[1]冯庆善,倪敬金.裂纹内检测技术应用于管道螺旋焊缝的可行性分析[J].油气储运,2009,28(11):45-46.[doi:DOI:10.6047/j.issn.1000-8241.2009.11.011]
 FENG Qingshan,NI Jingjin.Feasibility Analysis of Internal Detection Technology for Crack in Spiral Seam Pipeline[J].Oil & Gas Storage and Transportation,2009,28(11):45-46.[doi:DOI:10.6047/j.issn.1000-8241.2009.11.011]
点击复制

裂纹内检测技术应用于管道螺旋焊缝的可行性分析

相似文献/References:

[1]刘悦,孟贺学.油气管道裂纹评价方法[J].油气储运,2010,29(9):660.[doi:10.6047/j.issn.1000-8241.2010.09.005]
 Liu Yue,Meng Hexue.Crack Evaluation Method of Oil & Gas Pipelines[J].Oil & Gas Storage and Transportation,2010,29(11):660.[doi:10.6047/j.issn.1000-8241.2010.09.005]
[2]帅健,许葵.裂纹管道失效评定中的有限元方法[J].油气储运,2003,22(3):18.[doi:10.6047/j.issn.1000-8241.2003.03.005]
 SHUAI Jian,XU Kui.Finite Element Method of Failure Assessment of Cracked Pipe[J].Oil & Gas Storage and Transportation,2003,22(11):18.[doi:10.6047/j.issn.1000-8241.2003.03.005]
[3]朱春鸣,陈宏达,赵新伟,等.含360°表面裂纹管道剩余强度评价[J].油气储运,2001,20(9):41.[doi:10.6047/j.issn.1000-8241.2001.09.011]
 Zhu Chunming,Chen Hongda.The Remaining Strength Assessment of Pipeline Containing 360°Cir-cumferential Surface Crack[J].Oil & Gas Storage and Transportation,2001,20(11):41.[doi:10.6047/j.issn.1000-8241.2001.09.011]
[4]董绍华,吕英民.管道裂纹的随机有限元可靠性研究[J].油气储运,1999,18(10):21.[doi:10.6047/j.issn.1000-8241.1999.10.006]
 Dong Shaohua,LüYingmin.The Research of Reliability on the Pipeline Cracks by Stochastic Finite Element[J].Oil & Gas Storage and Transportation,1999,18(11):21.[doi:10.6047/j.issn.1000-8241.1999.10.006]
[5]吕英民,蒋云.含裂纹管道承压能力的评定[J].油气储运,1998,17(12):21.[doi:10.6047/j.issn.1000-8241.1998.12.007]
 Lu Yingmin,Jiang Yun.Evaluation to pressure bearing capability of cracked pipeline[J].Oil & Gas Storage and Transportation,1998,17(11):21.[doi:10.6047/j.issn.1000-8241.1998.12.007]
[6]薛正林,刘觉非,黄烈勇,等.管道对接环焊缝裂纹的防治措施[J].油气储运,2005,24(7):51.[doi:10.6047/j.issn.1000-8241.2005.07.015]
 XUE Zhenglin,LIU Juefei.Solution to the Cracks of Girth Welding of Pipeline[J].Oil & Gas Storage and Transportation,2005,24(11):51.[doi:10.6047/j.issn.1000-8241.2005.07.015]
[7]署恒木.薄壁管道表面裂纹的应力强度因子计算[J].油气储运,2001,20(3):25.[doi:10.6047/j.issn.1000-8241.2001.03.007]
 Shu Hengmu.Stress Intensity Factors for Surface Cracks in Thin Pipes[J].Oil & Gas Storage and Transportation,2001,20(11):25.[doi:10.6047/j.issn.1000-8241.2001.03.007]
[8]董绍华,吕英民.螺旋焊管焊缝区Ⅰ/Ⅱ型裂纹R阻力曲线的确定[J].油气储运,2000,19(5):26.[doi:DOI:10.6047/j.issn.1000-8241.2000.05.008]
 Dong Shaohua,Lv Yingmin.The Determination of R Resistance on the Ⅰ/Ⅱ Cracks of Spiral Welded Pipe in Welding Line Zone[J].Oil & Gas Storage and Transportation,2000,19(11):26.[doi:DOI:10.6047/j.issn.1000-8241.2000.05.008]
[9]谷鸣.中洛复线电动阀门壳体开裂的原因分析[J].油气储运,2000,19(9):38.[doi:DOI:10.6047/j.issn.1000-8241.2000.09.010]
 Gu Ming.Case Analysis on Valve Casing Cracking in Zhong-Luo Parallel Oil Pipeline[J].Oil & Gas Storage and Transportation,2000,19(11):38.[doi:DOI:10.6047/j.issn.1000-8241.2000.09.010]
[10]David L. Culbertson.应力腐蚀开裂在线检测器的研究[J].油气储运,1997,16(11):54.[doi:10.6047/j.issn.1000-8241.1997.11.019]
 David L. Culbertson.Research Seeks In-line Device to Find and Size Stress Cracks[J].Oil & Gas Storage and Transportation,1997,16(11):54.[doi:10.6047/j.issn.1000-8241.1997.11.019]

备注/Memo

收稿日期:2008-11-17。
作者简介:冯庆善,高级工程师,1974年生,毕业于北京航空航天大学腐蚀与防护专业,现任中国石油管道研究中心副主任,主要从事管道完整性技术研究及应用工作.065000,河北省廊坊市金光道51号;电话:(0316)2176749.

更新日期/Last Update: 1900-01-01