[1]刘楠,张宏旺1,李钟全,等.矩形储液箱静水压模态仿真分析与材料比选[J].油气储运,2011,30(11):837-841.[doi:10.6047/j.issn.1000-8241.2011.11.011]
 Liu Nan,Zhang Hongwang,Li Zhongquan,et al.The modal simulation of hydrostatic pressure and comparison of material for rectangle storage box[J].Oil & Gas Storage and Transportation,2011,30(11):837-841.[doi:10.6047/j.issn.1000-8241.2011.11.011]
点击复制

矩形储液箱静水压模态仿真分析与材料比选

参考文献/References:

[1] 吕敬,李俊峰,王天舒. 平动矩形贮箱刚-液耦合非线性动力学研究[J]. 工程力学2007,24(2):1-8.
[2] 陈科,李俊峰,王天舒. 矩形贮箱内液体非线性晃动动力学建模与分析[J]. 力学学报,2005,37(5):339-345.
[3] 黄镭勇. 面向某轿车白车身的模态与试验分析[J]. 安徽建筑工业学院学报(自然科学版),2010,18(7):96-99.
[4] 李腾腾,钟绍华.Ansys 的发动机连杆的模态分析[J]. 汽车工程师,2010(4):25-32.

相似文献/References:

[1]马业华,何东升.X80钢级大口径三通应力分析与结构优化[J].油气储运,2010,29(1):62.[doi:10.6047/j.issn.1000-8241.2010.01.019]
 Ma Yehua,He Dongsheng.Stress Analysis and Structure Optimization on Large Diameter X80 Tee Joints[J].Oil & Gas Storage and Transportation,2010,29(11):62.[doi:10.6047/j.issn.1000-8241.2010.01.019]
[2]曲晓建,李玉坤,段冠,等.大型储罐罐底及边缘板应力分析方法的对比[J].油气储运,2011,30(12):919.[doi:10.6047/j.issn.1000-8241.2011.12.012]
 Qu Xiaojian,Li Yukun,Duan Guan,et al.Contrast of stress analysis methods for the bottom and annular plate of large-scale tank[J].Oil & Gas Storage and Transportation,2011,30(11):919.[doi:10.6047/j.issn.1000-8241.2011.12.012]
[3]肖能 阎军 卢青针 杨志勋 岳前进.钢管脐带缆拉伸行为的有限元分析[J].油气储运,2012,31(3):199.[doi:10.6047/j.issn.1000-8241.2012.03.012]
 Xiao Neng,Yan Jun,Lu Qingzhen,et al.Finite element analysis for steel tube umbilical cable under axial tension[J].Oil & Gas Storage and Transportation,2012,31(11):199.[doi:10.6047/j.issn.1000-8241.2012.03.012]
[4]李荣光,冯庆善,王学力,等.B型全封闭钢质套筒修复技术改进[J].油气储运,2010,29(10):755.[doi:10.6047/j.issn.1000-8241.2010.10.009]
 Li Rongguang,Feng Qingshan,Wang Xueli.Improvement on Remediation Technology for Type B Full-encirclement Steel Sleeves[J].Oil & Gas Storage and Transportation,2010,29(11):755.[doi:10.6047/j.issn.1000-8241.2010.10.009]
[5]石红艳,汪涛,郑维兵,等.弥散型腐蚀管道氢致微裂纹扩展的有限元分析[J].油气储运,2010,29(6):451.[doi:10.6047/j.issn.1000-8241.2010.06.015]
 Shi Hongyan,Wang Tao,Zheng Weibing.Finite Element Analysis on Diffusion Growth of HIC Micro-cracks for Corroded Pipeline[J].Oil & Gas Storage and Transportation,2010,29(11):451.[doi:10.6047/j.issn.1000-8241.2010.06.015]
[6]段庆全,于国鹏,张宏.基于有限元的内腐蚀管道极限压力计算[J].油气储运,2009,28(7):21.[doi:DOI:10.6047/j.issn.1000-8241.2009.07.006]
 DUAN Qingquan,YU Guopeng.Finite Element Method to Calculate Extreme Pressure of Internal Corroded Pipeline[J].Oil & Gas Storage and Transportation,2009,28(11):21.[doi:DOI:10.6047/j.issn.1000-8241.2009.07.006]
[7]惠虎,宋虎堂,吴云龙,等.大型原油储罐的有限元强度分析[J].油气储运,2004,23(12):21.[doi:DOI:10.6047/j.issn.1000-8241.2004.12.006]
 HUI Hu,SONG Hutang.Finite Element Intensity Analysis for Large Oil Tank[J].Oil & Gas Storage and Transportation,2004,23(11):21.[doi:DOI:10.6047/j.issn.1000-8241.2004.12.006]
[8]潘红良.带导热胶泥伴热管道传热性能的有限元分析[J].油气储运,2004,23(8):9.[doi:DOI:10.6047/j.issn.1000-8241.2004.08.003]
 PAN Hongliang.Finite Element Analysis on the Heat Transfer Characteristics of Heating Tracer with Heat Transfer Cement[J].Oil & Gas Storage and Transportation,2004,23(11):9.[doi:DOI:10.6047/j.issn.1000-8241.2004.08.003]
[9]李明忠,丁克勤,张有忱.油气输送管道漏磁检测的有限元分析[J].油气储运,2003,22(5):14.[doi:DOI:10.6047/j.issn.1000-8241.2003.05.004]
 LI Mingzhong,DING Keqin.Analysis of FEA in Ma gnetic Flux Leakage Detecting of Oil and Gas Transport Pipeline Network[J].Oil & Gas Storage and Transportation,2003,22(11):14.[doi:DOI:10.6047/j.issn.1000-8241.2003.05.004]
[10]尹晔昕,王瑜.大型拱顶储罐的有限元计算[J].油气储运,2003,22(1):23.[doi:DOI:10.6047/j.issn.1000-8241.2003.01.006]
 YIN Yexin,WANG Yu.FEM Calculation on Large-scale Storage Tank with Dome Roofs[J].Oil & Gas Storage and Transportation,2003,22(11):23.[doi:DOI:10.6047/j.issn.1000-8241.2003.01.006]

备注/Memo

作者简介:刘楠,工程师,在读博士生,1981 年生,2006 年硕士毕业于解放军后勤工程学院油气储运工程专业,现主要从事液体机械
与装备相关技术的研究工作。电话:13426055989;Email:liunanchina@tom.com(收稿日期:2010-04-20)

更新日期/Last Update: