分享
[1]李振北 尤杰 程汉华 荆睿 王馨饶.管径508 mm 单节双封型内封堵器结构设计及封堵性能[J].油气储运,2019,38(09):1065-1071.[doi:10.6047/j.issn.1000-8241.2019.09.016]
 LI Zhenbei,YOU Jie,CHENG Hanhua,et al.Structural design and plugging performance of 508 mm single-section double-seal internal plugging device[J].Oil & Gas Storage and Transportation,2019,38(09):1065-1071.[doi:10.6047/j.issn.1000-8241.2019.09.016]
点击复制

管径508 mm 单节双封型内封堵器结构设计及封堵性能

参考文献/References:

[1] 张仕民,谭桂斌,朱霄霄,等. 油气管道维抢修技术进展[J]. 石油 机械,2011,39(10):174-178. ZHANG S M,TAN G B,ZHU X X,et al. Development of repair technology for oil and gas pipeline[J]. China Petroleum Machinery,2011,39(10):174-178.
[2] 马明,赵弘,苏鑫,等. 油气管道封堵抢修技术发展现状与展望[J]. 石油机械,2014,42(6):109-112,118. MA M,ZHAO H,SU X,et al. The current development status and prospect of oil and gas pipeline plugging and emergency repair technology[J]. China Petroleum Machinery,2014,42(6): 109-112,118.
[3] 赵宏林,房晓明,张宏,等. 海底管道干式维修用封堵器的设 计[J]. 石油机械,2005,33(12):21-23. ZHAO H L,FANG X M,ZHANG H,et al. Design of a plug used for dry maintenance of subsea pipelines[J]. China Petroleum Machinery,2005,33(12):21-23.
[4] 张仕民,梅旭涛,王国超,等. 油气管道维抢修方法及技术进展[J]. 油气储运,2014,33(11):1180-1186. ZHANG S M,MEI X T,WANG G C,et al. Oil/gas pipeline maintenance and emergency repair method and its progress[J]. Oil & Gas Storage and Transportation,2014,33(11):1180-1186.
[5] 张行,张仕民,张策,等. 1 016 mm 管道球状双封封堵器的结构 设计及封堵能力[J]. 油气储运,2014,33(10):1108-1112. ZHANG H,ZHANG S M,ZHANG C,et al. Structural designand plugging capacity of globular double-plugging plug in 1 016 mm pipeline[J]. Oil & Gas Storage and Transportation, 2014,33(10):1108-1112.
[6] 樊文斌,罗自治,张策. 管内高压封堵器的研制[J]. 油气储运, 2011,30(8):657-659. FAN W B,LUO Z Z,ZHANG C. Development of highpressure pipeline isolation plug[J]. Oil & Gas Storage and Transportation,2011,30(8):657-659.
[7] ZHANG K,ZHANG S M,ZHU X X,et al. Study on the new pipeline maintenance technology based on the smart plugging technique[J]. China Petroleum Machinery,2017,45(1):114-119.
[8] PARROTT R,TVEIT E. Onshore,offshore use of high-pressure pipeline isolation plugs for operating pipeline construction, maintenance[J]. Pipeline & Gas Journal,2005,232(1):30-35.
[9] 王焱,张仕民,张行,等.Φ1016 mm 油气管道管内智能封堵器的 设计[J]. 管道技术与设备,2015(1):27-29,48. WANG Y,ZHANG S M,ZHANG H,et al. Design of intelligent plugging device in Φ1016 mm oil and gas pipelines[J]. Pipeline Technique and Equipment,2015(1):27-29,48.
[10] 樊文斌,张仕民. 管内高压智能封堵器设计[J]. 石油机械, 2008,36(9):213-215. FAN W B,ZHANG S M. Design of high-pressure intelligent plugging[J]. China Petroleum Machinery,2008,36(9): 213-215.
[11] 刘华洁,张策,张仕民,等. 管内高压智能封堵机器人[J]. 石油 机械,2013,41(6):113-118. LIU H J,ZHANG C,ZHANG S M,et al. The in-tube pressurized intelligent plugging robot[J]. China Petroleum Machinery,2013,41(6):113-118.
[12] 刘毅军,李艳丽. 欧盟天然气产业链结构改革后管输管理新模 式[J]. 油气储运,2015,34(1):1-7,14. LIU Y J,LI Y L. A new mode of pipeline transportation management after structural reform of EU natural gas industrial chains[J]. Oil & Gas Storage and Transportation,2015,34(1): 1-7,14.
[13] 张行,王焱,张仕民,等. 清管器密封皮碗力学特性的有限元分 析[J]. 油气储运,2015,34(11):1225-1230. ZHANG H,WANG Y,ZHANG S M,et al. Finite-element analysis on mechanical properties of sealing disc for pig[J]. Oil & Gas Storage and Transportation,2015,34(11):1225-1230.
[14] 王云学,许仁波,孟奇龙,等. 压缩式封隔器胶筒接触力学行为有限元分析[J]. 武汉科技大学学报,2017,40(1):61-64. WANG Y X,XU R B,MENG Q L,et al. Mechanical behaviors of contact of compressive packer’s rubber sleeve:a finite element analysis[J]. Journal of Wuhan University of Science and Technology,2017,40(1):61-64.
[15] 刘鸿文. 材料力学[M]. 北京:高等教育出版社,2011:236-240. LIU H W. Materials mechanics[M]. Beijing:Higher Education Press,2011:236-240.
[16] KRISTON A,F?L?P T,ISITMAN N A,et al. A novel method for contact analysis of rubber and various surfaces using micro-computerized-tomography[J]. Polymer Testing,2016,53: 132-142.
[17] AMINO N,ISHIKAWA Y,TAKEUCHI M. Analysis of contact states between rubber and mated surface using X-ray imaging method[J]. Nippon Gomu Kyokaishi,2011,84(4): 117-123.
[18] 张劲,李炜,张士诚. 封隔器超弹性胶筒力学性能的试验研 究[J]. 机械工程学报,2011,47(8):71-76. ZHANG J,LI W,ZHANG S C. Experimental study on mechanics properties of rubber for packer sleeve[J]. Journal ofMechanical Engineering,2011,47(8):71-76.
[19] 李世芸,肖正明. 弹性力学及有限元[M]. 北京:机械工业出版 社,2016:120-124. LI S Y,XIAO Z M. Elastic mechanics and finite element method[M]. Beijing:Mechanical Industry Press,2016:120-124.
[20] 江华生,孟祥铠,沈明学,等. 油封唇口静态接触特性的有限元 分析[J]. 润滑与密封,2016,41(10):57-61. JIANG H S,MENG X K,SHEN M X,et al. Finite element analysis of static contact properties for oil sealing lip[J]. Lubrication Engineering,2016,41(10):57-61.

