doi:10.6047/j.issn.1000-8241.2011.07.003]
 Hu Meilin,Huang Kun,Wu Xiaonan.The gas pipeline reliability analysis based on D-S evidence theory[J].Oil & Gas Storage and Transportation,2011,30(10):490.[doi:10.6047/j.issn.1000-8241.2011.07.003]
[2]康叶伟,林明春,王维斌,等.罐底板声发射在线检测影响因素与评价可靠性[J].油气储运,2011,30(05):343.[doi:10.6047/j.issn.1000-8241.2011.05.006]
 Kang Yewei,Lin Mingchun,Wang Weibin,et al.Influencing factors of acoustic emission technique and evaluation reliability in inspection of tank floor[J].Oil & Gas Storage and Transportation,2011,30(10):343.[doi:10.6047/j.issn.1000-8241.2011.05.006]
[3]刘楠,张宏旺1,李钟全,等.矩形储液箱静水压模态仿真分析与材料比选[J].油气储运,2011,30(11):837.[doi:10.6047/j.issn.1000-8241.2011.11.011]
 Liu Nan,Zhang Hongwang,Li Zhongquan,et al.The modal simulation of hydrostatic pressure and comparison of material for rectangle storage box[J].Oil & Gas Storage and Transportation,2011,30(10):837.[doi:10.6047/j.issn.1000-8241.2011.11.011]
[4]黄小光,韩忠英.海底管道疲劳损伤与疲劳寿命的可靠性计算[J].油气储运,2010,29(11):827.[doi:10.6047/j.issn.1000-8241.2010.11.007]
 Huang Xiaoguang,Han Zhongying.Reliability Calculation of Fatigue Damage and Fatigue Life of Submarine Pipeline[J].Oil & Gas Storage and Transportation,2010,29(10):827.[doi:10.6047/j.issn.1000-8241.2010.11.007]
[5]郭章林,王勇华,李富梅.城市燃气管道检测周期研究[J].油气储运,2009,28(3):25.[doi:10.6047/j.issn.1000-8241.2009.03.008]
 GUO Zhanglin,WANG Yonghua.Study on Inspection Cycles of City Gas Pipelines[J].Oil & Gas Storage and Transportation,2009,28(10):25.[doi:10.6047/j.issn.1000-8241.2009.03.008]
[6]陈志平,曾明,余雏麟,等.大型油罐应力分析与屈曲稳定性研究[J].油气储运,2008,27(12):7.[doi:10.6047/j.issn.1000-8241.2008.12.003]
 CHEN Zhiping,ZENG Ming.A Research on Stress Analysis and Bulking Reliability of Large Oil Storage Tank[J].Oil & Gas Storage and Transportation,2008,27(10):7.[doi:10.6047/j.issn.1000-8241.2008.12.003]
[7]余建星,王磊,侯国华.海底管跨涡激振动疲劳可靠性研究[J].油气储运,2004,23(7):25.[doi:10.6047/j.issn.1000-8241.2004.07.008]
 YU Jianxing,WANG Lei.Reliability Research on Fatigue Caused By Vortex Induced Vibration of Submarine Pipeline Span[J].Oil & Gas Storage and Transportation,2004,23(10):25.[doi:10.6047/j.issn.1000-8241.2004.07.008]
[8]陈俊,张劲军,李鸿英.含蜡原油粘度预测模型的可靠性分析[J].油气储运,2003,22(12):16.[doi:10.6047/j.issn.1000-8241.2003.12.003]
 CHEN Jun,ZHANG Jinjun.Reliability Analysis of the Viscosity Pr edicting Model for Waxy Crudes[J].Oil & Gas Storage and Transportation,2003,22(10):16.[doi:10.6047/j.issn.1000-8241.2003.12.003]
[9]聂廷哲,段常贵.天然气长输管道可靠性故障树模糊分析[J].油气储运,2003,22(6):44.[doi:10.6047/j.issn.1000-8241.2003.06.009]
 NIE Tingzhe,DUAN Changgui.Natural Gas Pipeline Systems Design Based on Fuzzy Decision[J].Oil & Gas Storage and Transportation,2003,22(10):44.[doi:10.6047/j.issn.1000-8241.2003.06.009]
[10]汪涛,张鹏,刘刚.城市天然气管网运行的可靠性分析[J].油气储运,2003,22(3):15.[doi:10.6047/j.issn.1000-8241.2003.03.004]
 WANG Tao,ZHANG Peng.Analysis on the Safety and Reliability of City Gas Pipeline Network[J].Oil & Gas Storage and Transportation,2003,22(10):15.[doi:10.6047/j.issn.1000-8241.2003.03.004]

备注/Memo

基金项目:国家青年科学基金资助项目“云制造服务平台运行过程控制理论及方法研究”,51705438。
作者简介:管文涌,男,1985 年生,工程师,2011 年毕业于西北工业大学自动化学院自动化专业,现主要从事天然气长输管道自动化相关技术的研究工作。地址:湖北省武汉市洪山区雄楚大道977 号,430073。电话:021-58847246。Email:guanwenyong@ petrochina.com.cn
编辑:张雪琴

更新日期/Last Update: 2019-10-25