[1]狄向东,张德文,刘滨,等.天然气计量检定站施工工序的关键点[J].油气储运,2016,35(6):667-670.[doi:10.6047/j.issn.1000-8241.2016.06.019]
 DI Xiangdong,ZHANG Dewen,LIU Bin,et al.Key points in the construction process of natural gas metrological verification stations[J].Oil & Gas Storage and Transportation,2016,35(6):667-670.[doi:10.6047/j.issn.1000-8241.2016.06.019]
点击复制

天然气计量检定站施工工序的关键点

参考文献/References:

[1] 赵士海,刘博韬. 天然气计量检定技术现状及进展[J].当代化工,2015(5):1123-1125. ZHAO S H, LIU B T. Current situation and development of the natural gas metrological verification technology[J].Contemporary Chemical Industry,2015(5):1123-1125.
[2] 张春杰,李振林,董新利,等. 天然气计量检定站检定流程工艺模拟研究[J].北京石油化工学院学报,2014,22(2):40-44. ZHANG C J, LI Z L, DONG X L, et al. A simulation study on calibration process of gas metering station[J].Journal of Beijing Institute of Petro-chemical Technology,2014,22(2):40-44.
[3] 郭亮,闫文灿. 天然气流量计检定台位系统设计及使用[J].计量与测试技术,2013,40(12):5-7,9. GUO L, YAN W C. The system design and application of natural gas flowmeter calibration console[J].Metrology & Measurement Technique,2013,40(12):5-7,9.
[4] 赵孟卿,黄坤,王劲松,等. 基于MATLAB天然气流量计检定工艺计算[J].石油与天然气化工,2013,42(4):412-415 ZHAO M Q, HUANG K, WANG J S, et al. Process calculation of natural gas flow meter verification based on MATLAB[J].Chemical Engineering of Oil and Gas,2013,42(4):412-415
[5] 陈超. 高精度气体流量标准装置的建立[D].天津:天津大学, 2012:1-2. CHEN C. Establish of high accuracy air flow standard facility[D].Tianjin:Tianjin University,2012:1-2.
[6] 史昊,王敷智. 国家石油天然气大流量计量站检定工艺的优化[J].油气储运,2015,34(1):96-99. SHI H, WANG F Z. Optimization of verification process in national large oil/gas flowrate metering stations[J].Oil & Gas Storage and Transportation,2015,34(1):96-99.
[7] 王勇,王晓霖,张松伟. 基于HPPP法的Pigsar天然气流量计检定站工艺[J].油气储运,2015(9):988-992. WANG Y, WANG X L, ZHANG S W. HPPP-based pigsar gas flowmeter calibration facility[J].Oil & Gas Storage and Transportation,2015(9):988-992.
[8] 高志国,朱瑞苗,吴佳,等. 天然气实流检定原级标准装置的设计研究[J].石油化工自动化,2014,50(6):13-16. GAO Z G, ZHU R M, WU J, et al. Design and research on actual flow calibration primary standard device of natural gas[J].Automation in Petro-Chemical Industry,2014,50(6):13-16.
[9] 郭亮. 天然气计量检定站的设计概要[J].中国计量,2014(3):47-49. GUO L. Design outline of natural gas metering and verification station[J].China Metrology,2014(3):47-49.
[10] 王劲松. 大口径天然气流量计检定工艺流程研究[D].成都:西南石油大学,2012:30-40. WANG J S. Verification process of large diameter natural gas flow meter[D].Chengdu:Southwest Petroleum University, 2012:30-40.
[11] 倪超,马洪新,唱永磊,等. 荔湾3-1气田输气管道排水干燥工艺设计与应用[J].中国海上油气,2015,27(1):107-110. NI C, MA H X, CHANG Y L, et al. Design and application of dewatering and drying techniques for gas pipeline in LW3-1 gas field[J].China Offshore Oil and Gas,2015,27(1):107-110.
[12] 黄春芳,陈燕,周芳,等. 石油天热气管道站内管道爆破吹扫[J].油气储运,2012,31(12):934-936. HUANG C F, CHEN Y, ZHOU F, et al. Bursting purge method in stations of oil and gas pipeline[J].Oil & Gas Storage and Transportation,2012,31(12):934-936.

