分享
[1]杨专钊,王高峰,刘迎来,等.小半径热煨弯管加工工艺与截面畸变的相关性[J].油气储运,2019,38(03):338-344.[doi:10.6047/j.issn.1000-8241.2019.03.016]
 YANG Zhuanzhao,WANG Gaofeng,LIU Yinglai,et al.Correlation between processing technology and cross-sectional distortion of small-radius hot-bending bend[J].Oil & Gas Storage and Transportation,2019,38(03):338-344.[doi:10.6047/j.issn.1000-8241.2019.03.016]
点击复制

小半径热煨弯管加工工艺与截面畸变的相关性

参考文献/References:

[1] 张监,王勋,李哲,等 .国内外输气管廊带的建设与运行[J].油气储运,2015,34(9):919-923.
ZHANG J,WANG X,LI Z,et al.Construction and operation of gas pipeline corridor worldwide[J].Oil & Gas Storage and Transportation,2015,34(9):919-923.
[2] 李艳华,杨俊伟,王炜.热煨弯管在大口径管道中的应用[J].油气储运,2002,21(7):49-51.
LI Y H,YANG J W,WANG W.The application of hot-bending bend in large diameter pipeline[J].Oil & Gas Storage and Transportation,2002,21(7):49-51.
[3] 顾煜炯,姚健.小半径弯管在我国电力管件中的重要地位[J].金属成型工艺,1994(6):291-293.
GU Y J,YAO J.The important position of small-radius pipe-bender in power pipework in China[J].Metal Forming Technology,1994(6):291-293.
[4] 鄂大辛,宁汝新,胡新平,等.管材弯曲中壁厚变化引起横截面畸变的试验研究[J].航空制造技术,2005(12):60-63.
E D X,NING R X,HU X P,et al.Experimental study of the change of wall thickness causing the distortion of cross-section in process of tube bending[J].Aeronautical Manufacturing Technology,2005(12):60-63.
[5] TANG N C.Plastic-deformation analysis in tube bending[J].International Journal of Pressure Vessels & Piping,2000,77(12): 751-759.
[6] 鄂大辛,宁汝新,古涛.弯管横截面畸变的试验与分析[J].兵工学报,2006,27(4):698-701.
E D X,NING R X,GU T.Experiment and analysis on the distortion of cross-section of bended-tube[J].Acta Armamentarii,2006,27(4):698-701.
[7] 顾煜炯,姚健,周兆英,等.感应加热小半径金属弯管成型的机理研究[J].金属学报,1994,30(24):543-548.
GU Y J,YAO J,ZHOU Z Y,et al.Formation mechanism of metal pipe-bend with small bending radius under induction heating[J].Acta Metallrugica Sinica,1994,30(24):543-548.
[8] 胡忠,夏福清.中频感应局部加热弯管的回弹理论分析和试验研究[J].固体力学学报,1998,19(4):329-335.
HU Z,XIA F Q.Theoretical analysis and experimental study of springback of pipe bending using induction heating[J].Acta Mechanica Solida Sinica,1998,19(4):329-335.
[9] JI L K,ZHENG M,CHEN H Y,et al.Apparent strain of a pipe at plastic bending buckling state[J].Journal of the Brazilian Society of Mechanical Sciences & Engineering,2015,37(6): 1811-1818.
[10] GUO X,JIN K,WANG H,et al.Numerical simulations and experiments on fabricating pipe bends by push bending with local induction-heating process[J].The International Journal of Advanced Manufacturing Technology,2016,84(9):2689-2695.
[11] MICHAEL T C,VEERAPPAN A,SHANMUGAM S.Effect of ovality and variable wall thickness on collapse loads in pipe bends subjected to in-plane bending closing moment[J].Engineering Fracture Mechanics,2012,79:138-148.
[12] ZARRABI K,KWOK F K.Reference stresses for cold-tube?bends including thickness variation and ovality using three-dimensional finite element method[C].Prague:ASME 2009 Pressure Vessels and Piping Conference,2009:169-174.
[13] TAN F X,LI M Z,CAI Z Y.Research on the process of multi-point forming for the customized titanium alloy cranial prosthesis[J].Journal of Materials Processing Technology, 2007,187(4):453-457.
[14] 刘启骞,付文智,李明哲,等.管材多点成形过程中壁厚减薄的数值模拟[J].塑性工程学报,2011,18(2):13-17.
LIU Q Q,FU W Z,LI M Z,et al.Numerical simulation of wall thinning in the process of multi-point forming for tube[J].Journal of Plasticity Engineering,2011,18(2):13-17.
[15] 彭赫力,李明哲,付文智,等.矩形管多点弯曲成形截面畸变的影响因素研究[J].华中科技大学学报(自然科学版),2012, 40(5):29-32.
PENG H L,LI M Z,FU W Z,et al.Factors in?uence on section distortion of multi-point bend forming in rectangular tube[J].Journal of Huazhong University of Science and Technology(Natural Science Edition),2012,40(5):29-32.
[16] 刘郁丽,杨合,崔姗姗,等.薄壁矩形管弯曲过程截面畸变的三维有限元分析[J].塑性工程学报,2007,14(3):72-75.
LIU Y L,YANG H,CUI S S,et al.3-D FEM analysis of section distortion in bending process of the thin-walled rectangular tube[J].Journal of Plasticity Engineering,2007, 14(3):72-75.
[17] PAULSEN F,WELO T.Cross-sectional deformations of rectangular hollow sections in bending:Part I-experiments[J].International Journal of Mechanical Sciences,2001,43(1): 109-129.
[18] 张正龙.螺旋埋弧焊管焊缝两侧圆度的分析[J].焊管, 2004, 27(1):36-37.
ZHANG Z L.Roundness analysis in both sides of weld seam in spirally submerged arc welded pipe[J].Welded Pipe and Tube, 2004,27(1):36-37.
[19] 闫光宁.双金属复合管现场焊接施工的质量控制分析[J].石油工程建设,2018,44(4):80-83.
YAN G N.Quality control analysis of ?eld welding of bimetal composite pipes[J].Petroleum Engineering Construction,2018, 44(4):80-83.

相似文献/References:

[1]史航,及立民.如何减少长输管道热煨弯管用量[J].油气储运,2002,21(9):38.[doi:DOI:10.6047/j.issn.1000-8241.2002.09.012]
 SHI Hang,JI Limin.The Necessity to Decrease Using Hot-bending Bend in Long Distance Pipeline[J].Oil & Gas Storage and Transportation,2002,21(03):38.[doi:DOI:10.6047/j.issn.1000-8241.2002.09.012]

备注/Memo

基金项目:陕西省科技新星项目“大口径管材小半径无模热弯截面质量预测与缺陷控制”,2015KJXX-73。 作者简介:杨专钊,男,1979年生,高级工程师, 2013年博士毕业于西北工业大学材料学专业,现主要从事油气输送管道工程管材研究与工程咨询工作。地址:陕西省西安市锦业 2路 89号 A415, 710077。电话:13609183975。Email:yangzhuanzhao@cnpc.com.cn

更新日期/Last Update: 2019-03-20