[1]徐诚,黄启玉,黄小娟,等.破乳剂对含水稠油流变性的影响[J].油气储运,2010,29(9):664-664,672.[doi:10.6047/j.issn.1000-8241.2010.09.006]
 Xu Cheng,Huang Qiyu,Huang Xiaojuan.Influence of Demulsifier on the Rheology of Water-content Heavy Crude Oil[J].Oil & Gas Storage and Transportation,2010,29(9):664-664,672.[doi:10.6047/j.issn.1000-8241.2010.09.006]
点击复制

破乳剂对含水稠油流变性的影响

参考文献/References:

[1] 罗哲鸣,李传宪.原油流变性及测量[M].东营:石油大学出版社,1994:75-96.
[2] 张劲军.含蜡原油添加降凝剂输送中剪切作用的影响和模拟[D].北京:中国石油大学,1998.

相似文献/References:

[1]孟江,张其敏,肖和平,等.无机盐对 O/W 型稠油乳状液乳滴形态和流变性的影响[J].油气储运,2011,30(01):43.[doi:10.6047/j.issn.1000-8241.2011.01.012]
 Meng Jiang,Zhang Qimin,Xiao Heping,et al.The influence of inorganic salt on emulsion droplet shape and rheological properties of W/O viscous oil emulsion[J].Oil & Gas Storage and Transportation,2011,30(9):43.[doi:10.6047/j.issn.1000-8241.2011.01.012]
[2]盖平原.稠油管输起始加热温度熵产最小优化设计[J].油气储运,2011,30(07):501.[doi:10.6047/j.issn.1000-8241.2011.07.006]
 Gai Pingyuan.Entropy generation minimization optimization design for starting heating temperature of heavy oil in pipeline[J].Oil & Gas Storage and Transportation,2011,30(9):501.[doi:10.6047/j.issn.1000-8241.2011.07.006]
[3]刘德生,宫敬,吴海浩,等.三相流动条件下的油水混合物粘度[J].油气储运,2011,30(02):107.[doi:10.6047/j.issn.1000-8241.2011.02.007]
 Liu Desheng,Gong Jing,Wu Haihao,et al.Viscosity of oil-water mixtures in three-phase flow[J].Oil & Gas Storage and Transportation,2011,30(9):107.[doi:10.6047/j.issn.1000-8241.2011.02.007]
[4]罗会玖,李静,王义,等.中洛管道混合原油凝点和粘度的测量与计算[J].油气储运,2011,30(02):141.[doi:10.6047/j.issn.1000-8241.2011.02.016]
 Luo Huijiu,Li Jing,Wang Yi,et al.Measurement and calculation of gel point and viscosity of blended crude oil in Zhong-Luo oil pipeline[J].Oil & Gas Storage and Transportation,2011,30(9):141.[doi:10.6047/j.issn.1000-8241.2011.02.016]
[5]田茂昌 敬加强 万捷 谢怡宁 李丹.稠油-水两相流乳化条件的实验模拟[J].油气储运,2012,31(4):250.[doi:10.6047/j.issn.1000-8241.2012.04.003]
 Tian Maochang,Jing Jiaqiang,Wan Jie,et al.Experimental simulation of emulsification condition of heavy oil/water two-phase flow[J].Oil & Gas Storage and Transportation,2012,31(9):250.[doi:10.6047/j.issn.1000-8241.2012.04.003]
[6]李汉勇,宫敬,雷俊勇,等.压力对含水原油析蜡过程的影响[J].油气储运,2010,29(7):494.[doi:10.6047/j.issn.1000-8241.2010.07.005]
 Li Hanyong,Gong Jing,Lei Junyong.Influence of Pressure on Wax Deposition Course of Wet Oil[J].Oil & Gas Storage and Transportation,2010,29(9):494.[doi:10.6047/j.issn.1000-8241.2010.07.005]
[7]左丽丽,吴长春,顿宏峰,等.某热稠油管道的水力特性分析[J].油气储运,2008,27(6):19.[doi:10.6047/j.issn.1000-8241.2008.06.005]
 ZUO Lili,WU Changchun.The Hydraulic Characteristics of a Heated Heavy Crude Pipeline[J].Oil & Gas Storage and Transportation,2008,27(9):19.[doi:10.6047/j.issn.1000-8241.2008.06.005]
[8]孟庆萍,刘升文.MEK-石脑油可回收稀释降粘输送工艺[J].油气储运,2008,27(2):27.[doi:10.6047/j.issn.1000-8241.2008.02.008]
 MENG Qingping,LIU Shengwen.Transportation Process of Recoverable Naphtha with Methyl Ethyl Ketone (MEK) to Dilute Heavy Crude[J].Oil & Gas Storage and Transportation,2008,27(9):27.[doi:10.6047/j.issn.1000-8241.2008.02.008]
[9]孟庆萍,杜彪.Lederer粘度模型适用范围[J].油气储运,2007,26(12):29.[doi:10.6047/j.issn.1000-8241.2007.12.008]
 MENG Qingping,DU Biao.Research on the Applicability of Lederer Viscosity Model[J].Oil & Gas Storage and Transportation,2007,26(9):29.[doi:10.6047/j.issn.1000-8241.2007.12.008]
[10]李美蓉,向浩,刘慧英,等.郑王稠油乳化降粘集输工艺[J].油气储运,2007,26(5):11.[doi:10.6047/j.issn.1000-8241.2007.05.003]
 LI Metrong,XIANG Hao.Study on the Techniques of Gathering and Transportation Viscous Oils from ZhengWang as Emulsion and Visbreaking[J].Oil & Gas Storage and Transportation,2007,26(9):11.[doi:10.6047/j.issn.1000-8241.2007.05.003]
[11]刘天佑,徐诚.稠油稀释后粘度的计算方法及其改进[J].油气储运,1992,11(2):56.[doi:10.6047/j.issn.1000-8241.1992.02.017]

备注/Memo

收稿日期:2009-9-30。
作者简介:徐诚,高级工程师,1968年生,1998年硕士毕业于石油大学(北京)油气储运工程专业,现主要从事原油管道长距离输送技术和原油化学添加剂应用技术的研究工作.电话:13722653000.E-mail:xu_cheng@cnpc.com.cn

更新日期/Last Update: 1900-01-01