相似文献/References:

[1]王勇,王晓霖,张松伟.基于HPPP法的Pigsar天然气流量计检定站工艺[J].油气储运,2015,34(9):988.[doi:10.6047/j.issn.1000-8241.2015.09.014]
 WANG Yong,WANG Xiaolin,ZHANG Songwei.HPPP-based Pigsar gas flowmeter calibration facility[J].Oil & Gas Storage and Transportation,2015,34(6):988.[doi:10.6047/j.issn.1000-8241.2015.09.014]
[2]易冲冲,王文,卢超.隐式拟合在天然气热力性质计算中的应用[J].油气储运,2014,33(3):283.[doi:10.6047/j.issn.1000-8241.2014.03.013]
 YI Chongchong,WANG Wen,LU Chao.Application of implicit curve-fitting in the calculation of thermodynamic property of natural gas[J].Oil & Gas Storage and Transportation,2014,33(6):283.[doi:10.6047/j.issn.1000-8241.2014.03.013]
[3]闫文灿,徐明.移动式天然气流量标准装置的研制与应用[J].油气储运,2014,33(4):418.[doi:10.6047/j.issn.1000-8241.2014.04.016]
 YAN Wencan,XU Ming.Development and application of mobile gas flowrate calibration equipment[J].Oil & Gas Storage and Transportation,2014,33(6):418.[doi:10.6047/j.issn.1000-8241.2014.04.016]
[4]廖柯熹,肖杰,朱勇,等.海底天然气管道多相流动与腐蚀状况分析[J].油气储运,2014,33(6):653.[doi:10.6047/j.issn.1000-8241.2014.06.018]
 LIAO Kexi,XIAO Jie,ZHU Yong,et al.Multiphase flow and corrosion analysis of subsea gas pipeline[J].Oil & Gas Storage and Transportation,2014,33(6):653.[doi:10.6047/j.issn.1000-8241.2014.06.018]
[5]冯亮.天然气管道投产充压时间的预测[J].油气储运,2016,35(1):59.[doi:10.6047/j.issn.1000-8241.2016.01.011]
 FENG Liang.Prediction of pressurizing time for commissioning of natural gas pipeline[J].Oil & Gas Storage and Transportation,2016,35(6):59.[doi:10.6047/j.issn.1000-8241.2016.01.011]
[6]郝晓晨.省域天然气产业发展思路探索[J].油气储运,2014,33(7):701.[doi:10.6047/j.issn.1000-8241.2014.07.004]
 HAO Xiaochen.Expected development of provincial gas industry[J].Oil & Gas Storage and Transportation,2014,33(6):701.[doi:10.6047/j.issn.1000-8241.2014.07.004]
[7]吴华,肖博文,彭宇,等.共用调压系统对特殊用户计量的影响[J].油气储运,2015,34(1):100.[doi:10.6047/j.issn.1000-8241.2015.01.021]
 WU Hua,XIAO Bowen,PENG Yu,et al.Effect of common pressure regulating system on metering for special users[J].Oil & Gas Storage and Transportation,2015,34(6):100.[doi:10.6047/j.issn.1000-8241.2015.01.021]
[8]王俊奇 李启锋 郑欣.天然气资源协调优化理论模型[J].油气储运,2016,35(预出版):1.
 WANG Junqi,LI Qifeng,ZHENG Xin.Natural gas resource coordination and optimization model[J].Oil & Gas Storage and Transportation,2016,35(6):1.
[9]刘金艳,侯磊,李丽敏,等.天然气地下储气库可靠性评价方法[J].油气储运,2015,34(2):171.[doi:10.6047/j.issn.1000-8241.2015.02.012]
 LIU Jinyan,HOU Lei,LI Limin,et al.Reliability evaluation method of underground gas storage[J].Oil & Gas Storage and Transportation,2015,34(6):171.[doi:10.6047/j.issn.1000-8241.2015.02.012]
[10]王勇,王晓霖,张松伟.基于 HPPP 法的 Pigsar 天然气流量计检定站工艺[J].油气储运,2016,35(预出版):1.
 WANG Yong,WANG Xiaolin,ZHANG Songwei.HPPP-based Pigsar gas flowmeter calibration facility[J].Oil & Gas Storage and Transportation,2016,35(6):1.
[11]狄向东 张德文 刘滨 许庆元 刘骁.天然气计量检定站施工工序的关键点[J].油气储运,2016,35(预出版):1.
 DI Xiangdong,ZHANG Dewen,LIU Bin,et al.Key points in the construction process of natural gas metrological verification stations[J].Oil & Gas Storage and Transportation,2016,35(6):1.

备注/Memo

收稿日期:2015-04-11;改回日期:2016-02-23。
作者简介:狄向东,男,助理工程师,1987年生,2013年硕士毕业于东北石油大学油气储运工程专业,现主要从事油气管道及站场建设研究工作。地址:江苏省徐州市泉山区南三环路124号中国石油天然气管道第二工程公司,221000。电话:18361254533,Email:dixiangdong@126.com

更新日期/Last Update: 1900-01-01