相似文献/References:

[1]李振北 张菊 荆睿 何肖宁 胡铁华.管内封堵器橡胶筒长度对封堵性能的影响 [J].油气储运,2019,38(03):1.
 LI Zhenbei,ZHANG Ju,JING Rui,et al.The effect of the rubber tube length of in-pipe occluder on the plugging performance[J].Oil & Gas Storage and Transportation,2019,38(09):1.
[2]李振北 尤杰 程汉华 荆睿 王馨饶.管径508 mm单节双封型内封堵器结构设计及封堵性能[J].油气储运,2019,38(06):1.
 LI Zhenbei,YOU Jie,CHENG Hanhua,et al.Structural design and plugging performance of 508 mm single-section double-seal internal plugging device[J].Oil & Gas Storage and Transportation,2019,38(09):1.
[3]李振北 张菊荆睿何肖宁胡铁华孟祥鹏.管内封堵器橡胶筒长度对封堵性能的影响[J].油气储运,2019,38(07):810.[doi:10.6047/j.issn.1000-8241.2019.07.015]
 LI Zhenbei,ZHANG Ju,JING Rui,et al.The effect of the rubber tube length of in-pipe occluder on the plugging performance[J].Oil & Gas Storage and Transportation,2019,38(09):810.[doi:10.6047/j.issn.1000-8241.2019.07.015]

备注/Memo

基金项目:国家重点研发计划专项课题“油气长输管道及储运设施检验评价与安全保障技术”,2016YFC0802100。
作者简介:李振北,男,1986 年生,工程师,2012 年硕士毕业于西南石油大学机械电子工程专业,现主要从事管道内检测技术与装备的研发与应用研究工作。地址:河北省廊坊市广阳区爱民东道166 号中油管道检测技术有限责任公司,065000。电话:0316-2071672。Email:lizhenbei1986@126.com
编辑:杜娟

更新日期/Last Update: 2019-09-25