[1]李欣泽.成品油管道的混油长度计算方法[J].油气储运,2015,34(5):497-499.[doi:10.6047/j.issn.1000-8241.2015.05.008]
 LI Xinze.Calculation method for length of oil mixtures in product pipelines[J].Oil & Gas Storage and Transportation,2015,34(5):497-499.[doi:10.6047/j.issn.1000-8241.2015.05.008]
点击复制

成品油管道的混油长度计算方法

参考文献/References:

[1] 唐海燕, 徐舜华.顺序输送成品油管道混油量计算公式对比[J].油气储运, 2007, 26(10):25-27.
TANG H Y, XU S H. Comparison to contaminated volume calculation formulas of batch transportation pipeline[J]. Oil & Gas Storage and Transportation, 2007, 26(10):25-27.
[2] 宫敬, 王琴, 王卫东, 等.成品油管道的混油计算方法研究[J].管道技术与设备, 2013(1):1-3.
GONG J, WANG Q, WANG W D, et al. Study of the calculation method for mixing volume in products pipeline[J]. Pipeline Technology and Equipment, 2013(1):1-3.
[3] 杨莜蘅.输油管道设计与管理[M].东营:中国石油大学出版社, 2006.
YANG X H. Pipeline design and management[M]. Dongying: China University of Petroleum Press, 2006.
[4] 付英.成品油长输管道顺序输送离线模拟[J].德州学院学报, 2003(2):53-57.
FU Y. Off-line simulation of the batching products in long-distance pipeline[J]. Journal of Dezhou University, 2003(2):53-57.
[5] 梁永图.西南成品油管道输送模拟软件[J].油气储运, 2006, 25(6):11-14.
LIANG Y T. The development of simulation software for South-West Multi-product Pipeline operation[J]. Oil & Gas Storage and Transportation, 2006, 25(6):11-14.
[6] 徐燕萍.长输成品油管道混油的变化趋势研究[J].科技资讯, 2009(11):102-103.
XU Y P. Research on the change trend of long distance pipeline mix oil[J]. Science & Technology Information, 2009(11):102-103.
[7] 耿德江, 王岳, 马海峰, 等.铁岭-康乐原油顺序输送混油界面的跟踪及混油长度的计算[J].管道技术与设备, 2008(5):9-10.
GEN D J, WANG Y, MA H F, et al. Tracking of the Tieling-Kangle batching interface tracking and calculation of the length of the mixed oil of batch transportation of crude oil[J]. Pipeline Technology and Equipment, 2008(5):9-10.
[8] 郑瑜, 赵会军, 赵书华.顺序输送汽油与柴油混油回掺试验[J].油气储运, 2008, 27(5):32-34.
ZHENG Y, ZHAO H J, ZHAO S H. A study on diesel and gasoline mixture in batch transportation process[J]. Oil & Gas Storage and Transportation, 2008, 27(5):32-34.
[9] 桑广世, 孙宇, 朱坤峰, 等.成品油管道批次/批量和各站库容的计算[J].油气储运, 2000, 19(2):16-19.
SANG G S, SUN Y, ZHU K G, et al. Calculations of the batch cycles/batch volume and tank capacity for the products pipeline[J]. Oil & Gas Storage and Transportation, 2000, 19(2):16-19.

相似文献/References:

[1]宋晓琴,熊柯杰,朱建平,等.成品油携水特性对管道内腐蚀的影响[J].油气储运,2015,34(8):834.[doi:10.6047/j.issn.1000-8241.2015.08.007]
 SONG Xiaoqin,XIONG Kejie,ZHU Jianping,et al.Influence of water carrying capacity of oil products on internal corrosion of pipelines[J].Oil & Gas Storage and Transportation,2015,34(5):834.[doi:10.6047/j.issn.1000-8241.2015.08.007]
[2]于达 谢萍 黄忠胜 胡晓蓉. 对我国成品油管道建设的几点思考[J].油气储运,2014,33(1):1.[doi:10.6047/j.issn.1000-8241.2014.01.001]
 YU Da,XIE Ping,HUANG Zhongsheng,et al.Several considerations on products pipeline construction in China[J].Oil & Gas Storage and Transportation,2014,33(5):1.[doi:10.6047/j.issn.1000-8241.2014.01.001]
[3]蒋连生,王帅,张志军,等.成品油管道混油拖尾对切割浓度的影响[J].油气储运,2014,33(8):848.[doi:10.6047/j.issn.1000-8241.2014.08.010]
 JIANG Liansheng,WANG Shuai,ZHANG Zhijun,et al.Effects of mixed oil tailing of products pipeline on cutting concentration[J].Oil & Gas Storage and Transportation,2014,33(5):848.[doi:10.6047/j.issn.1000-8241.2014.08.010]
[4]洪诗定 高松标 蔡欣 詹柯 唐顺东 张青.成品油管道动态库存量智能计算系统[J].油气储运,2016,35(预出版):1.
 HONG Shiding,GAO Songbiao,CAI Xin,et al.Intelligent system to compute the dynamic inventory of products pipeline[J].Oil & Gas Storage and Transportation,2016,35(5):1.
[5]范立华,公茂柱,张佳.抚锦成品油管道不同注入方案比选[J].油气储运,2015,34(3):319.[doi:10.6047/j.issn.1000-8241.2015.03.020]
 FAN Lihua,GONG Maozhu,ZHANG Jia.Comparison of injection schemes for Fushun-Jinzhou Oil Products Pipeline[J].Oil & Gas Storage and Transportation,2015,34(5):319.[doi:10.6047/j.issn.1000-8241.2015.03.020]
[6]王中良,殷炳纲,孙法峰,等.兰成渝管道油品质量指标衰减规律[J].油气储运,2015,34(4):391.[doi:10.6047/j.issn.1000-8241.2015.04.010]
 WANG Zhongliang,YIN Binggang,SUN Fafeng,et al.The rule of reduction of quality indicators of oil through Lanzhou- Chengdu-Chongqing Pipeline[J].Oil & Gas Storage and Transportation,2015,34(5):391.[doi:10.6047/j.issn.1000-8241.2015.04.010]
[7]李欣泽.基于SPS软件的肯尼亚1号线成品油管道水击分析[J].油气储运,2015,34(6):604.[doi:10.6047/j.issn.1000-8241.2015.06.008]
 LI Xinze.Water hammer analysis of Kenya No.1 Products Pipeline based on SPS software[J].Oil & Gas Storage and Transportation,2015,34(5):604.[doi:10.6047/j.issn.1000-8241.2015.06.008]
[8]洪诗定,秦朝葵,高松标,等.成品油管道动态库存量智能计算系统[J].油气储运,2016,35(5):513.[doi:10.6047/j.issn.1000-8241.2016.05.012]
 HONG Shiding,QIN Chaokui,GAO Songbiao,et al.Intelligent system to compute the dynamic inventory of products pipeline[J].Oil & Gas Storage and Transportation,2016,35(5):513.[doi:10.6047/j.issn.1000-8241.2016.05.012]
[9]陈海宏 左丽丽 吴长春 刘鸣 王莉 刁逢.批次需求型成品油管道批次计划优化[J].油气储运,2018,37(预出版):1.
 CHEN Haihong,ZUO Lili,WU Changchun,et al.Optimization of the batch scheduling of product pipeline based on the batch-demand mode[J].Oil & Gas Storage and Transportation,2018,37(5):1.
[10]张雪琴 段志刚 梁永图 江新星.成品油管道顺序输送瞬态模拟算法[J].油气储运,2016,35(预出版):1.
 ZHANG Xueqin,DUAN Zhigang,LIANG Yongtu,et al.A new algorithm for transient simulation of batch transportation in products pipelines[J].Oil & Gas Storage and Transportation,2016,35(5):1.

备注/Memo

收稿日期:2014-3-23;改回日期:2015-3-2。
作者简介:李欣泽, 助理工程师, 1987年生, 2010年毕业于中国石油大学(北京)油气储运工程专业, 现主要从事长距离油气管道输送工艺的设计工作。Tel: 18654626607, Email: slecclxz@sina.com

更新日期/Last Update: 1900-01-01